Re: On Snyder's web site...

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by keith true on Jul. 07, 2009 at 17:42:32

In Reply to: Re: On Snyder's web site...
posted by Jack Dernorsek on Jul. 02, 2009 at 18:09:30

You don't do this on the engine.You hold the pulley in one hand with the pump hanging down and smack the end of the tool with a 3 pound hammer.Hold it over something that the pump can fall on without hurting it.I have an old head nut welded to an old head stud that I use.If you do this on the engine you are smacking the water pump shaft on the boss in the head.Not good,you could crack something.

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups:

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam