I think we see the problem

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Jim on Mar. 11, 2010 at 14:57:10

In Reply to: thanks Tom
posted by kwink smithville mo on Mar. 11, 2010 at 07:39:39

Don't pry or push on the valves, you'll only risk bending, scoring or otherwise damaging them! Seafoam, Kroil, and WD-40 will not solve your issue. You need the ream the guides, a drill bit is not a reamer! It sounds like your issue is clearance. When things get hot, they expand, and a valve stem and guide will expand into each other. This is why it works cold and not when hot. Take the head off, pull the valves and ream them to spec!

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups:

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam