Re: mounting pu bed onto the fram

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Rowdy on Feb. 05, 2010 at 02:15:00

In Reply to: mounting pu bed onto the fram
posted by Greg Semanoff on Feb. 04, 2010 at 19:39:21

No detailed drawings but put down the frame welting and attach the running board aprons, then the body blocks which are notched to clear bolt heads and rivits. Don't forget the rubber pads and the frame welting should end at the rear of the splash apron. If this is just for mock up for body work you can ommit all but the blocks and the bed. Rod

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups: Re: mounting pu bed onto the fram 31rpu Feb. 05, 2010 at 20:10:16 (0)

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam