thanks Tom

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by kwink smithville mo on Mar. 11, 2010 at 07:39:39

In Reply to: Try pushing the valve down using
posted by Tom Wesenberg on Mar. 10, 2010 at 23:20:32

Kind of strange how this occured. when engine was cold things worked ok as the engine heated up. 160deg the problems started whild driving down the road at 45 mph. the last time it cleared it self. havent checked it this morning. will pickup some seafome and follow directions. used a brass drift to drive the new modern valve guides in to the block still mushroomed the top of it. ran a drill to open it back up. the new valves fit in ok did not seam to hang when cold. guess i need to ream each of the valve guides. any other ideas please and thank you

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups: valves kwink smithville mo Mar. 11, 2010 at 19:57:42 (3) Take your valve to a local machine shop Tom Wesenberg Mar. 11, 2010 at 20:49:23 (2) Re: Take your valve to a local machine shop kwink smithville mo Mar. 12, 2010 at 09:20:54 (1) Be sure to use paper towels or rags Tom Wesenberg Mar. 12, 2010 at 18:59:03 (0) I think we see the problem Jim Mar. 11, 2010 at 14:57:10 (0) If you have .001-.002 on the intake Tom Wesenberg Mar. 11, 2010 at 12:01:08 (1) Re: If you have .001-.002 on the intake Mike V. Florida Mar. 11, 2010 at 16:37:18 (0)

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam