Re: On Snyder's web site...

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Jim on Jul. 02, 2009 at 19:40:41

In Reply to: Re: On Snyder's web site...
posted by Jack Dernorsek on Jul. 02, 2009 at 18:09:30

This is a very common way to break items loose from a tapered shaft. Often pieces of hard wood, brass drifts, etc. will work. Kinda like the rear drum puller. Screw the tool onto the shaft and hit with a hammer. The jarring of the shaft will break it loose. It works very well and doesn't damage anything on the part.

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups: Re: On Snyder's web site... Leo S Jul. 07, 2009 at 07:49:28 (1) Re: On Snyder's web site... RayinLaMesa Jul. 07, 2009 at 09:36:02 (0) "flywheel knocker" Gary Stewart Jul. 02, 2009 at 22:25:01 (1) Re: "flywheel knocker" Tim Stephens Jul. 02, 2009 at 23:25:33 (0)

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2007, Ahooga.Com

Anti Spam