Re: New owner engine questions

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Chuck Sea/Tac on Feb. 08, 2010 at 23:15:56

In Reply to: New owner engine questions
posted by Bob on Feb. 03, 2010 at 22:29:42

You need to check the fit of the pilot bearing, on the trans. imput shaft. If the shaft is worn, you can pull it in a couple of minutes (with the trans out), and have it turned down to 5/8". You can by a 6202,with a 5/8ths bore at your local bearing supply house. Chuck

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups:

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2007, Ahooga.Com

Anti Spam