Re: Set timing with electronic ignition

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Posted by Herb Neumann Concord CA on Jun. 30, 2009 at 17:34:22

In Reply to: Re: Set timing with electronic ignition
posted by jasonious on Jun. 30, 2009 at 16:52:46

Hi, I have a first street electronic ignition in my pick up. To time the car do as Bill L. says using timming pin find TDC. Then remove the dist cap but leaving the body in place. With the spark rod fully retarded, the right side of the rotor contact should be by the post in the dist body that fires #1 plug. If not, you will have to remove the rotor and loosen the cam screw to rotate the cam to acheive the above condition. When you acheive this, you car wiil be timed so that the #1 plug will fire at TDC. Regards, herb

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

Follow Ups:

Post a Follow Up Message:

Your Name:      (Required)

Your E-Mail Address:      (Required)

Remember your Name and E-mail Address?

Subject of your Comment:       (Required)

Enter Your Message Below:      (Required)

Web Site Link URL    (Your homepage maybe!!!)
(must end in "/" or ".htm" or ".html" or ".shtml")

The above Links Title:

If you have a picture place image URL here:
(must end in ".gif" or ".jpg" with no spaces)

Read Follow Ups Post Follow Up Model-A Ford Message Board FAQ

Previous PageE-Mail Comment to WebmasterPost New MessagePrint MessageClose Window

© 1996-2007, Ahooga.Com

Anti Spam