If you have .001-.002 on the intake

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Tom Wesenberg on Mar. 11, 2010 at 12:01:08

In Reply to: thanks Tom
posted by kwink smithville mo on Mar. 11, 2010 at 07:39:39

and .002-.003 for the exhaust you should be OK. Were the guides cleaned well before installing the valves? Were the valve stems lubed well before installing? I can only guess the exhaust clearance is too tight. I've seen this same thing at a national meet a few years ago.

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups: Re: If you have .001-.002 on the intake Mike V. Florida Mar. 11, 2010 at 16:37:18 (0)

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam