Don't hold the blade, just grab the hub

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Tom Wesenberg, Mn. on Jul. 03, 2009 at 13:09:24

In Reply to: Re: On Snyder's web site...
posted by Jack Dernorsek on Jul. 02, 2009 at 18:09:30

to hold the fan. A good rap with a hammer on the tool should knock the fan loose from the shaft. A nut screwed half way on, then a bolt screwed into the nut also makes a good knocker tool.

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups:

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2010, Ahooga.Com

Anti Spam