Thank you for looking at Ahooga's Classified Ads.
I hope you can either buy, sell or trade something here to help along your
(and others) Model-A Hobby.
You can ADD your own Classified Item(s) by clicking here! ADD CLASSIFIED ITEM
You can VIEW User FAQ of rules for the Classified Ads VIEW USER FAQ and learn about Internet Fraud.
To REMOVE your Classified Item(s) click here to send me an E-mail with the Ad Number to delete! REMOVE CLASSIFIED ITEM
There is no charge for using Ahooga Classified Ads however, if your happy with Ahooga's Classified Ad service please donate a little bit to help keep Ahooga going for providing this service.
Go to Ahooga's Donation Page
or go buy a small Ahooga Logo Item from the
Ahooga Online Store
you can use and help support this site.
If Ahooga would have received just $1 for each ad placed since the Classified Ads were started on July 07, 2002 Ahooga would have paid for itself totally during this time! Disk space, bandwidth and hosting costs!
Think about this and support Ahooga, Your Model-A Ford Friend on the Internet....
'Ahooga Around The World' visitor map!
Wanted (Ad #8963)
Looking for the 30-31 AA universal, 10 spline to the drive shaft and 6 spline to the Hi/Lo trans. 28-29 AA universal wont work. It
fits the Hi/Lo on the 6 spline but is a hair too small for the 30-31 AA drive shaft. Fits the 29 AA drive shaft just fine. Need the 30-31
Posted by: gary ellingson, from sunnyside, wa 98944 USA
Posted on Thursday, September 02, 2010 at 22:31:50 (EDT)
For Sale (Ad #8962)
1930 fordor briggs body. Has supper excelent body, 2) cowls new wood to be installed with all panels, pans, and brackets. Has clear Wa title with proper correct license plate to match. asking
$1200. If your looking for a fordor, this is the one to do. A second briggs 29 fordor body mostly all there needs wood and also has a 4 dr title as a bonus. Need to make room
Posted by: gary ellingson, from sunnyside, wa 98944 USA
Posted on Thursday, September 02, 2010 at 22:22:50 (EDT)
For Sale (Ad #8961)
slant back trunk for model a sedan, older but nice $50.00.also have a distributor with Modern upper and lower plates complete ready to install $50.00 call 8603771285.
Posted by: larry ellison, from lisbon, ct. USA
Posted on Thursday, September 02, 2010 at 15:29:44 (EDT)
Wanted (Ad #8960)
In need of front seat frame for my '31 s/w model A fordor town sedan. Someone has to have one out there, please "part" with it :)
Posted by: Kristen, from Palm, PA USA
Posted on Wednesday, September 01, 2010 at 15:47:37 (EDT)
For Sale (Ad #8959)
1923 Ford Model T, roadster coupe, restoration started, needs paint& leather on convertible top, interior wood been replaced & the wood on the spoke wheels,motor rebuilt several years ago been in storage since, $6000. Cash (NO CHECKS) email; thriftysaver@hotmail.com
Posted by: a l, from lincoln, ne USA
Posted on Tuesday, August 31, 2010 at 22:01:46 (EDT)
The Website is http://www.freewebs.com/thriftysaver
For Sale (Ad #8958)
1931 Rebuilt Engine Complete longblock 20 over new pistons crank 20 under . Machine work and new rebabbitted rods by" Rons Machine"Includes head and oil pan . Never fired !$2,500 no exchange needed. Steve 513 571 5276. Pick up here no shipping . Between Cinn. and Dayton.
Posted by: Steve Gillie, from Springboro, Ohio USA
Posted on Tuesday, August 31, 2010 at 13:00:40 (EDT)
Wanted (Ad #8957)
looking for Model A Ford spoke tool to straighten spokes
reply mcmimmcs@mnsi.net
Posted by: wayne mcmichael, from port huron, michigan USA
Posted on Tuesday, August 31, 2010 at 11:07:38 (EDT)
For Sale (Ad #8956)
FOR SALE: Model C head with 3 bolt water pump core. $125 plus shipping. Excellent condition.
Posted by: Keith Painter, from Bountiful, UT USA
Posted on Saturday, August 28, 2010 at 18:54:23 (EDT)
For Sale (Ad #8955)
2 Original Ahooga Horns, 6 volt and 12 volt. Model A Ahooga Horns that has been beautifully restored and rewound and one converted to a 12 Volts system. Completely and correctly restored. The armatures and field coils have been rewound to like new condition. Will work on any 1928 to 1931 Ford Model A. Correctly tuned and comes complete with correct mounting brackets. Also, have other horns. Each is ready to mount and Ahooga at everyone you meet. Pictures available. Take your choice. Free shipping to your door in the lower 48. Thanks for the visit. Neil
Posted by: Neil, from The Sunny South, MS USA
Posted on Saturday, August 28, 2010 at 06:04:42 (EDT)
For Sale (Ad #8954)
4 new cast iron brake drums - 2 fronts and 2 rears. $260.00 plus shipping. Researched and written up in "Model A Times" for their fine quality. Pictures and article available upon request. Please include your zip code when responding so that we can determine the shipping cost. E-mail me at melmodela@aol.com or call me at (714) 292-8660 or (323)728-5712 for more info.
Posted by: Mel Gross, from Montebello, CA USA
Posted on Friday, August 27, 2010 at 19:07:02 (EDT)
For Sale (Ad #8953)
Improve the steering in your Model A by installing one of my F100 steering boxes. The box has beem modified to fit your vehicle the same way the original steering box fits. There are no alteration, drilling, etc. It bolts right in. New interior parts. Written up in most recent edition of "Model A Times". Prices vary for 1928-29 and 1930-31. For more info, please include the year of your vehicle. Pictures and "Model A Times" article available to send. E-mail me at melmodela@aol.com or call me at (714) 292-8660 or (323)728-5712.
Posted by: Mel Gross, from Montebello, CA USA
Posted on Friday, August 27, 2010 at 19:06:09 (EDT)
For Sale (Ad #8952)
The klaxon horn in ad bellow is a 20-30s electromagnetic non ford. Thanks neil for info!!
Posted by: ray torres, from hudson, fl. USA
Posted on Friday, August 27, 2010 at 15:08:53 (EDT)
Wanted (Ad #8951)
Looking to find the following ORIGINAL 1931 parts:
Generator band with L 5 stamped on it
Good working Rumble/Decklid locking handle ( I have the cylinder)
Center bumper clamp complete.
Working Ford script Cutout
Original License plate clamps for headlight bar.
Please email me direct with pictures and price Ford68C@aol.com
Posted by: Joop, from Boston, MA USA
Posted on Friday, August 27, 2010 at 06:24:42 (EDT)
Wanted (Ad #8950)
Looking for accessories both Ford and unauthorized [ from the book] any help
Posted by: Noel Cleveland, from Vancouver, BC Canada
Posted on Thursday, August 26, 2010 at 21:59:47 (EDT)
For Sale (Ad #8949)
1930 Ford Sport Coupe,, good running original motor with dual updraft carbs. Runs and looks good with modifications similar to a 1950's built hot rod. $11,500.00 OBO.
Posted by: virgil obrien, from millville, nj USA
Posted on Thursday, August 26, 2010 at 19:19:51 (EDT)
For Sale (Ad #8948)
28-31 dist. modern style points, $85.00 6volt Xlaxson horn DelcoRemy with mount(very nice) $50.00-- Modern style shock kit complete (never mounted) look in model a catalougs they sell for $341.00 + shipping!! Asking $285.00,(Free Shipping Shocks are black)--Have other misc. parts No sheet metal!! 727-856-1522
Posted by: ray torres, from hudson, fl. USA
Posted on Thursday, August 26, 2010 at 18:59:59 (EDT)
For Sale (Ad #8947)
1929 Special Coupe complete body restoration 2008,professionally painted,base coat,clear coat. Vagabond Green,Rock Moss Green,Straw pinstripe.New White wall tires,battery,electrical,stone guard,interior,top,and much more.Less than 200 miles since restoration.E-mail rlaustin29@comcast.net for pictures or call 814-229-3680.This is a beautiful SHOW CAR.
Posted by: Ray Austin, from Clarion, PA USA
Posted on Thursday, August 26, 2010 at 16:27:08 (EDT)
For Sale (Ad #8946)
16" rims/ 6 ea $30.00 ea
can pick up or you pay for freight
Posted by: Archie Bardwell, from Torrington, Ct USA
Posted on Wednesday, August 25, 2010 at 20:23:11 (EDT)
For Sale (Ad #8945)
1932 CT plates FS 607
1926 Ma.plates 39.642
1927 Ma. plates 250.344
1928 Ma. plates 39.642
1935 Ma. plates 39.642
all plates are in pairs/$50.00 ea pair
Posted by: Archie Bardwell, from Torrington, Ct USA
Posted on Wednesday, August 25, 2010 at 20:18:06 (EDT)
For Sale (Ad #8944)
Model B or Model C Leakless Water pump. I installed this pump and ran it on my car less than a week. It rubbed on my after market fan, so I ground a small piece of the collar off. Still rubbed, so I swapped it for a different pump / fan combination. This pump is like new, except for the part that was ground off, which is hidden from view by the fan. Will work great for someone with a stock B or C fan. $100
Posted by: Brian, from Sunnyvale, CA USA
Posted on Tuesday, August 24, 2010 at 23:14:12 (EDT)
Wanted (Ad #8943)
just starting on my '29 roadster pickup. Looking for front fenders...and I am sure someone has several sets of good solid doors and will sell a set. My rear fenders need some work...so a good set at the right price will interest me.
cell phone 224-217-3637
Posted by: marty, from Palatine(chicago), IL USA
Posted on Monday, August 23, 2010 at 17:09:52 (EDT)
Wanted (Ad #8942)
I need the screw on type hub cap for a 31 AA Truck, I am restoring a truck now and need one in good condition.
Thanks
Gerald Grizzard
Posted by: Gerald Grizzard, from Oxford, Alabama USA
Posted on Sunday, August 22, 2010 at 21:54:02 (EDT)
Wanted (Ad #8939)
I would like to buy an entire set of Illustrator Howard Barnes, who completed a set of Exploded views of All Model A parts.
Thanks, sunny
Posted by: sunny, from tehachapi, ca USA
Posted on Saturday, August 21, 2010 at 19:59:25 (EDT)
For Sale (Ad #8938)
Original Ahooga Horns, Model A Ahooga Horns that has been beautifully restored and rewound and one converted to a 12 Volts system. Completely and correctly restored. The armatures and field coils have been rewound to like new condition. Will work on any 1928 to 1931 Ford Model A. Correctly tuned and comes complete with correct mounting brackets. Also, have other horns. Each is ready to mount and Ahooga at everyone you meet. Pictures available. Free shipping to your door in the lower 48. Thanks for the visit. Neil
Posted by: Neil, from The Sunny South, MS USA
Posted on Saturday, August 21, 2010 at 08:49:58 (EDT)
Wanted (Ad #8937)
Looking for Model A front tool box, 19 inch beauty rings, tan colored trunk, model a clock, and stainless steel spoke covers for 30-31 email wayne at mcmimmcs@mnsi.net
Posted by: wayne mcmichael, from Port Huron, michigan USA
Posted on Thursday, August 19, 2010 at 22:09:52 (EDT)
For Sale (Ad #8936)
Front spring spreader $35
Rear spring spreader $65
Both for $95.
***
Front tube shock kit
Top bracket mounts to original shock bolt holes.
Lower attachment requires drilling 1 hole per side in axle.
Never used. $145 + $11 Flat Rate shipping.
***
Model A front axle
Sand blasted & painted with POR-15.
Two holes were drilled for modern shock mounting - easily welded. $50
***
Front spring - 10 leaf
Rebuilt from original springs, so leaves are correct contour.
Lubricated with cup grease & Teflon tape between all leaves.
Any worn areas where leaves contact were blended for free motion.
Measurements with spring off axle & standing on floor:
5 5/8 floor-to-bottom of lower leaf.; 30 ½ eye to eye centers.
Includes clamps, covers & new bushings.
Some pitting, but crossmember & covers hide almost all. $100
***
Rear spring - 9 leaf
Rebuilt from original springs, so leaves are correct contour.
Lubricated with cup grease & Teflon tape between all leaves.
Any worn areas where leaves contact were blended for free motion.
Measurements with spring off axle & standing on floor:
15 1/4 floor-to-bottom of lower leaf.; 40 1/8 eye to eye centers.
Includes clamps & covers. NO bushings. 9 leaves for a little softer ride.
Some pitting, but crossmember & covers hide almost all. $200
PICTURES AVAILABLE
Posted by: James Andrews, from Siler City, NC USA
Posted on Thursday, August 19, 2010 at 18:37:35 (EDT)
For Sale (Ad #8935)
For Sale: Pair of NEW, STEEL, front welled (for sidemounts) 1930 and 1931 fenders. These were made by Gaslight Auto and currently sell for about 600.00 each and there is usually a wait to get them. These are brand new, never mounted or painted. I will take 575.00 for the PAIR plus shipping. 734-730-4274 or motoringicons@hotmail.com I accept PAYPAL, checks, etc. Thanks!
Posted by: GZ, from Detroit, MI USA
Posted on Thursday, August 19, 2010 at 12:00:55 (EDT)
Wanted (Ad #8934)
wanted 1928-30 Model A Ford Oval SW Speedometer
Posted by: dave, from leechburg, pa USA
Posted on Tuesday, August 17, 2010 at 20:38:56 (EDT)
For Sale (Ad #8933)
ford script tools for model a fords one set with bag $75.00 will ship call 8603771285.
Posted by: larry Ellison, from lisbon, ct. USA
Posted on Tuesday, August 17, 2010 at 09:00:59 (EDT)
For Sale (Ad #8932)
ford script oil can to install on firewall $30.00 will ship call 8603771285
Posted by: larry Ellison, from Lisbon, ct. USA
Posted on Tuesday, August 17, 2010 at 08:57:36 (EDT)
For Sale (Ad #8930)
New repro front spring perch (pair), with special nuts.
Black plastic bushing installed (1/2" ID x 11/16" OD).
Fits 1933 & 1934 Ford PU. $75 + $11.50 shipping.
Picture available - Sorry, would not load on this site.
jea777@centurylink.net
Posted by: James Andrews, from Siler City, NC USA
Posted on Monday, August 16, 2010 at 21:23:36 (EDT)
Wanted (Ad #8929)
Trico vacuum fan wanted. The kind that clamps to steering column to use as a fan or a defroster. It gets pretty hot driving this A !. Contact Wayne at mcmimmcs@mnsi.net
Posted by: wayne mcmichael, from Port Huron, Michigan USA
Posted on Monday, August 16, 2010 at 08:34:40 (EDT)
For Sale (Ad #8928)
Ford Model A Engine Newly, Rebuilt Ready to Install
All new bearings, rings, pistons, valves, adjustable lifters, springs and guides. Decked block and head. Balanced, reground cam and crank. All machine work professionally done, with complete records of rebuild, including receipts. Test run and ready to install in your car. Included are all the following extras:
Water pump
Water outlet
Water inlet
Flywheel housing
Spark plugs
Pressure plate
Flywheel
Clutch
Exhaust manifold
Intake manifold
Oil Pan
Oil pump
Front engine mount yoke
Timing scale accessory
$3500 F.O.B. Cleveland, Ohio. You may pick it up, or make your own shipping arrangements. Crating, if desired, will be $150. Photos available.
Dave Goodman, 31870 Hiram Trail, Moreland Hills, OH 44022. (216) 292-6445
Posted by: Dave Goodman, from Moreland Hills, OH USA
Posted on Sunday, August 15, 2010 at 14:45:41 (EDT)
For Sale (Ad #8927)
1930 Model A Sports Coupe. Show winner. Has 2009 Hershey Jr. award going for senior this fall.
Posted by: Charles, from Oneonta, NY USA
Posted on Sunday, August 15, 2010 at 13:04:43 (EDT)
Wanted (Ad #8926)
Need a 1930 Tennessee license plate in good condition.
Posted by: Gary Gregory, from Maryville, Tn USA
Posted on Saturday, August 14, 2010 at 21:39:57 (EDT)
For Sale (Ad #8925)
2 Original Ahooga Horns, 6 volt and 12 volt, Model A Ahooga Horns that has been beautifully restored and rewound and one converted to a 12 Volts system. Completely and correctly restored. The armatures and field coils have been rewound to like new condition. Will work on any 1928 to 1931 Ford Model A. Correctly tuned and comes complete with correct mounting brackets. Also, have other horns. Each is ready to mount and Ahooga at everyone you meet. Pictures available. Take your choice. Free shipping to your door in the lower 48. Thanks for the visit. Neil
Posted by: Neil, from The Sunny South, MS USA
Posted on Saturday, August 14, 2010 at 11:22:15 (EDT)
For Sale (Ad #8922)
Restoration started 1929 Model A Roadster + lots of extra parts
Dual side mounts.
New Lucas tires and tubes (6).
Black powder coated wheels
New Radiator
New grill guard
New body wood
New in box top, top irons, top wood
New in box rumble back
New clutch disc, throwout bearing, pilot bearing, rebuilt pressure plate
New 12 volt alternator
New modern shock kit
New dash, speedometer
New Muffler
New brake rods
I bought this car in 2007 and disassembled it to the frame. Body mocked up on the chassis in pictures. Chassis painted gloss black. Engine turns free but I have not run it. Clear Ohio title matches engine number. Almost ready for sheet metal work and paint.
Extras include spare wheels, 2 rear axle sets, headlight bars, heads, (plus more larger parts), horn, Zenith carbs, Tilly carbs, all books, manuals, and a couple drawers of bagged and unbagged small parts.
$7,500
Slide show of photos @ http://www.flickr.com/photos/1929_roadster/show/
Posted by: Jim Ferguson, from Uniontown, Oh USA
Posted on Thursday, August 12, 2010 at 21:48:05 (EDT)
For Sale (Ad #8920)
I'm selling my 1930 Model A rumble seat coupe. It runs, drives, and stops great. Has original mohair interior that is still in great shape. Engine was rebuilt 13 years ago by the previous owner. He ran it for 1 year, then lost the key. So it sat in his barn until I bought it and got it running again. Everything works great. Newer tires, bumpers, water pump, dist. carb. rebuilt, the only thing this coupe needs is paint. It's a 10 footer. Looks great from 10 feet away. I need to get $12,000. You can call my cell anytime @ 774-991-0559 I can e-mail pictures if your interested. I will also consider a trade for a 30-31 closed cab pickup truck.
Posted by: Daniel Baron, from Seekonk, Ma USA
Posted on Thursday, August 12, 2010 at 09:45:46 (EDT)
Wanted (Ad #8918)
I am looking for tires and tubes for my 1929 Ford Phaeton, wire wheels. 4.50 X 21" The tires on are very old and the tubes are shot. Even the ones that hold air. Thanks for your response.
Posted by: George Bye, from El Cajon, CA USA
Posted on Thursday, August 12, 2010 at 02:29:54 (EDT)
For Sale (Ad #8917)
For Sale: 1930 Deluxe Coupe. This car was restored awhile back to Model A Club standards and today remains in very nice condition. It has one of the straightest Model A bodies I've seen in a long time with excellent panel fit, excellent floors, subframe, straight fenders, etc. It is green with black fenders, black wheels and black tires-it looks the way a Model A should look. The Lebaron Bonney upholstery is like new. It is a real deluxe coupe with the roll down rear window, rumbleseat, mohair interior, wood grain garnish moldings, etc. It has recently been serviced with five new tires, battery, wiring etc and everything works. It starts, runs, steers and brakes great and is ready to use and enjoy. 15,000.00 Calling 734-730-4274 or emailing motoringicons@hotmail.com is the best way to reach me. I have lots of photos I can send.
Posted by: GZ, from Detroit, MI USA
Posted on Thursday, August 12, 2010 at 00:06:12 (EDT)
For Sale (Ad #8916)
1929 Pickup closed cab, Green, runs great, 6v alternator, leakless water pump, no rust, not show just a daily driver. rebuilt carb, spare tires on both wheelwells, has searchlight mounted on drivers side door frame. amber fog lights and white running lights on fenders (not cowl lights) $8,500.00 e-mail for pictures. 702-592-2009
Posted by: Glenn, from boulder city, nv USA
Posted on Wednesday, August 11, 2010 at 13:17:27 (EDT)
For Sale (Ad #8914)
Rebuilt 3.78 rear end with good shock balls and bearing races, no brakes or backing plates,came out of a 30/31 coupe. Pick up only no shipping. $160.00
Posted by: Victor Moore, from Belleville, Mich USA
Posted on Wednesday, August 11, 2010 at 11:34:45 (EDT)
For Sale (Ad #8913)
Selling all Model Parts In barn for $250.00, if not sold soon they will be sold for scrap Iron. Thanks
Posted by: Victor Moore, from Belleville, Mich USA
Posted on Wednesday, August 11, 2010 at 11:31:09 (EDT)
For Sale (Ad #8912)
Klaxon horn Delco-Remy 6Volt 14" with mount 727-856-1522 very good cond.
Posted by: ray torres, from hudson, fl. USA
Posted on Wednesday, August 11, 2010 at 09:04:05 (EDT)
For Sale (Ad #8909)
BAG OF MODEL A PARTS: I have a "Bagful" of 30/31 Model A Parts for sale for $75. All or nothing, please. The bag includes:
1. Fuel Filter
2. Distributor Cap
3. 6 volt coil
4. Steering column Mount Both tank mount and lower cap
5. Gas Gauge with dash and tank pieces
6. Floor Board Cover Plates - 2
7. Radiator Cap or Gas Cap - I am not sure which it is
8. Radiator Filler neck
9. Oil Filler Cap
10. Engine Crank Hole. Held by spring U Bolts
11. Distributor plate w/ points and condensor
12. Dash Light
13. Gas Tank Clamps for orginal cowl mounted tank
14. Ignition switch
I took these parts from a 1930/31 Ford Tudor Sedan. There are several sets of bolts which "I believe" came from the transmission or steering box? Shipping would probbaly cost about $15. in the US.
Posted by: Eugene Novy, from Atlanta, GA USA
Posted on Monday, August 09, 2010 at 18:28:25 (EDT)
Wanted (Ad #8905)
Need door latchs for a 1931 Victoria. Need left and right latchs.
Also need the remotes for same.
Posted by: Al, from Quincy, FL USA
Posted on Monday, August 09, 2010 at 07:36:08 (EDT)
Wanted (Ad #8904)
Looking for Model A Ford scripted 5 inch amber fog lights with brackets. I don't mind aftermarket. Email if you have some or know the source Thanks wayne
mcmimmcs@mnsi.net
Posted by: wayne mcmichael, from port huron, Michigan USA
Posted on Sunday, August 08, 2010 at 23:37:21 (EDT)
Wanted (Ad #8903)
Want to buy K.R.Wilson Multi-Disk Clutch Tool in good shape please.
Thanks, Jerry 904-637-9186
Posted by: Jerry Gentile, from Jacksonville, Florida USA
Posted on Sunday, August 08, 2010 at 14:45:57 (EDT)
For Sale (Ad #8902)
Riley 2 port (Charlie Yapp)-complete-- purchased new 6 or 7 years ago and never used and probably never will. $2400 if you pick up---prefer not to ship
Posted by: H Courtneay, from Bakersfield , CA USA
Posted on Sunday, August 08, 2010 at 14:12:34 (EDT)
Wanted (Ad #8901)
Looking for a 28/29 cowl (gas tank and lower cowl). I prefer one in good shape, but would consider any. Thanks, Neil
Posted by: Neil Mylar, from Lakewood, CA USA
Posted on Sunday, August 08, 2010 at 04:34:59 (EDT)
For Sale (Ad #8900)
1929 FORD MODEL A 4 DOOR BLIND BACK STEEL BACK.
RESTORED DUAL SIDE MOUNTS,TRUNK RACK & TRUNK, 6 NEW TIRES ALL
THE WAY AROUND. CALL MY CELL # 608 751 0311 WITH QUESTIONS.
$18500.00FIRM
Posted by: DICK, from BELOIT, WI USA
Posted on Saturday, August 07, 2010 at 12:13:47 (EDT)
For Sale (Ad #8899)
Lets make a deal now. This car needs to go now. See U.R.L for pictures and price.
Note: This car is in Florida
Thanks,
Jerry
904-637-9186
Posted by: Jerry Gentile, from Jacksonville, Florida USA
Posted on Saturday, August 07, 2010 at 08:51:31 (EDT)
The Website is http://www.a1modela.com/
For Sale (Ad #8896)
NICE Oklahoma 1928 License plate. Best offer!
Posted by: Dave Cline, from Minot, ND USA
Posted on Thursday, August 05, 2010 at 14:22:09 (EDT)
Wanted (Ad #8895)
Need an NOS set of Kingpins for a 31 Ford Pickup.
Posted by: Pete, from Rye, NH USA
Posted on Thursday, August 05, 2010 at 09:05:18 (EDT)
Wanted (Ad #8894)
Looking for a Victory accessory oil pressure gauge and housing for an '29-'30 dash as found in the Unauthorized Accessories for Model A Ford book. Must be good condition and the choke extension rod does not need to be present.
Posted by: Eric, from GLENDALE, CA USA
Posted on Thursday, August 05, 2010 at 02:56:06 (EDT)
Wanted (Ad #8893)
MODEL B CARBURATOR WANTED. PURCHASE OUTRIGHT IF GOOD RUNNING OR IF NEEDING REBUILT. wILL EXCHANGE IF OTHER MOTOR PARTS ARE NEEDED DEPENDING ON CONDITION. THANKS jOHN
Posted by: john , from north kingstown, rhode island USA
Posted on Wednesday, August 04, 2010 at 18:48:34 (EDT)
For Sale (Ad #8892)
FOR SALE:
1 SET 28-29 TUDOR REAR FENDERS ORIGINAL - NO RUST OR ROT
1 SET 30-31 TUDOR SPLASH PANS REPRO.
1 SET 30-31 TUDOR RUNNING BOARDS REPRO.
1 TAIL LIGHT
1 GAS CAP
1 RADIATOR CAP
1 ORIGINAL 28-29 RIM ORIGINAL - SURFACE RUST
MAKE ME AN OFFER FOR EACH... Try2Win04@aol.com
WANTED ORIGINAL 30-31 TUDOR REAR FENDERS
Posted by: Tony, from chicago, il USA
Posted on Tuesday, August 03, 2010 at 22:07:06 (EDT)
For Sale (Ad #8891)
Model A Rear End, with a 3.78 gear ratio for sale. I believe this is a 1930-31 rear end with the reinforced bango housing and the torque tube has a tapered section behind the u-joint housing approximately 14 inches. It has good round perch balls; good threads on the axles; good round spring shackle bushings and good bearing races. This rear end is minus the backing plates and brakes. Pick up only from my home. $200.00
etsaboy@aol.com
Posted by: Victor Moore, from Belleville, MI USA
Posted on Tuesday, August 03, 2010 at 20:47:21 (EDT)
For Sale (Ad #8890)
Set of original 31 Ford front axle struts in very good shape. Slightly modified to give more positive caster to front axle. Will take $50 for the set and freight collect from TN to destination.
Posted by: Kim Ely, from Cleveland, TN USA
Posted on Tuesday, August 03, 2010 at 00:38:56 (EDT)
For Sale (Ad #8889)
Getting rid of all my misc. Model A Parts in barn. Every thing goes. Must be picked up. Too numerous to list. No sheet metal. VMoore3032@aol.com
$400.00
Posted by: Charles Moore, from Belleville, Mich USA
Posted on Sunday, August 01, 2010 at 14:36:56 (EDT)
Wanted (Ad #8887)
I need a closed car windshield frame for a 1930/31 Ford coupe or sedan. I am repairing one for a buddy and have a good top hinge piece. I could use an aluminum one as I also have one cut down 3" that I could put back to full height. I
Thanks, Norm
Posted by: Norm Ahlgrim, from Lexington, Ky. USA
Posted on Saturday, July 31, 2010 at 18:12:05 (EDT)
For Sale (Ad #8886)
2 Original Ahooga Horns, 6 volt and 12 volt, Model A Ahooga Horns that has been beautifully restored and rewound and one converted to a 12 Volts system. Completely and correctly restored. The armatures and field coils have been rewound to like new condition. Will work on any 1928 to 1931 Ford Model A. Correctly tuned and comes complete with correct mounting brackets. Also, have other horns. Each is ready to mount and Ahooga at everyone you meet. Pictures available. Take your choice. Free shipping to your door in the lower 48. Thanks for the visit. Neil
Posted by: Neil, from The Sunny South, MS USA
Posted on Saturday, July 31, 2010 at 08:40:15 (EDT)
For Sale (Ad #8885)
Improve the steering in your Model A by installing one of my F100 steering boxes. The box has beem modified to fit your vehicle the same way the original steering box fits. There are no alteration, drilling, etc. It bolts right in. New interior parts. Written up in most recent edition of "Model A Times". Prices vary for 1928-29 and 1930-31. For more info, please include the year of your vehicle. Pictures and "Model A Times" article available to send. E-mail me at melmodela@aol.com or call me at (714) 292-8660 or (323)728-5712.
Posted by: Mel Gross, from Montebello, CA USA
Posted on Saturday, July 31, 2010 at 07:53:00 (EDT)
For Sale (Ad #8884)
4 new cast iron brake drums - 2 fronts and 2 rears. $260.00 plus shipping. Researched and written up in "Model A Times" for their fine quality. Pictures and article available upon request. Please include your zip code when responding so that we can determine the shipping cost. E-mail me at melmodela@aol.com or call me at (714) 292-8660 or (323)728-5712 for more info.
Posted by: Mel Gross, from Montebello, CA USA
Posted on Saturday, July 31, 2010 at 07:50:18 (EDT)
For Sale (Ad #8883)
Selling all my Model A parts in basement barn and shed, Lot of misc. parts . First come will get all or first one to put money in paypal acc. Moveing will not need anymore. Bring pick up and small trailer, must be picked up at my house in Belleville Mich. $700.00 cash. Also have a Airco wire welder, 2 aircompressors ,a engine cherry picker and lots of trailer psrts like springs jacks, hangers, wagon wheels,lots more, VMoore3032@aol.com
Posted by: Charles Moore, from Belleville, Mich USA
Posted on Friday, July 30, 2010 at 13:24:23 (EDT)
Wanted (Ad #8882)
Looking to find the 1930/31 Gas Tank Steering Column Support.
The part that is/was attached to the tank.
I want to make a bracket out of it to hold a gauge.
Thanks
Posted by: Joop, from Back East, MA USA
Posted on Friday, July 30, 2010 at 08:19:14 (EDT)
Wanted (Ad #8881)
Colour brochure features 1931 Model A's including S/W Sedans. Brochure heading is "Precision - One Reason Why You Can Drive the Ford Car So Many Thousands of Miles."
Posted by: Kevin Straw, from Christchurch, Canterbury New Zealand
Posted on Thursday, July 29, 2010 at 23:46:00 (EDT)
For Sale (Ad #8879)
i have a new texas title for a 1930 model a ford with antique plates im asking $1000 or best offer call mike at 903-454-7771
Posted by: mike, from greenville, texas USA
Posted on Thursday, July 29, 2010 at 21:55:44 (EDT)
Wanted (Ad #8878)
Looking for original rumble lid handle for 29 roadster
Posted by: mrtexas, from beaumont, tx USA
Posted on Thursday, July 29, 2010 at 00:00:22 (EDT)
For Sale (Ad #8877)
This early replica car was built from an early 1900’s “piano box” buggy. The electric drive unit is from a 24 volt golf cart. The wheels are 24 inch industrial. (not bicycle) The car has 2 speeds, 3 mph and 6 mph. A switch reverses direction. Power is from 2- 12 volt batteries and the car will run for up to 5 hours on a charge. There are 2 horns, the bulb horn shown and a motorized Ahooga horn. The three lamps are “Neverout” brand as used on the 1903 curved dash Oldsmobile. The overall size is 60 inches by 85 inches and can be hauled in a shortbed S-10 pick-up .I built this in 2003 and the grandkids have already outgrown it. $1,800.00 309 637 7466 or 309 696 4695
Posted by: Rainmaker Ron, from Peoria, IL USA
Posted on Wednesday, July 28, 2010 at 15:34:03 (EDT)
For Sale (Ad #8869)
1928 MODEL-A Ford--color is black--leatherback--fordor--EXCELLENT CONDITION--looks and runs great--ZERO WRONG--drive anywhere--will email photos--this is an "extra nice car"--Bob Watson--Key West, Florida--Phone: 305 292 4821 PRICE: $12,500
Posted by: Bob Watson, from Key West, Florida USA
Posted on Monday, July 26, 2010 at 11:21:29 (EDT)
Will Swap or Trade (Ad #8866)
Would like to sell or trade, UNLESS I can find a body for it. Registered as a 33 in Cal. with both plates of that year. Has a Hopped up Model A motor coupled to a Chrysler 904 Auto Trans, thru a balanced drive line to a 48 Dodge PU rear end. Email for particulars. The body is very shbbily put together, but the Running Gear, NOW Thats a differant story. It was a Hill Climber in Cal with 6 years in a row of first place finishes. This thing is quick. thanks tom
Posted by: Tom Ryan, from Broadbent, Oregon USA
Posted on Monday, July 26, 2010 at 01:09:19 (EDT)
Will Swap or Trade (Ad #8865)
I have a spare tire lock strap for a 19" wheel, with working lock and key I would like to swap for a 21", same good condition. The lock is not attached to the strap, and came with a threaded bolt, but I fashioned an acorn nut that will work. I'd use it, but the strap is the wrong size.
Posted by: Richard Tatoyan, from Modesto, CA USA
Posted on Sunday, July 25, 2010 at 18:15:24 (EDT)
Wanted (Ad #8863)
Looking to buy a Model A Ford SPEEDSTER. It can be a unfinished, partically finished or completed project. I would prefer a Rootleib kit car but will consider all offerings. Would also be interested in buying speedster parts and literature. Please feel free to send info via email. Thanks.
Posted by: Barry Papiernik, from Norristown, PA USA
Posted on Sunday, July 25, 2010 at 10:36:11 (EDT)
For Sale (Ad #8862)
2 Original Ahooga Horns, 6 volt and 12 volt, Model A Ahooga Horns that has been beautifully restored and rewound and one converted to a 12 Volts system. Completely and correctly restored. The armatures and field coils have been rewound to like new condition. Will work on any 1928 to 1931 Ford Model A. Correctly tuned and comes complete with correct mounting brackets. Also, have other horns. Each is ready to mount and Ahooga at everyone you meet. Pictures available. Take your choice. Free shipping to your door in the lower 48. Thanks for the visit. Neil
Posted by: Neil, from The Sunny South, MS USA
Posted on Saturday, July 24, 2010 at 07:36:01 (EDT)
Wanted (Ad #8859)
One middle and one lower door hinge for a 1929 closed cab truck.
Platform bed U-bolts for a 1929 AA truck. I need one 13 3/16" and two 11 3/4" u-bolts.
Thanks
Posted by: Drew Neumann, from Mankato, MN USA
Posted on Friday, July 23, 2010 at 13:40:58 (EDT)
For Sale (Ad #8858)
Accessory 1930-31 Model A rear spare tire guard. This is the assembly that bolts in between the original bumpers and protects the spare tire.It uses the existing bumper hardware. The face bar is excellent with very good chrome. It is a complete and with all the brackets, etc. 125.00 plus 20.00 shipping anywhere in the USA. I accept PAYPAL. Thanks. 734-730-4274 or motoringicons@hotmail.com
Posted by: GZ, from Detroit, MI USA
Posted on Friday, July 23, 2010 at 11:48:30 (EDT)
Wanted (Ad #8857)
1931 Model A Ford brochure "GET THERE with Comfort and Economy"
this is a green and black print on white paper and features the 1931 models.
Posted by: Kevin Straw, from Christchurch, Canterbury New Zealand
Posted on Friday, July 23, 2010 at 03:37:10 (EDT)
For Sale (Ad #8856)
Rebuilt Tilliton Model X Carburetor. These are great carburetors for people who love to drive their As. This carburetor was an excellent original that was recently and professionally rebuilt inside and out. All new parts, castings remachined, excellent shafts, etc. Test run and ready to bolt on and use. 120.00 INCLUDES shipping anywhere in the USA. 734-730-4274 or motoringicons@hotmail.com is the best way to reach me. Thanks!
Posted by: GZ, from Detroit, MI USA
Posted on Thursday, July 22, 2010 at 20:07:07 (EDT)
For Sale (Ad #8855)
Really nice set of five 19" 1930-31 Model A wheels. These were beadblasted and given a light coat of gray primer a few years back. The lug holes are excellent, the rims nice and straight, etc. These will make a great set of wheels. Price is 150.00 for the five plus 110.00 shipping anywhere in the USA. (If it cost less, I'll cover refund the difference, if it cost more, I'll cover it!). 734-730-4274 or motoringicons@hotmail.com
Posted by: GZ, from Detroit, MI USA
Posted on Thursday, July 22, 2010 at 19:55:49 (EDT)
Wanted (Ad #8853)
Looking to find correct restored 1931 Ford Model A
Coupe, Fordor, Cabriolet, Phaeton or Pickup
Prefer later one with teardrop firewall (gas shutoff in engine compartment )
Let me know what you have and please send pictures and price to:
Ford68C@aol.com
Posted by: Joop, from Boston, MA USA
Posted on Thursday, July 22, 2010 at 08:05:00 (EDT)
For Sale (Ad #8852)
A vintage Champion Spark plug tester and cleaner. Has original blue color. Nice condition. In working condition when purchased 2 years ago. Because of size, it should be picked up.
Asking $250.
Posted by: Neil Mylar, from Lakewood, CA USA
Posted on Thursday, July 22, 2010 at 00:47:59 (EDT)
For Sale (Ad #8851)
New Aries steel muffler. Has original stickers on it. Never used. Got from Sacramento Vintage Ford for $200, plus tax and shipping. Asking $170. Please pick up in Lakewood. CA.
Posted by: Neil Mylar, from Lakewood (near Los Angeles), CA USA
Posted on Thursday, July 22, 2010 at 00:24:58 (EDT)
For Sale (Ad #8850)
1930 Model A Conversion $16,000;
1929 AA Truck $3250.00;
1931 Victoria $9950.00;
1929 Tudor Sedans(2) $2500.00-$3500.00;
1929 Leatherback Coupes (2) $2995.00-$3950.00;
1929 Roadsters (2) $9995.00-$15,900.00;
1930 Coupe $9250.00;
1930 Tudor Sedan $1250.00
1930 Murray Fordor $3000.00;
1931 Slant Window Sedans(2) $3500-$4500.00;
1929 Bug/Jokers (3) $500.00-$1700.00;
1929 Pickup Cab $1000.00;
1930 Roadster Body $5500.00;
1929 Sedan Bodies (3) $600.00-$1100.00;
1929-31 pickup Boxes (3) $350.00-$400.00;
1930 Sedan Bodies (2) $1250.00-$1500.00;
1931 Montgomery Ward Conversion $3500.00;
1931 Pickups (3), $4500.00-$7500.00;
218-839-3133 I will trade for other Model A Stuff, Pre 1966 Snowmobiles, and pre 1960 Buicks.
Posted by: Tony Rolfes, from Brainerd, MN USA
Posted on Wednesday, July 21, 2010 at 15:09:51 (EDT)
The Website is www.rufusranch.com
For Sale (Ad #8849)
For Sale
Oregon License plates. Prices on all plates listed below. Shipping is included in the lower 48 states, A little more outside the US. All plates are in fair or better condition. Please call or e-mail if you have specific questions or want pictures.
1920 pair $30.00
1922 pair $30.00 1942 pair $45.00
1947 pair $45.00 1947 pair $45.00
1948 pair $40.00
1949 pair $45.00
Please contact Brian Martin, 3215 Northridge Drive, San Antonio TX 78209, (210) 824-8441, or respond to this ad.
Posted by: Brian SATX, from San Antonio, TX USA
Posted on Wednesday, July 21, 2010 at 14:24:24 (EDT)
For Sale (Ad #8848)
have a 79B panel delivery needing complete restoration. It is 95% complete needing only front and rear fenders, steering column, hood, cowl with tank, windshield all of these common to this year vehicle. The only parts unique to this which I do not have are the rear door hinges and locking mechanism, rain gutters, inside tool bin and the 2 strips of molding that go between the rear corner and side panels. It is sitting on a running complete chassis. I will crank her up for you! I have my spare wheels and tires on it so you would also need these.
This would make a great project for the comming cold weather outside.
I can email pictures upon request. $6500. It is located in Cumming, Ga and would need to be picked up here.
Don Mims 770-887-8971 or email at donsan5502@att.net
Posted by: Don Mims, from Cumming, Ga USA
Posted on Wednesday, July 21, 2010 at 11:09:58 (EDT)
Wanted (Ad #8847)
Wanted 1930-31 Model A Roadster Truck roof irons, any orginal condition will do.
Thanks
Rich Hardman
Calgary Alberta Canada
Home 403-256-3192
Work 403-290-6290
Posted by: Rich Hardman, from Calgary, AB Canada
Posted on Tuesday, July 20, 2010 at 21:43:17 (EDT)
For Sale (Ad #8846)
1930/31 front fenders, new reproductions, primed. $700.00 pair
1930/31 rear fenders coupe, new reproductions primed coupe, roadster or pickup $400.00 pair
1930 running boards/aprons & nose pieces new reproductions primed $275.00 pair
1931 splash aprons new reproductions $100.00
903-360-7116 prefer local pickup but will ship via Greyhound.
Posted by: Dick Sparks, from Tyler, TX USA
Posted on Tuesday, July 20, 2010 at 21:22:40 (EDT)
Wanted (Ad #8845)
Looking for a Victory accessory oil pressure gauge and housing as found in the Unauthorized Accessories for Model A Ford book. Must be good condition and the choke extension does not need to be present.
Posted by: Eric, from Glendale, CA USA
Posted on Tuesday, July 20, 2010 at 18:45:20 (EDT)
For Sale (Ad #8844)
30-1 AA doodlebug 4spd.w/overunder box behind trans. good 20' TIRES,runs good has closed car cowl $900.28-9 open car filler between w/s &gas tank w/ws stanchion stubs $90. Thank U.
Posted by: Brian, from Trumansburg, N.Y. USA
Posted on Tuesday, July 20, 2010 at 17:16:58 (EDT)
Wanted (Ad #8843)
I am looking to buy a Model A Ford Speedster. It can be a unassembled kit, a partial or completed project. Pictures and prices by email please. Thank you.
Posted by: Barry, from Norristown, PA USA
Posted on Tuesday, July 20, 2010 at 14:17:44 (EDT)
Wanted (Ad #8842)
Need 28/29 Radiator and Shell AA or Car
Have AA 30/31 HD Radiator and shell in Good Condition
Looking to trade or buy if price is right.
Thanks
Posted by: sunny, from tehachapi, ca USA
Posted on Monday, July 19, 2010 at 17:59:57 (EDT)
For Sale (Ad #8841)
Five really nice 19" 1930-31 wheels. They were lightly sandblasted and given a light coat of primer a few years back. The lug holes are excellent, the rims are very nice and the are straight. No rust or pitting. These will make a nice set of wheels. 225.00 for the five plus 125.00 shipping ANYWHERE in the USA. 734-730-4274 or motoringicons@hotmail.com
Posted by: GZ, from Detroit, MI USA
Posted on Monday, July 19, 2010 at 09:04:44 (EDT)
Wanted (Ad #8840)
Looking for a reasonable priced Model A driver.Would like it to be located within 250 miles of Taunton Ma.Do not need a show car.
Thanks
ED 508-942-8094
Posted by: Edward G Ross, from Taunton, Ma USA
Posted on Sunday, July 18, 2010 at 16:36:28 (EDT)
Wanted (Ad #8839)
Need gas pedal linkage usable with good spring. This is the part that attaches to the back of the motor.
Posted by: phil sauber, from beaumotn, tx USA
Posted on Sunday, July 18, 2010 at 12:05:57 (EDT)
Wanted (Ad #8838)
WTB.WTB.WTB. piloted valve guide style reamer---------11/32 (.343) pilot and 3/8(.375) ream. usually has 5/16 or 1/4 square hex on top side for tap handle or to fit into gear reduction unit. k-line use to supply and was used to ream guides to install bronze thin wall liners in valve guides. have tried several suPPly houses w/o success. richard 608 225 3278. thank you
Posted by: richard, from msn, wi USA
Posted on Saturday, July 17, 2010 at 17:47:46 (EDT)
For Sale (Ad #8835)
1928 ford modelA 2drsedan as is parts or whole,will trade.sask title,notrunning but ok for restoration.clean body.rolling car,5000.obo,604 504 0738.mikepsheeran@yahoo.ca
Posted by: mike sheeran, from abbotsford, british colombia canada
Posted on Friday, July 16, 2010 at 20:50:34 (EDT)
Will Swap or Trade (Ad #8833)
will trade 1928 ford leatherback 4dr
it runs and drivers good. for a roadstr same ahape
call eve 218-7526611 OLE
Posted by: ole olson, from swen river , mn USA
Posted on Friday, July 16, 2010 at 19:57:07 (EDT)
For Sale (Ad #8832)
6 Volt Optima Red Top Battery - Ideal for the touring Model A! Zero maintnance, 800 cold cranking amps (CCA) for extra year round starting power, plus extra long life. Install under your floorboard and forget it! This is a NEW battry, never used, shipped to me by Optima factory (factory warrenty replacement) too late for my club tour. I already prchased replacement. Still in shipping box from Optima! $100.00
Jim Gregory
(301)776-5885 call with questions or for info!
Posted by: James Gregory, from Laurel, Maryland USA
Posted on Friday, July 16, 2010 at 16:11:13 (EDT)
For Sale (Ad #8831)
Ford Emblem Kit - Highly reflective vintage ford emblem with magnetic backing (~6 X 10 inches) with two magnetic backed red reflectors for your bumpers (1.5 X 2 inches). Accents the look of your Model A or T and greatly enhances the safety of your vehicle. Night time visibility for on coming vehicles is up to one mile away. "BE SEEN, BE SAFE" Hi-energy magnetic backing lets you place emblems on and off as you wish - have tested up to 65mph. Made in the USA and ships same day. Order from our website http://visiblevintageautos.com or mail in to: Visible Vintage Autos, 146 Old Mill Road, Avon, CT 06001 Free shipping and handling (continental US) and magnetic backed FREE reflective flag (3X5.75 inch)during the month of July.
Posted by: Steve, from Avon, CT USA
Posted on Thursday, July 15, 2010 at 20:08:52 (EDT)
For Sale (Ad #8830)
FOR SALE.... Very nice 1928 OK plate I bought this plate in Enid, OK for my Dad approx 12 yrs ago for his Roadster
"A "collection. I now own the Roadster and have North dakota YOM plates so no longer need this one and hope someone could use it. Have a gre"A" day! Any questions, please call me @ (701) 240-4937.
Dave
Posted by: Dave Cline, from Minot, ND USA
Posted on Wednesday, July 14, 2010 at 14:58:48 (EDT)
Wanted (Ad #8828)
Wanted original type black folding trunk rack to fit 1930 Model A. I know new ones are available, but there is just something about an original.
Wanted dust/car cover for tudor sedan.
Posted by: Eddy, from Chehalis, WA USA
Posted on Wednesday, July 14, 2010 at 14:10:34 (EDT)
For Sale (Ad #8827)
One of the first Model A Fords made in 28 .it was made the second month of 1928 and is called the AR . New Radiator, New Starter, New Carburetor, all Radiator Hoses replaces, New Spark Plugs, Rebuild Dis. New Gas Line and New Leak less water pump with new fan and new fan Belt. I hate to sell but my wife needs my time more . I really only want someone who wants to finish her up and not make a hot rod out of her. Double click a picture to see full size. And thank you for looking. Need to move this care so price is lowered to $8500.00 to first person that calls. I can send pictures if someone is interested.
Thanks,
Jerry.......904-637-9186
Posted by: Jerry Gentile, from Jacksonville, Florida USA
Posted on Tuesday, July 13, 2010 at 22:21:24 (EDT)
For Sale (Ad #8826)
6V Optima Batery, NEW (gel cell mounts in any position and won't leak ever - zero maintenance)! Warrenty replacement that came too late for my tour. Never used, origingl box. 1,000 cranking amps, 800 cold cranking amps. $110.00
Laurel, MD
Posted by: James Gregory, from Laurel, Maryland USA
Posted on Tuesday, July 13, 2010 at 15:55:48 (EDT)
For Sale (Ad #8825)
Back in the early 80's FORD dealers were offering light weight clam shell trailers and at the Seven Springs National, any number of Model A's arrived towing these trailers. Listed at about $1200 back then, this one still carried current registration, but has only been tucked less than $1200 miles since new. Offered at $500.00 Pictures available via eMail.
Posted by: Swampy, from Mertztown, PA USA
Posted on Sunday, July 11, 2010 at 19:31:08 (EDT)
Wanted (Ad #8824)
I need a passenger side door latch for a 1928 open car or truck.
Anybody from England need not reply.
Posted by: Chris, from North Hills, CA USA
Posted on Sunday, July 11, 2010 at 15:08:05 (EDT)
For Sale (Ad #8823)
Original Ahooga Horns, 6 volt and 12 volt, Model A Ahooga Horns that has been beautifully restored and rewound and one converted to a 12 Volts system. Completely and correctly restored. The armatures and field coils have been rewound to like new condition. Will work on any 1928 to 1931 Ford Model A. Correctly tuned and comes complete with correct mounting brackets. Also, have other horns. Each is ready to mount and Ahooga at everyone you meet. Pictures available. Take your choice. Free shipping to your door in the lower 48. Thanks for the visit. Neil
Posted by: Neil, from The Sunny South, MS USA
Posted on Sunday, July 11, 2010 at 14:45:53 (EDT)
For Sale (Ad #8822)
1929 Ford Model A
4door, runs smooth, Briggs body, new upholstery, like new roof, good tires
$9,000
Please email inquiries.
More Pictures here!
Posted by: John Durr, from Battle Ground, WA USA
Posted on Sunday, July 11, 2010 at 01:50:38 (EDT)
For Sale (Ad #8788)
KOOL-FEET The original Insulated Muffler Shield as featured on the Aries Muffler web site.
77 degrees of heat reduction. All heavy duty construction. $79.95 (310)275-3836
Leslie Pam, Los angeles, CA USA Posted on Tuesday, June 22, 2010 at 18:45:31 (CDT)
|  |
- That's All -
 |
Last revised Thursday, 02-Sep-2010 22:31:50 EDT.
|
© 1996-2010, Ahooga.Com
|
