"Ford Model-A" Message Board
Archive 13

Messages from Sep. 2nd, 1998 to Sep. 24th, 1998

Archived Messages:

rebuilding a rear end need help - Larry Sep. 24, 1998 at 22:34:48 (3)
- Re: rebuilding a rear end need help - Marco Sep. 26, 1998 at 22:33:19 (0)
- Re: rebuilding a rear end need help - Jim Sep. 26, 1998 at 21:54:02 (1)
  - THANKYOU - Larry Sep. 27, 1998 at 15:22:15 (0)
Want a 28-9 A coupe Body - Cut Schreiner Sep. 24, 1998 at 21:56:20 (0)
REAR END GEARS - BILL Sep. 24, 1998 at 18:22:23 (0)
Step on the gas... And it goes! - John Dauphiny Sep. 24, 1998 at 17:17:32 (1)
- Re: Step on the gas... And it goes! - Kevin Daly Sep. 25, 1998 at 06:58:44 (0)
welded ball studs on spindle arms - Michael D Sep. 24, 1998 at 15:05:50 (4)
- Re: welded ball studs on spindle arms - Bill Sep. 24, 1998 at 20:48:26 Embeded - (LINK) (0)
- Re: welded ball studs on spindle arms - Bob Carabbio Sep. 24, 1998 at 17:02:59 (2)
  - Re: welded ball studs on spindle arms - John Icenhower Sep. 24, 1998 at 17:12:08 (1)
    - Re: welded ball studs on spindle arms - eric Johnson Sep. 28, 1998 at 22:17:18 (0)
Brake Shoe Centering Measurements - Kevin Daly Sep. 24, 1998 at 14:46:20 (3)
- Re: Brake Shoe Centering Measurements - Marco Sep. 25, 1998 at 10:37:06 (0)
- Re: Brake Shoe Centering Measurements - DJ.Voyce Sep. 25, 1998 at 03:20:51 (1)
  - Thank You DJ! - Kevin Daly Sep. 25, 1998 at 06:46:26 (0)
FOR SALE: Unrestored 1928 PHAETON - Neil Mylar, Southern California Sep. 24, 1998 at 13:37:49 (1)
- Car has been sold - Neil Mylar Oct. 05, 1998 at 14:38:20 (0)
Engine removal - Andy Sep. 24, 1998 at 12:48:34 (2)
- Re: Engine removal - John Icenhower Sep. 24, 1998 at 17:01:41 (0)
- Re: Engine removal - Fred Engelman Sep. 24, 1998 at 13:58:08 (0)
Spark Plugs - Jim Miller Sep. 24, 1998 at 12:23:01 (6)
- Re: Spark Plugs - Ben Jenkinson Sep. 25, 1998 at 17:47:45 (2)
  - Re: Spark Plugs - Jim Miller Sep. 28, 1998 at 10:18:33 (1)
    - Re: Spark Plugs - ben jenkinson Sep. 30, 1998 at 19:17:42 (0)
- Re: Spark Plugs - Gordon Biggar Sep. 24, 1998 at 22:56:09 (1)
  - Re: Spark Plugs - DJ.Voyce Sep. 25, 1998 at 03:27:53 (0)
- Re: Spark Plugs -- Thanks! - H. L. Chauvin Sep. 24, 1998 at 20:33:40 (0)
Buying Wheels. - Baltasar Cavazos Chena. Sep. 24, 1998 at 12:12:58 (0)
Any users from south africa - Brian Noik- South Africa Sep. 24, 1998 at 12:02:26 (0)
Clutch noise - Dan Sep. 24, 1998 at 12:00:07 (1)
- Re: Clutch noise - Bill Sep. 24, 1998 at 12:27:14 (0)
Diff hints- replaycing the rear end - Brian Noik- South Africa Sep. 24, 1998 at 11:59:14 (1)
- Re: Diff hints- replaycing the rear end - Dave Sturges Sep. 24, 1998 at 12:26:01 (0)
early rear bumper question - Bill Sep. 24, 1998 at 08:21:56 Embeded - (LINK) (3)
- Re: early rear bumper question - David Dewey Sep. 25, 1998 at 10:45:10 (1)
  - Re: early rear bumper question - Bill Sep. 25, 1998 at 12:00:45 (0)
- Re: early rear bumper question - David Sep. 25, 1998 at 10:40:29 (0)
Early '28 Rear Brake Grease Baffles - Ken McGuire Sep. 24, 1998 at 08:12:40 (0)
windshield frame brackets - Dan Sep. 24, 1998 at 05:51:35 (0)
Top Prop Knobs(Nuts) for 1928 Phaeton - Bob McDonald Sep. 24, 1998 at 05:27:03 (4)
- Re: Top Prop Knobs(Nuts) for 1928 Phaeton - Marco Sep. 24, 1998 at 09:18:19 (3)
  - Re: Locking clips - correction - Marco Sep. 24, 1998 at 12:04:36 (2)
    - Re: Locking clips - correction - Bob McDonald Sep. 27, 1998 at 03:03:28 (0)
    - Re: Locking clips - correction - Bob McDonald Sep. 27, 1998 at 02:50:21 (0)
31 model a coupe Front Fenders - Jerry Bryant Sep. 24, 1998 at 00:56:40 (2)
- Re: 31 model a coupe Front Fenders - Fred Sep. 24, 1998 at 14:13:44 (1)
  - Re: 31 model a coupe Front Fenders - Mike Sep. 24, 1998 at 19:48:36 (0)
@#$%&@*&^ condensors!!!!! - Steve Watrous Sep. 23, 1998 at 21:30:54 (6)
- Re: @#$%&@*&^ condensors!!!!! - Steve Watrous Sep. 26, 1998 at 08:49:14 (0)
- Re: @#$%&@*&^ condensors!!!!! - Ray C Sep. 25, 1998 at 08:54:35 (0)
- Re: @#$%&@*&^ condensors!!!!! - John Regan Sep. 24, 1998 at 23:09:33 Embeded - (LINK) (0)
- Re: @#$%&@*&^ condensors!!!!! - Ray C Sep. 24, 1998 at 07:56:47 (0)
- Re: @#$%&@*&^ condensors!!!!! - Carla Sep. 23, 1998 at 21:53:33 (1)
  - Re: @#$%&@*&^ condensors!!!!! - Steve Watrous Sep. 24, 1998 at 21:23:43 (0)
Huckster plans - Bill Sep. 23, 1998 at 20:48:35 Embeded - (LINK) (2)
- Re: Huckster plans - MRR Sep. 24, 1998 at 09:24:33 (1)
  - Re: Huckster plans - Bill Sep. 25, 1998 at 12:02:26 (0)
Early Ford V8 Forum - Patrick Patterson Sep. 23, 1998 at 19:47:03 Embeded - (LINK) (0)
FOR SALE Late 1931 S/W - Craig Sep. 23, 1998 at 19:23:11 (0)
Frame number location - George Sep. 23, 1998 at 17:33:27 (2)
- Re: Frame number location - Harold Sep. 23, 1998 at 19:50:11 (0)
- Re: Frame number location - Dennis Smith Sep. 23, 1998 at 17:47:31 (0)
NEED SUGGESTIONS ON REMOVING PINION From 1932 DRIVESHAFT. - Neil Mylar Sep. 23, 1998 at 16:30:11 (2)
- Re: NEED SUGGESTIONS ON REMOVING PINION From 1932 DRIVESHAFT. - Bob Carabbio Sep. 23, 1998 at 20:36:39 (1)
  - Is it a 32 B or V8?. - Vince Falter Sep. 25, 1998 at 17:39:48 (0)
1930 Delus Rumbleseat Coupe For Sale - Neil MacGregor Sep. 23, 1998 at 15:23:27 (0)
Karri-Keen Trunk - geo. shebley Sep. 23, 1998 at 12:32:40 (0)
A Positive Note - Jim Miller Sep. 23, 1998 at 11:46:31 (1)
- Re: A Positive Note - Kevin Daly Sep. 23, 1998 at 14:23:04 (0)
Primer - Dale Beckman Sep. 23, 1998 at 11:22:34 (5)
- Re: Primer/painting - David Dewey Sep. 23, 1998 at 23:37:34 (0)
- Re: Primer - Marco Sep. 23, 1998 at 13:43:09 (0)
- Re: Primer times between coats - Ken Wieewiora Sep. 23, 1998 at 12:23:13 (0)
- Re: Primer solutions - Ken Wiewiora Sep. 23, 1998 at 12:13:07 (1)
  - Re: Primer solutions - doug handran Sep. 23, 1998 at 23:05:42 (0)
Vin number identifaction Help!!!! - Ken Wiewiora Sep. 23, 1998 at 09:47:07 (3)
- Re: Vin number identifaction Help!!!! - Dave Sturges Sep. 25, 1998 at 10:49:08 (0)
- Re: Vin number identifaction Help!!!! - George Konton Sep. 23, 1998 at 17:20:32 (1)
  - Re: Vin number identifaction Help!!!! - George Sep. 23, 1998 at 17:27:06 (0)
1931 Pick-Up For Sale - Bill Kelly Sep. 23, 1998 at 08:53:21 (0)
Gas fouled in #1 only - Rick B Sep. 23, 1998 at 08:40:26 (6)
- Re: Gas fouled in #1 only - Dale Beckman Sep. 23, 1998 at 23:45:09 (0)
- Fouled again?! - Glen Weilbaker Sep. 23, 1998 at 10:22:31 (2)
  - Re: Fouled again? Another Possibility - Joe Sep. 23, 1998 at 12:36:24 (1)
    - Re: Fouled again? Another Possibility -- yet another - Carla Sep. 23, 1998 at 12:59:43 (0)
- Re: Gas fouled in #1 only - Kevin Daly Sep. 23, 1998 at 09:17:55 (0)
- Re: Gas fouled in #1 only - Fred Engelman Sep. 23, 1998 at 09:15:30 (0)
Double Clutching!, Who needs it? - Kevin Daly Sep. 23, 1998 at 07:32:02 (3)
- Re: Double Clutching!, Who needs it? - Marco Sep. 23, 1998 at 09:58:26 (1)
  - Re: Double Clutching!, Who needs it? - Carla Sep. 23, 1998 at 13:16:56 (0)
- Re: Double Clutching!, Who needs it? - Jack Metcalf Sep. 23, 1998 at 08:31:41 (0)
engine misses at high rpm - Gil Sep. 22, 1998 at 21:32:22 (1)
- Re: engine misses at high rpm - alex Sep. 23, 1998 at 21:27:15 (0)
Fly wheel housing cracks - Benny Sep. 22, 1998 at 12:51:55 (6)
- Re: Fly wheel housing cracks - rick Sep. 22, 1998 at 22:19:57 (0)
- Re: Fly wheel housing cracks - David Dewey Sep. 22, 1998 at 21:55:20 (0)
- Re: Fly wheel housing cracks - Gordon Biggar Sep. 22, 1998 at 19:46:57 (1)
  - Re: Fly wheel housing cracks - Carla Sep. 22, 1998 at 21:37:53 (0)
- Re: Fly wheel housing cracks - Greg Hitt Sep. 22, 1998 at 18:27:41 (0)
- Re: Fly wheel housing cracks - Burt Becker Sep. 22, 1998 at 16:24:09 (0)
More on Motor Oil - Long - Bobby Crumpley Sep. 22, 1998 at 10:48:49 (10)
- Synthetic Oil and other comments - Joe Sep. 23, 1998 at 08:05:41 (0)
- Re: More on Motor Oil - Long - Gary MacRunnel Sep. 22, 1998 at 23:24:05 (2)
  - Re: More on Motor Oil - Long - Tom Jackson Sep. 23, 1998 at 11:37:05 (1)
    - Re: More on Motor Oil - Long - Gary MacRunnel Sep. 23, 1998 at 23:37:36 (0)
- Re: More on Motor Oil - Long - Gordon Biggar Sep. 22, 1998 at 20:01:23 (2)
  - Re: More on Motor Oil - Long - Bobby Crumpley Sep. 23, 1998 at 07:00:26 (0)
  - Re: More on Motor Oil - Long - Fred Sep. 22, 1998 at 22:19:22 (0)
- Thanks, interesting! - David Dewey Sep. 22, 1998 at 15:29:26 (2)
  - Re: Thanks, interesting! - Bobby Crumpley Sep. 22, 1998 at 16:53:47 (1)
    - Re: OH! - david Dewey Sep. 22, 1998 at 21:59:45 (0)
Floormats for 82A CC pickup inquiry - Joe Sep. 22, 1998 at 10:21:15 (1)
- Re: Floormats for 82A CC pickup inquiry - Ken Smith Sep. 23, 1998 at 03:24:55 (0)
alternator draws current - Jim Miller Sep. 22, 1998 at 09:48:20 (3)
- Re: alternator draws current - Bill Sep. 22, 1998 at 19:16:41 Embeded - (LINK) (0)
- Re: alternator draws current - DJ.Voyce Sep. 22, 1998 at 11:56:52 (0)
- Re: alternator draws current - Doug Linden Sep. 22, 1998 at 11:52:52 (0)
Just for the fun of it-When I Retire! - Fred Murphy Sep. 22, 1998 at 09:33:58 (2)
- Re: Just for the fun of it-When I Retire! - Wade Sep. 22, 1998 at 15:52:21 (1)
  - Re: Just for the fun of it-When I Retire! - Greg Hitt Sep. 22, 1998 at 18:11:31 (0)
1930 for sale - Newt Sep. 21, 1998 at 21:34:07 (0)
WTB-PARTS 28 Model-A Tudor Sedan - Rick Phillips Sep. 21, 1998 at 20:05:25 (3)
- Re: WTB-PARTS 28 Model-A Tudor Sedan - Dave Sturges Sep. 23, 1998 at 13:29:46 (0)
- Re: WTB-PARTS 28 Model-A Tudor Sedan - Ray C Sep. 22, 1998 at 15:50:37 (0)
- Re: WTB-PARTS 28 Model-A Tudor Sedan - Bill Sep. 21, 1998 at 21:49:28 Embeded - (PIC) (LINK) (0)
WTB-PARTS 28 MODEL-A TUDOR SEDAN - Rick Phillips Sep. 21, 1998 at 19:58:21 (0)
Rubbing out enamel paint - Dan Sep. 21, 1998 at 18:31:55 (1)
- Re: Rubbing out enamel paint - Bill U. Sep. 21, 1998 at 19:06:38 (0)
MODEL A PARTS FOR SALE - Neil Mylar, Southern California Sep. 21, 1998 at 17:04:09 (0)
Bent wheel...any cures? - Joel Rapose Sep. 21, 1998 at 15:17:53 (1)
- Re: Bent wheel...any cures? - John Dauphiny Sep. 22, 1998 at 17:13:58 (0)
Parts, Parts & More Parts for sale - Ken Wiewiora Sep. 21, 1998 at 15:15:34 (3)
- Re: Parts, Parts & More Parts for sale - jim Sep. 23, 1998 at 07:13:09 (0)
- Re: Parts, Parts & More Parts for sale - jim Sep. 22, 1998 at 07:50:26 (1)
  - brake parts - Ken Wiewiora Sep. 23, 1998 at 13:19:00 (0)
Nickel plating on the closed cars windhield slide arms - Ken Smith Sep. 21, 1998 at 14:38:43 (1)
- Re: Nickel plating on the closed cars windhield slide arms - Marco Sep. 21, 1998 at 15:04:21 (0)
Briggs Fordor Wood Install HELP!!! - Richard Inzana Sep. 21, 1998 at 13:57:31 (8)
- Re: Briggs Fordor Wood Install HELP!!! - Marco Sep. 22, 1998 at 20:56:14 (4)
  - Re: Briggs Fordor Wood Install HELP!!! - Richard Inzana Sep. 23, 1998 at 18:19:32 (3)
    - Re: Briggs Fordor Wood Install HELP!!! - Marco Sep. 24, 1998 at 00:18:22 (1)
      - Re: Briggs Fordor Wood Install HELP!!! - John Icenhower Sep. 24, 1998 at 09:03:57 (0)
    - Re: Briggs Fordor Wood Install HELP!!! - David Dewey Sep. 23, 1998 at 23:42:40 (0)
- Re: Briggs Fordor Wood Install HELP!!! - David Dewey Sep. 21, 1998 at 16:21:21 (2)
  - Re: Briggs Fordor Wood Install HELP!!! - Richard Inzana Sep. 22, 1998 at 14:13:19 (1)
    - Re: HELP on its way - David Dewey Sep. 22, 1998 at 15:21:41 (0)
Engine Problems - Jeff Sep. 21, 1998 at 11:26:58 (3)
- Re: Engine Problems - Carla Sep. 21, 1998 at 15:07:10 (2)
  - Re: Engine Problems - Jeff Sep. 21, 1998 at 16:29:15 (1)
    - Re: Engine Problems - Jeff Sep. 22, 1998 at 10:17:12 (0)
Engine Problems - Jeff Sep. 21, 1998 at 11:19:26 (0)
Voltage Regulator or Cut Out? That is the question - Curt Sep. 21, 1998 at 11:18:13 (1)
- Re: Voltage Regulator or Cut Out? That is the question - Jack Metcalf Sep. 22, 1998 at 06:48:39 (0)
Distributor Woes - Anthony Gal Sep. 21, 1998 at 10:59:39 (2)
- Re: Distributor Woes - Carla Sep. 21, 1998 at 14:44:10 (0)
- Re: Distributor Woes - Kevin Daly Sep. 21, 1998 at 11:52:23 (0)
speedo gear cap - Michael D Sep. 21, 1998 at 09:51:17 (2)
- Re: speedo gear cap - Newt Sep. 21, 1998 at 21:03:07 (0)
- Re: speedo gear cap - Vince Sep. 21, 1998 at 20:35:12 (0)
Body Wood Patterns - Fred Sep. 21, 1998 at 09:04:21 (0)
1929 tailights - Dan Sep. 21, 1998 at 07:52:46 (4)
- Re: 1929 tailights - Marco Sep. 21, 1998 at 11:35:10 (2)
  - Re: 1929 tailights - Dan Sep. 21, 1998 at 11:44:46 (1)
    - Re: 1929 tailights - Marco Sep. 21, 1998 at 12:32:57 (0)
- Re: 1929 tailights - Bob Johnson Sep. 21, 1998 at 09:36:24 (0)
Hydraulic Brake Conversion - Bobby Crumpley Sep. 21, 1998 at 07:33:46 (5)
- Re: Hydraulic Brake Conversion - Steve Watrous Sep. 21, 1998 at 16:49:52 (1)
  - Re: Hydraulic Brake Conversion - Bobby Crumpley Sep. 21, 1998 at 17:28:28 (0)
- Re: Hydraulic Brake Conversion - Larry Jenkins Sep. 21, 1998 at 14:23:59 (2)
  - Model A Trader Magazine? - Paul Reasenberg Sep. 21, 1998 at 16:51:12 (1)
    - Re: Model A Trader Magazine? - Larry Jenkins Sep. 21, 1998 at 19:10:24 (0)
Front Axle Markings - Roger Dean Sep. 21, 1998 at 07:01:56 (1)
- Re: Front Axle Markings - Fred Engelman Sep. 21, 1998 at 13:20:49 (0)
Modern crankshaft seal for Model B - Bevan Sep. 21, 1998 at 01:09:41 (1)
- Re: Modern crankshaft seal for Model B - DJ.Voyce Sep. 21, 1998 at 11:21:25 Embeded - (LINK) (0)
Blew up the generator.... - J.R. Aiello Sep. 20, 1998 at 21:54:03 (2)
- Re: Blew up the generator.... - Ray C Sep. 21, 1998 at 20:41:24 (0)
- Re: Blew up the generator.... - John Regan Sep. 21, 1998 at 10:35:53 Embeded - (LINK) (0)
Ford 1934 Pick-up truck-need sheet metal - Mark Sep. 20, 1998 at 21:20:16 (1)
- Try Mack Products Ford 1934 Pick-up truck-need sheet metal - Bill Hurlin Sep. 21, 1998 at 05:59:58 Embeded - (PIC) (LINK) (0)
Radiator - Turn on Vs. Screw on rad cap / rad neck - Roger Morrow Sep. 20, 1998 at 21:11:39 (1)
- Re: Radiator - Turn on Vs. Screw on rad cap / rad neck - Bill Sep. 21, 1998 at 06:34:10 Embeded - (LINK) (0)
How can I get a leagle title for a Model A Chassis - Tim Gross Sep. 20, 1998 at 20:08:32 (4)
- Re: How can I get a leagle title for a Model A Chassis - John uhrin Sep. 21, 1998 at 11:24:15 (1)
  - Re: Thats about what I hear... - Bruce Wheeler Sep. 22, 1998 at 06:15:52 (0)
- Re: How can I get a legal title for a Model A Chassis - Tim Gross Sep. 20, 1998 at 20:13:18 (1)
  - Re: Title through your secetry of state for a Model A Chassis - ken wiewiora Sep. 21, 1998 at 07:48:09 (0)
NEED A TWO BLADE ORIGINAL FAN - Ken Smith Sep. 20, 1998 at 19:39:45 (1)
- Re: NEED A TWO BLADE ORIGINAL FAN - H. L. Chauvin Sep. 24, 1998 at 21:01:35 (0)
For Sale 1929 Special Coupe - Tom McMenamin Sep. 20, 1998 at 18:36:19 (0)
28-31 New Brake relinings for sale - Ron Jacobson Sep. 20, 1998 at 18:06:37 (0)
FS Late 31 town sedan - craig Sep. 20, 1998 at 12:23:42 (0)
1/16 Model A Model Kits - David McGrady Sep. 19, 1998 at 22:58:13 Embeded - (LINK) (2)
- Re: 1/16 Model A Model Kits - jef Sep. 21, 1998 at 13:32:08 (1)
  - Re: 1/16 Model A Model Kits - David McGrady Sep. 21, 1998 at 16:10:09 Embeded - (LINK) (0)
Leaf Spring Lubrication - Galen Lutz Sep. 19, 1998 at 15:27:04 (9)
- Re: Leaf Spring Lubrication - Bob Rentz Sep. 22, 1998 at 17:57:51 (1)
  - Re: Leaf Spring Lubrication - Bob Rentz Sep. 22, 1998 at 18:12:28 (0)
- slick springs - MRR Sep. 21, 1998 at 16:26:19 (2)
  - Re: slick springs - Marco Sep. 21, 1998 at 17:05:46 (1)
    - unsightly springs - MRR Sep. 22, 1998 at 07:35:53 (0)
- Re: Leaf Spring Lubrication - Bob Bidonde Sep. 21, 1998 at 13:18:31 (1)
  - Re: Leaf Spring Lubrication - Marco Sep. 21, 1998 at 13:57:39 (0)
- Re: Graphite Spray - Jeff Sep. 21, 1998 at 13:11:14 (0)
- Re: Leaf Spring Lubrication - Marco Sep. 21, 1998 at 11:42:35 (0)
Boy, Do I have the parts - Burt Becker Sep. 19, 1998 at 11:38:37 (2)
- Re: Boy, Do I have the parts - Burt Becker Sep. 19, 1998 at 16:46:10 (0)
- Re: Boy, Do I have the parts - Bill U. Sep. 19, 1998 at 15:44:19 (0)
coil connections - Wayne Parker Sep. 19, 1998 at 00:59:55 (2)
- Re: coil connections - Joel Rapose Sep. 19, 1998 at 20:32:18 (0)
- Re: coil connections - Marco Tahtaras Sep. 19, 1998 at 02:16:45 (0)
Model "A" Ford die-cast Toys - Frap Sep. 18, 1998 at 22:53:45 (2)
- Re: Model "A" Ford die-cast Toys - Ray C Sep. 19, 1998 at 16:12:39 (0)
- Re: Model "A" Ford die-cast Toys - Bill Sep. 19, 1998 at 07:30:38 Embeded - (PIC) (LINK) (0)
Fire Truck bed for a Model A Pickup - Mick Wilz Sep. 18, 1998 at 19:10:06 (0)
Another brake question - Ken McGuire Sep. 18, 1998 at 18:31:36 (1)
- Re: Another brake question - Kevin Daly Sep. 23, 1998 at 13:54:43 (0)
Pick Up Boxes - Larry Hoyer Sep. 18, 1998 at 18:03:16 (7)
- THANKS! - Larry Hoyer Sep. 23, 1998 at 09:11:47 (0)
- Re: Pick Up Boxes - rick Sep. 21, 1998 at 19:08:50 (0)
- Re: Pick Up Boxes - John Icenhower Sep. 20, 1998 at 20:59:42 (3)
  - Re: Pick Up Boxes - Marco Sep. 21, 1998 at 12:02:40 (2)
    - Re: Pick Up Boxes - John Icenhower Sep. 22, 1998 at 20:26:10 (1)
      - Re: Pick Up Boxes - Thanks - Marco Sep. 22, 1998 at 20:47:51 (0)
- Re: Pick Up Boxes - Gary MacRunnel Sep. 18, 1998 at 23:46:34 (0)
Please take pity on the ignorant newcomer, Please?? - Fred S. Sep. 18, 1998 at 16:08:08 (5)
- Early Ford V8 Forum - Patrick Patterson Sep. 23, 1998 at 19:38:15 Embeded - (LINK) (0)
- Re: Please take pity on the ignorant newcomer, Please?? - Anthony Gal Sep. 19, 1998 at 10:39:09 (0)
- Re: Please take pity on the ignorant newcomer, Please?? - Jay Gienty Sep. 19, 1998 at 06:13:24 (0)
- Model T Ford Message Board - Pat Patterson Sep. 18, 1998 at 21:15:26 Embeded - (LINK) (0)
- Re: Please take pity on the ignorant newcomer, Please?? - Jeff Sep. 18, 1998 at 17:15:33 (0)
Which Green? - Eric Lowell Sep. 18, 1998 at 13:17:30 (3)
- Re: Which Green? - Dave Sturges Sep. 18, 1998 at 19:02:09 (0)
- Re: Which Green? - David Dewey Sep. 18, 1998 at 15:54:42 (0)
- Re: Which Green? - Glen Weilbaker Sep. 18, 1998 at 13:23:16 (0)
For Sale: 1930 Hubs and Drums - Harold Sep. 18, 1998 at 11:47:15 (0)
RADIATOR FOR SALE - JOHN Sep. 18, 1998 at 09:02:46 (2)
- Re: RADIATOR FOR SALE - GW Sep. 18, 1998 at 09:24:29 (1)
  - Re: RADIATOR FOR SALE - John Sep. 18, 1998 at 09:47:42 (0)
Why can't I put o-rings on my rear axle? - Harold Eiland Sep. 18, 1998 at 08:43:38 (1)
- 'pends on what's leak'in - Bob Carabbio Sep. 18, 1998 at 22:37:14 (0)
WANTED: Model A - Tyler Wind Sep. 17, 1998 at 23:10:39 (1)
- Re: WANTED: Model A - Scott Houtz Sep. 18, 1998 at 07:52:38 Embeded - (LINK) (0)
PART WANTED - Dominic Bellino Jr. Sep. 17, 1998 at 21:03:04 (0)
PART WANTED - Dominic Bellino Jr. Sep. 17, 1998 at 21:00:28 (0)
Valve Grinding and Guides - Glenn Spyksma Sep. 17, 1998 at 19:36:12 (3)
- Re: Valve Grinding and Guides - Carla Sep. 19, 1998 at 10:35:50 (0)
- Re: Valve Grinding and Guides - John Cannon Sep. 18, 1998 at 11:23:06 (0)
- Re: Valve Grinding and Guides - H. L. Chauvin Sep. 17, 1998 at 21:02:26 (0)
Well John, How about the Sputtering? - Tom McMenamin Sep. 17, 1998 at 18:57:33 (0)
Keeping my A dry inside during humid weather - James Shotwell Sep. 17, 1998 at 18:56:38 (1)
- Re: Keeping my A dry inside during humid weather - Joel Rapose Sep. 18, 1998 at 23:18:23 (0)
rim color - dan rossi Sep. 17, 1998 at 18:51:57 (4)
- Re: rim color - Marco Sep. 18, 1998 at 09:27:18 (2)
  - Re: rim color - GW Sep. 18, 1998 at 11:18:45 (1)
    - Re: rim color - Marco Sep. 18, 1998 at 12:41:28 (0)
- Re: rim color - Glen Weilbaker Sep. 18, 1998 at 07:07:16 (0)
30-31 Victoria or Sedan Convertible - Dan Sep. 17, 1998 at 17:51:27 (0)
Testing Model B Condensors - Larry Jenkins Sep. 17, 1998 at 13:54:12 (6)
- Re: Testing Model B Condensors - John Cannon Sep. 18, 1998 at 11:33:20 (1)
  - Re: Testing Model B Condensors - Larry Jenkins Sep. 18, 1998 at 14:13:03 (0)
- Re: Testing Model B Condensors - Fred Engelman Sep. 18, 1998 at 07:48:53 (1)
  - Re: Testing Model B Condensors - Larry Jenkins Sep. 18, 1998 at 14:08:08 (0)
- Re: Testing Model B Condensors - Fred Sep. 17, 1998 at 15:03:57 (0)
- Re: Testing Model B Condensors ways to do so - Ken Wiewiora Sep. 17, 1998 at 15:03:28 (0)
Trade: Unrest 28 Phaeton for running 28/29 A - Neil Mylar, Southern Calif. Sep. 17, 1998 at 13:39:39 (0)
Competitors? - Eduardo Sep. 17, 1998 at 08:30:26 (5)
- Re: Competitors? - John Icenhower Sep. 17, 1998 at 17:21:33 (1)
  - Re: Competitors? - John Icenhower Sep. 17, 1998 at 20:06:24 (0)
- Re: Competitors? - Jim McKee Sep. 17, 1998 at 16:29:35 (0)
- Re: Competitors? - Ken Sep. 17, 1998 at 15:53:33 (0)
- Re: Competitors? - Rick Botti Sep. 17, 1998 at 14:22:09 (0)
HELP -- CARBURETOR -- HELP - MGL Sep. 17, 1998 at 07:33:45 (2)
- Re: HELP -- CARBURETOR -- HELP - Bob Johnson Sep. 17, 1998 at 08:48:40 (0)
- Sounds like a double venturi to me. - MRR Sep. 17, 1998 at 08:41:46 (0)
Modern Trans for Model A - Tony Parisi Sep. 17, 1998 at 00:40:45 (7)
- Re: Modern Trans for Model A - Roger de Socarras Sep. 19, 1998 at 06:18:23 (0)
- Re: Modern Trans for Model A - Dick Sparks Sep. 17, 1998 at 07:04:18 (0)
- Re: Modern Trans for Model A - Bill Sep. 17, 1998 at 06:39:10 Embeded - (LINK) (0)
- Re: Modern Trans for Model A - Ray c Sep. 17, 1998 at 06:38:08 (3)
  - Re: Modern Trans for Model A - Bill Sep. 17, 1998 at 06:41:25 (2)
    - Re: Whoa price is higher than I thought - Ray C Sep. 17, 1998 at 15:15:31 (0)
    - Re: Modern Trans for Model A - Ray C Sep. 17, 1998 at 14:17:06 (0)
WINDOW MOLDING - LEROY Sep. 16, 1998 at 22:24:33 (0)
A rear end question - Larry Sep. 16, 1998 at 22:09:28 (1)
- In a word - NO - Bob Carabbio Sep. 18, 1998 at 15:32:08 (0)
Early Restorers For Sale/Trade - Joe Biller Sep. 16, 1998 at 21:59:29 (0)
FS Late 1931 Town Sedan - Craig Sep. 16, 1998 at 21:11:11 (0)
gummy intake valves - steve Sep. 16, 1998 at 21:09:19 (1)
- Re: gummy intake valves - John Cannon Sep. 17, 1998 at 11:03:35 (0)
Houdaille shock identification - Steve Watrous Sep. 16, 1998 at 21:05:41 (2)
- Re: Houdaille shock identification - Bill U Sep. 17, 1998 at 07:51:45 (1)
  - Re: Houdaille shock identification - Bobby Crumpley Sep. 17, 1998 at 11:06:23 (0)
Backfireing - Mike Campbell Sep. 16, 1998 at 20:23:28 (2)
- Re: Backfireing - Glen Weilbaker Sep. 17, 1998 at 07:32:58 (1)
  - Re: Backfireing - roger de Socarras Sep. 19, 1998 at 16:51:35 (0)
Horn Identification - Bill Sep. 16, 1998 at 18:29:55 Embeded - (LINK) (1)
- Horn Identification - jim mason Sep. 16, 1998 at 18:44:11 (0)
Need 19" Wire Wheel in New England - Marshall Jones Sep. 16, 1998 at 15:28:20 (2)
- Re: Need 19" Wire Wheel in New England - Fred Murphy Sep. 21, 1998 at 02:47:49 (0)
- Re: Need 19" Wire Wheel in New England - Burt Becker Sep. 20, 1998 at 09:20:46 (0)
Gas Tank - Jim Miller Sep. 16, 1998 at 10:46:31 (3)
- Online drawing - Bob Johnson Sep. 16, 1998 at 18:22:06 Embeded - (LINK) (0)
- Re: Gas Tank - Bill Sep. 16, 1998 at 12:37:48 Embeded - (LINK) (1)
  - Re: Gas Tank - another one - Bill Sep. 16, 1998 at 17:47:16 Embeded - (LINK) (0)
Wire Harness Clips on Radiator - Steve Sep. 16, 1998 at 07:20:12 (2)
- Re: Wire Harness Clips on Radiator - Marco Sep. 16, 1998 at 09:44:46 (1)
  - Re: Wire Harness Clips on Radiator - STEVE Sep. 17, 1998 at 13:54:20 (0)
FOR SALE - 1930 Deluxe Coupe - Marco Sep. 16, 1998 at 02:13:57 Embeded - (PIC) (LINK) (0)
paint - JW Sep. 15, 1998 at 23:26:44 (7)
- Re: paint - J W Sep. 17, 1998 at 19:03:08 (1)
  - Re: paint - Bill Sep. 20, 1998 at 17:37:53 Embeded - (LINK) (0)
- Re: paint - Bill Sep. 16, 1998 at 18:02:02 Embeded - (LINK) (0)
- Re: paint - Marco Sep. 16, 1998 at 09:34:56 (0)
- Re: paint - Glen Weilbaker Sep. 16, 1998 at 07:39:15 (2)
  - Model A Ford Paint Guide - doug handran Sep. 16, 1998 at 18:26:53 (1)
    - Re: Model A Ford Paint Guide - Marco Sep. 16, 1998 at 19:31:06 (0)
Stop that breather oil sliing!!!!!!! - Larry Maltz Sep. 15, 1998 at 19:45:56 (1)
- Re: Stop that breather oil sliing!!!!!!! - Bill Sep. 15, 1998 at 22:10:32 Embeded - (LINK) (0)
Detergent vs. Non-Detergent Oil: Here we go again! - Gordon Biggar Sep. 15, 1998 at 19:44:35 (6)
- Oil companies say - Bob Johnson Sep. 16, 1998 at 09:12:49 (2)
  - Re: Oil companies say - Gordon Biggar Sep. 16, 1998 at 10:33:21 (1)
    - Book #3 - Bob Carabbio Sep. 16, 1998 at 10:50:16 (0)
- Re: Detergent vs. Non-Detergent Oil: Here we go again! - Bill U Sep. 16, 1998 at 07:33:20 (0)
- Re: Babbit vs detergent oils??? - David Dewey Sep. 16, 1998 at 01:58:46 (0)
- Re: Detergent vs. Non-Detergent Oil: - H. L. Chauvin Sep. 15, 1998 at 22:46:33 (0)
New oil in differential: - Bill Power Sep. 15, 1998 at 18:08:29 (2)
- Re: New oil in differential: - Bill Sep. 15, 1998 at 22:13:22 Embeded - (LINK) (0)
- Re: New oil in differential: - Eric Lowell Sep. 15, 1998 at 19:55:51 (0)
Paint question - Barry Sep. 15, 1998 at 14:55:13 (4)
- Re: Paint question - Ray C Sep. 15, 1998 at 19:37:44 (2)
  - Re: Paint question - clarification - Marco Sep. 15, 1998 at 21:51:30 (1)
    - Re: Paint question - clarification - Ray C Sep. 16, 1998 at 07:37:17 (0)
- Re: Paint question - Marco Sep. 15, 1998 at 16:18:53 Embeded - (PIC) (LINK) (0)
Carb Adjustment - Tom Olson Sep. 15, 1998 at 11:17:47 (5)
- Re: Carb Adjustment - Kevin Daly Sep. 15, 1998 at 11:48:09 (4)
  - Re: Carb Adjustment - Frank Sep. 16, 1998 at 07:17:30 (2)
    - Re: Carb Adjustment - Glen Weilbaker Sep. 16, 1998 at 07:53:58 (0)
    - Re: Carb Adjustment - Kevin Daly Sep. 16, 1998 at 07:46:26 (0)
  - Re: Carb Adjustment - Bob Bidonde Sep. 15, 1998 at 13:24:02 (0)
Turn Signals - Tom Olson Sep. 15, 1998 at 11:14:16 (1)
- Re: Turn Signals - Dave Sturges Sep. 15, 1998 at 14:53:08 (0)
Tow Bar - Jack Cunningham Sep. 15, 1998 at 08:53:25 (3)
- Re: Tow Bar - tony Sep. 17, 1998 at 14:07:54 (0)
- Re: Tow Bar - Joel Rapose Sep. 15, 1998 at 19:36:55 (0)
- Re: Tow Bar - curt Sep. 15, 1998 at 13:13:04 (0)
30 Model Wheel - Scott Sep. 15, 1998 at 08:34:37 (1)
- Re: 30 Model Wheel - Bill U. Sep. 15, 1998 at 09:07:39 (0)
water pump housing - dan rossi Sep. 14, 1998 at 18:36:01 (1)
- Re: water pump housing - Marco Sep. 14, 1998 at 20:14:03 (0)
Radiator shell emblem - Court Sep. 14, 1998 at 16:37:35 (2)
- Re: Radiator shell emblem, a "little" trick!! - David Dewey Sep. 15, 1998 at 00:15:58 (0)
- Re: Radiator shell emblem - Bill U. Sep. 14, 1998 at 20:32:04 (0)
Wanted: Simmons carb for Model A - Rick Botti Sep. 14, 1998 at 15:22:35 (0)
Car dies if I step on the gas - John Dauphiny Sep. 14, 1998 at 13:18:00 (5)
- Creeping Crud... - Glen Weilbaker Sep. 14, 1998 at 13:55:34 (0)
- Re: STOP EVERYTHING - Kevin Daly Sep. 14, 1998 at 13:40:29 (3)
  - Re: STOP EVERYTHING - John Dauphiny Sep. 15, 1998 at 13:11:53 (1)
    - Re: STOP EVERYTHING - Kevin Daly Sep. 15, 1998 at 13:26:19 (0)
  - Re: STOP EVERYTHING - Fred Sep. 14, 1998 at 16:23:03 (0)
Oils-Gasoline VS Diesel - Rick Botti Sep. 14, 1998 at 12:48:28 (3)
- Re: Oils-Gasoline VS Diesel - James Shotwell Sep. 21, 1998 at 22:07:02 (0)
- Re: Oils-Gasoline VS Diesel - Dean Wood Sep. 15, 1998 at 10:28:26 (0)
- Re: Oils-Gasoline VS Diesel - Charlie Tosch Sep. 14, 1998 at 21:49:37 (0)
Model A 30 for sale: - Wade Sep. 14, 1998 at 11:48:30 (0)
"Double Clutching" - Benny Sep. 14, 1998 at 11:31:12 (4)
- Re: "Double Clutching" - Dan Sep. 14, 1998 at 18:08:55 (0)
- Re: "Double Clutching" - Marco Sep. 14, 1998 at 12:01:56 Embeded - (LINK) (0)
- Re: "Double Clutching" - Bill U Sep. 14, 1998 at 12:00:41 (0)
- Re: "Double Clutching" - Bryan Nieman Sep. 14, 1998 at 11:57:42 (0)
1928 Zenith with Brass fittings - Kevin Daly Sep. 14, 1998 at 10:29:02 (9)
- You've got the double vent bug? - MRR Sep. 15, 1998 at 08:35:24 (3)
  - Re: You've got the double vent bug? - Kevin Daly Sep. 17, 1998 at 07:09:38 (2)
    - It all comes down to money. - MRR Sep. 17, 1998 at 08:35:42 (1)
      - Re: It all comes down to money. - Kevin Daly Sep. 17, 1998 at 09:31:43 (0)
- Re: 1928 Zenith with Brass fittings - jim mason Sep. 14, 1998 at 12:31:16 (0)
- Re: 1928 Zenith with Brass fittings - Marco Sep. 14, 1998 at 11:52:56 (0)
- Re: 1928 Zenith with Brass fittings - Glen Weilbaker Sep. 14, 1998 at 10:56:22 (2)
  - Re: 1928 Zenith with Brass fittings - Kevin Daly Sep. 14, 1998 at 11:23:42 (1)
    - Just a thought - GW Sep. 14, 1998 at 11:56:50 (0)
Ammeter bounced and went negative only. - J.R. Aiello Sep. 14, 1998 at 09:19:36 Embeded - (LINK) (4)
- Re: Ammeter bounced and went negative only. - David Dewey Sep. 14, 1998 at 10:37:15 (0)
- Re: Ammeter bounced and went negative only. - Gordon Biggar Sep. 14, 1998 at 10:31:54 (2)
  - Re: Ammeter bounced and went negative only. - John Regan Sep. 14, 1998 at 12:47:58 Embeded - (LINK) (1)
    - Ammeter bounced and went negative only. - Thanks! - J.R. Aiello Sep. 15, 1998 at 23:09:54 (0)
Speedometer - Tom Sep. 13, 1998 at 20:09:52 (4)
- Re: Speedometer - John Dauphiny Sep. 14, 1998 at 14:32:40 (0)
- Re: Speedometer - E. Pitts Sep. 14, 1998 at 13:07:47 (0)
- Re: Speedometer - Bill U Sep. 13, 1998 at 20:27:09 (1)
  - Re: Speedometer - John Icenhower Sep. 13, 1998 at 21:28:04 (0)
Emergency brake carrier - George Hess Sep. 13, 1998 at 20:06:03 (3)
- Re: Inside & outside on bands too! - David Dewey Sep. 14, 1998 at 10:28:56 (0)
- Re: Emergency brake carrier - jim mason Sep. 14, 1998 at 09:14:35 (0)
- Re: Emergency brake carrier - Glen Weilbaker Sep. 14, 1998 at 07:59:55 (0)
Floor Pans ??? - Dave McGrady Sep. 13, 1998 at 19:09:58 (3)
- Re: Floor Pans ??? - Glen Weilbaker Sep. 14, 1998 at 07:50:47 (1)
  - Re: Floor Pans ??? - Bill U Sep. 14, 1998 at 09:19:58 (0)
- Re: Floor Pans ??? - Dave McGrady Sep. 13, 1998 at 19:20:22 Embeded - (LINK) (0)
Motor quits - Sky Hilts Sep. 13, 1998 at 18:40:14 (3)
- Re: Motor quits - Eric Lowell Sep. 13, 1998 at 19:24:09 (2)
  - Re: Motor quits - Bob O Sep. 15, 1998 at 11:55:01 (0)
  - Re: Vapor lock - Greg hitt Sep. 13, 1998 at 23:31:39 (0)
Stalling when stopping - Brian Burkert Sep. 13, 1998 at 17:46:58 (3)
- Re: Stalling when stopping - Glen Weilbaker Sep. 14, 1998 at 07:43:03 (1)
  - error - Brian Sep. 14, 1998 at 22:24:50 (0)
- Re: Who Knows? - Kevin Daly Sep. 14, 1998 at 07:36:03 (0)
AR pickup taillight bracket - Bill Sep. 13, 1998 at 17:27:59 Embeded - (LINK) (12)
- Re: AR pickup taillight bracket - Joe Sep. 15, 1998 at 08:59:00 (6)
  - Re: More AR pickup taillight bracket - Joe Sep. 17, 1998 at 06:23:31 (5)
    - Re: More AR pickup taillight bracket - Dan Partain Sep. 17, 1998 at 19:41:46 (1)
      - Re: More AR pickup taillight bracket - Joe Sep. 18, 1998 at 07:27:06 (0)
    - Re: More AR pickup taillight bracket - Bill Sep. 17, 1998 at 19:01:13 Embeded - (LINK) (2)
      - Be careful out there - Joe Sep. 18, 1998 at 07:52:51 (1)
        
        Re: Be careful out there - Bill Sep. 20, 1998 at 17:46:16 Embeded - (LINK) (0)
- Re: AR pickup taillight bracket - Dan Partain Sep. 14, 1998 at 22:36:35 (4)
  - Re: AR pickup taillight bracket - Bill Sep. 15, 1998 at 10:59:18 Embeded - (LINK) (3)
    - Re: AR pickup taillight bracket - Dan Partain Sep. 15, 1998 at 22:09:43 (2)
      - Re: AR pickup taillight bracket - Bill Sep. 15, 1998 at 22:21:46 Embeded - (LINK) (1)
        
        Re: AR pickup taillight bracket - Marco Sep. 16, 1998 at 02:44:38 (0)
Model A Horn - Max Sep. 13, 1998 at 15:54:31 (1)
- Re: Model A Horn - Gordon Biggar Sep. 13, 1998 at 16:26:44 (0)
main bearing repair - D. Smith Sep. 13, 1998 at 11:21:06 (1)
- Re: main bearing repair - ben jenkinson Sep. 13, 1998 at 20:23:26 (0)
WWWBoard Sortware Upgrades - Dale Clinton Sep. 13, 1998 at 10:38:38 Embeded - (PIC) (LINK) (2)
- Re: WWWBoard Sortware Upgrades - Dale Sep. 13, 1998 at 11:05:47 Embeded - (LINK) (0)
King Pin Thrust Bearing Clearance - Roger Dean Sep. 13, 1998 at 09:49:34 (5)
- Re: King Pin Thrust Bearing Clearance - Joel Rapose Sep. 14, 1998 at 09:29:58 (0)
- Re: King Pin Thrust Bearing Clearance - Roger Dean Sep. 14, 1998 at 07:05:18 (1)
  - Re: King Pin Thrust Bearing Clearance - Dave Sturges Sep. 14, 1998 at 09:08:43 (0)
- Re: King Pin Thrust Bearing Clearance - H.L. Chauvin Sep. 13, 1998 at 15:25:04 (0)
- Re: King Pin Thrust Bearing Clearance - Marco Sep. 13, 1998 at 14:07:27 (0)
Camshaft leak - HAL Sep. 13, 1998 at 07:05:15 (3)
- Sounds like warped housing. - Joe Sep. 15, 1998 at 12:27:05 (0)
- Re: Camshaft leak - Bob Bernard Sep. 13, 1998 at 10:26:19 (1)
  - Re: Camshaft leak - HAL Sep. 13, 1998 at 17:32:44 (0)
Cutouts with Diodes - how is it done? - Steve Mick Sep. 12, 1998 at 22:34:38 (8)
- Re:Even more diode stuff - alex Sep. 14, 1998 at 22:04:19 (0)
- Re: Cutouts with Diodes - how is it done? - John Regan Sep. 14, 1998 at 12:59:57 Embeded - (LINK) (2)
  - Questions about your regulator. - Glen Weilbaker Sep. 14, 1998 at 14:17:02 (1)
    - Re: Questions about your regulator. - John Regan Sep. 15, 1998 at 10:35:53 Embeded - (LINK) (0)
- Re: Cutouts with Diodes - how is it done? - Ben Jenkinson Sep. 13, 1998 at 20:51:58 (0)
- That's all it is - except - Bob Carabbio Sep. 13, 1998 at 02:17:15 (2)
  - Re: That's all it is - except - Larry Jenkins Sep. 13, 1998 at 16:32:41 (1)
    - more diode stuff - Bill Sep. 13, 1998 at 17:10:58 Embeded - (LINK) (0)
1929 Special Coupe For Sale - Tom McMenamin Sep. 12, 1998 at 19:47:26 (2)
- Re: 1929 Special Coupe For Sale - sam Sep. 12, 1998 at 21:38:30 (1)
  - Re: 1929 Special Coupe For Sale - Tom McMenamin Sep. 13, 1998 at 11:16:49 (0)
1929 Special coupe For Sale - tom McMenamin Sep. 12, 1998 at 19:46:19 (0)
how close do the judges look? - jim mason Sep. 12, 1998 at 12:30:40 (3)
- Re: how close do the judges look? - Marco Sep. 13, 1998 at 20:32:57 (0)
- Re: how close do the judges look? - David Dewey Sep. 12, 1998 at 15:12:30 (1)
  - Re: how close do the judges look? - jim mason Sep. 13, 1998 at 18:03:59 (0)
crankshafts - Charles Saxton Sep. 12, 1998 at 12:28:31 (3)
- Re: crankshafts - David Dewey Sep. 12, 1998 at 15:19:36 (1)
  - Good thought - - Bob Carabbio Sep. 13, 1998 at 02:22:06 (0)
- how low can you go? - Bob Carabbio Sep. 12, 1998 at 14:24:07 (0)
correct finish - Larry Sep. 12, 1998 at 11:30:38 (1)
- Re: correct finish - jim mason Sep. 12, 1998 at 12:20:06 (0)
Woody Wax - George Sep. 11, 1998 at 19:29:01 (1)
- Re: Woody Wax - Ray C Sep. 12, 1998 at 11:42:26 (0)
Valve adjustment in early MODEL A - Eduardo Sep. 11, 1998 at 15:45:01 (1)
- Re: Valve adjustment in early MODEL A - David Dewey Sep. 12, 1998 at 11:06:50 (0)
Carb. Rebuild - Brad Sep. 11, 1998 at 15:20:36 (1)
- Re: Carb. Rebuild - Dave Sturges Sep. 11, 1998 at 16:57:09 (0)
Weekend Puzzler - Kevin Daly Sep. 11, 1998 at 14:45:55 (4)
- Re: Weekend Puzzler - Marco Sep. 11, 1998 at 18:28:41 (3)
  - AHMEN!!!!! - David Dewey Sep. 12, 1998 at 10:58:21 (0)
  - Re: Weekend Puzzler - jim upton Sep. 12, 1998 at 06:19:47 (1)
    - Re: Thank You - Kevin Daly Sep. 14, 1998 at 07:25:22 (0)
Looking for Head Gasket this weekend in DC area - curt Sep. 11, 1998 at 13:42:41 (1)
- Re: Looking for Head Gasket this weekend in DC area - Tom Grady Sep. 12, 1998 at 21:58:23 (0)
shocks - Dan Sep. 11, 1998 at 00:07:12 (5)
- Re: shocks - Bob East Sep. 11, 1998 at 10:43:33 (1)
  - Re: shocks - billu Sep. 11, 1998 at 11:41:49 (0)
- Re: shocks - Dan Sep. 11, 1998 at 06:02:15 (0)
- Re: shocks - Bill U Sep. 11, 1998 at 05:52:02 (1)
  - Re: shocks - Bill U Sep. 11, 1998 at 07:49:40 (0)
Model A Camping Tailer - Dale Beckman Sep. 10, 1998 at 22:40:05 (2)
- Re: Model A Camping Tailer - Joel Rapose Sep. 14, 1998 at 09:36:31 (0)
- Re: Model A Camping Tailer - Tony Sillman Sep. 12, 1998 at 01:03:00 (0)
What gives? Can't read some messages, just follow-ups - Charlie Tosch Sep. 10, 1998 at 21:40:52 (2)
- Browser issue - Bob Carabbio Sep. 13, 1998 at 07:56:11 (0)
- Re: What gives? Can't read some messages, just follow-ups - Fred Sep. 11, 1998 at 08:05:28 (0)
Wanted: Music sheet "Henry Made a Lady Out of Lizzie" - Robert Mechner Sep. 10, 1998 at 20:48:58 (0)
Don't want to start it again, but!!!!!!!!!! - Bill U Sep. 10, 1998 at 19:33:05 (0)
Don't want to start it again, but!!!!!!!!!! - Bill U Sep. 10, 1998 at 19:32:49 (4)
- A-400 group - David Dewey Sep. 11, 1998 at 00:02:50 (2)
  - Re: A-400 group - Marco Sep. 11, 1998 at 00:15:35 (1)
    - Re: A-400 group - Bill U Sep. 11, 1998 at 05:47:10 (0)
- Re: Don't want to start it again, but!!!!!!!!!! - Marco Sep. 10, 1998 at 21:05:48 (0)
EXHAUST MAN. HEATER - Jeff Sep. 10, 1998 at 18:18:00 (4)
- Re: EXHAUST MAN. HEATER - Marco Sep. 10, 1998 at 19:22:21 (3)
  - Re: EXHAUST MAN. HEATER - Bill Sep. 10, 1998 at 21:34:44 (2)
    - Use question - Bob Carabbio Sep. 12, 1998 at 17:22:20 (1)
      - Re: Use question - Bill Sep. 13, 1998 at 20:08:46 Embeded - (LINK) (0)
for sale - Jack Sep. 10, 1998 at 17:55:10 (0)
Middle School Project - John R,. Bayer Sep. 10, 1998 at 17:41:45 (1)
- Re: Middle School Project - Ray C Sep. 10, 1998 at 17:52:45 (0)
Tie Rod Rebuild - Jake Mandator Sep. 10, 1998 at 16:04:24 (1)
- Re: Tie Rod Rebuild - Glen Weilbaker Sep. 11, 1998 at 07:05:13 (0)
engine re-build - gary doner Sep. 10, 1998 at 14:33:47 (0)
Installing Alyernator - George Sep. 10, 1998 at 11:36:25 (8)
- Re: Installing Alyernator solutions - Ken Wiewiora Sep. 10, 1998 at 15:18:32 (7)
  - Reply to Ken's questions - George Sep. 11, 1998 at 15:57:13 (0)
  - Reply to Ken's questions - George Sep. 11, 1998 at 15:56:19 (2)
    - Here is your answer - KEN WIEWIORA Sep. 14, 1998 at 07:58:45 (0)
    - Here is your answer - KEN WIEWIORA Sep. 14, 1998 at 07:51:54 (0)
  - Re: Installing Alyernator solutions - KEN WIEWIORA Sep. 10, 1998 at 21:51:53 (1)
    - Re: Installing Alyernator solutions - KEN WIEWIORA Sep. 10, 1998 at 21:55:34 (0)
  - Re: Installing Alyernator solutions - Larry Jenkins Sep. 10, 1998 at 15:43:05 (0)
Sealed beam conversion - Jim Sep. 10, 1998 at 09:33:16 (2)
- Re: Sealed beam conversion - doug handran Sep. 10, 1998 at 19:18:55 (0)
- Re: Sealed beam conversion - Paul Sep. 10, 1998 at 18:52:26 (0)
Parts For Sale Cheap - Larry Sep. 10, 1998 at 07:59:39 (0)
Parts For Sale Cheap - Larry Sep. 10, 1998 at 07:59:23 (2)
- Re: Parts For Sale Cheap - Larry Sep. 10, 1998 at 20:27:11 (0)
- Re: Parts For Sale Cheap - Joe Nash Sep. 10, 1998 at 16:59:29 (0)
license plate brackets - bruce n Sep. 09, 1998 at 23:34:31 (1)
- Re: license plate brackets - Marco Sep. 10, 1998 at 01:01:40 (0)
Welled fender for sale - Tom T. Sep. 09, 1998 at 21:20:24 (1)
- Re: Welled fender for sale - Tom T. Sep. 10, 1998 at 12:05:14 (0)
hood corner question - Bill Sep. 09, 1998 at 21:19:28 (5)
- Re: hood corner question - Marco Sep. 10, 1998 at 01:42:48 (3)
  - Re: hood corner question - Bill Sep. 10, 1998 at 11:50:46 (2)
    - Re: hood corner question - Marco Sep. 10, 1998 at 12:15:26 (1)
      - Re: hood corner question - Bill Sep. 10, 1998 at 21:40:59 (0)
- Re: hood corner question - Jerry Isbell Sep. 09, 1998 at 21:29:26 (0)
Removing Bonded Brakes from Shoes - Pat Patterson Sep. 09, 1998 at 21:11:36 (4)
- Woven on front, Molded on back... - Pat Patterson Sep. 10, 1998 at 22:02:09 (1)
  - Re: Woven on front, Molded on back... - Marco Sep. 10, 1998 at 23:39:24 (0)
- Re: Removing Bonded Brakes from Shoes - DJ.Voyce Sep. 10, 1998 at 01:03:26 (0)
- Re: Removing Bonded Brakes from Shoes - Bill Sep. 09, 1998 at 21:27:52 (0)
Parts For Sale Cheap - Larry Sep. 09, 1998 at 20:13:33 (6)
- Re: Parts For Sale Cheap - Zan Sep. 10, 1998 at 19:34:42 (0)
- Re: Parts For Sale Cheap - Ray C Sep. 10, 1998 at 07:44:41 (0)
- Re: Parts For Sale Cheap - Charlie Booher Sep. 10, 1998 at 07:43:51 (0)
- Re: Parts For Sale Cheap - Larry Sep. 10, 1998 at 07:43:03 (0)
- Re: Parts For Sale Cheap - Kevin Daly Sep. 10, 1998 at 07:32:41 (0)
- Re: Parts For Sale Cheap reply - CECIL Sep. 10, 1998 at 05:44:14 (0)
Roadster top irons - Barry Sep. 09, 1998 at 18:54:26 (1)
- Re: Roadster top irons - Ted Koudys Sep. 09, 1998 at 21:10:49 (0)
Standard vs. Special Coupe? - Michael W. Sep. 09, 1998 at 13:46:55 (3)
- Re: Standard vs. Special Coupe? - Dave Sep. 19, 1998 at 18:10:35 (0)
- Re: Standard vs. Special Coupe? - Dave Sturges Sep. 09, 1998 at 16:13:27 (0)
- Re: Standard vs. Special Coupe? - Bob Johnson Sep. 09, 1998 at 14:58:13 (0)
Hot Amp Meter and Starting Problems - Ken Forse Sep. 09, 1998 at 13:20:15 (2)
- Re: Hot Amp Meter and Starting Problems - John Regan Sep. 10, 1998 at 00:10:46 (0)
- Sounds like maybe- - Bob Carabbio Sep. 09, 1998 at 18:45:18 (0)
For sale 28-29 front fenders - Bill G Sep. 09, 1998 at 12:40:59 (0)
My Life Hinges on Your Reply! - Kevin Daly Sep. 09, 1998 at 11:18:37 (6)
- Re: My Life Hinges on Your Reply! - Bill U Sep. 09, 1998 at 12:31:58 (3)
  - Re: Swap Site???? - Halowe Sep. 10, 1998 at 16:25:29 (2)
    - At Least 4 Model A Swap Sites Online - Pat Patterson Sep. 10, 1998 at 21:26:52 (1)
      - Re: At Least 4 Model A Swap Sites Online - Halowe Sep. 11, 1998 at 08:59:45 (0)
- Re: My Life Hinges on Your Reply! - Bill U Sep. 09, 1998 at 12:29:40 (0)
- Re: My Life Hinges on Your Reply! - geo shebley Sep. 09, 1998 at 12:05:14 (0)
Raven Finish - geo shebley Sep. 09, 1998 at 09:50:36 (7)
- Re: Raven Finish - Dennis Smith Sep. 09, 1998 at 18:08:11 (0)
- Re: Raven Finish - Bill U Sep. 09, 1998 at 11:18:03 (5)
  - Re: Raven Finish - Larry Jenkins Sep. 09, 1998 at 14:08:59 (4)
    - Re: Raven Finish - geo Sep. 09, 1998 at 15:51:03 (3)
      - Re: Raven Finish - Carla Sep. 09, 1998 at 16:38:04 (2)
        
        Re: Raven Finish - Larry Jenkins Sep. 10, 1998 at 15:50:20 (1)
        
        Hardening & Tempering - Joe Sep. 11, 1998 at 13:42:07 (0)
Dodge brothers and V8 - Eduardo Sep. 09, 1998 at 09:45:31 (4)
- Re: Dodge brothers and V8 - geo shebley Sep. 09, 1998 at 10:46:16 (3)
  - Re: mr ford and V8 - Carla Sep. 09, 1998 at 16:54:15 (2)
    - The X8 engine - Bob Johnson Sep. 09, 1998 at 17:44:43 (1)
      - Re: The X8 and other 8 cyl. Ford engines - Halowe Sep. 10, 1998 at 09:48:43 (0)
Front End Follies - Kevin Daly Sep. 09, 1998 at 07:31:41 (1)
- More Questions Young Mr. - Glen Weilbaker Sep. 09, 1998 at 08:21:33 (0)
Steering box oil - Mark Wheeler Sep. 09, 1998 at 02:24:19 (2)
- Re: Steering box oil - Bill Sep. 09, 1998 at 16:09:25 (0)
- Re: Steering box oil - Kevin Daly Sep. 09, 1998 at 06:46:14 (0)
battery size and holder - James Shotwell Sep. 08, 1998 at 22:53:32 (6)
- Re: battery size and holder - Marco Sep. 10, 1998 at 02:39:09 (0)
- Re: battery size and holder - John Icenhower Sep. 09, 1998 at 22:45:34 (0)
- Re: battery size and holder - Tim Wildey Sep. 09, 1998 at 07:40:40 (0)
- Re: battery size and holder and other things - Joe Sep. 09, 1998 at 07:02:41 (2)
  - Re: battery size and holder and other things - Rick Black Sep. 09, 1998 at 19:46:06 (0)
  - Re: battery size and holder and other things - Glen Weilbaker Sep. 09, 1998 at 07:46:19 (0)
Stuck rachet nut - Glenn Spyksma Sep. 08, 1998 at 21:17:02 (4)
- Re: Stuck rachet nut - Ben Jenkinson Sep. 12, 1998 at 21:29:26 (0)
- Re: Stuck rachet nut - DJ.Voyce Sep. 09, 1998 at 00:44:37 (0)
- Re: Stuck rachet nut - H. L. Chauvin Sep. 08, 1998 at 22:23:55 (1)
  - Follow up : Stuck rachet nut "success" - Alex Spyksma Sep. 09, 1998 at 20:20:58 (0)
Wood Woes - TR Sep. 08, 1998 at 18:37:43 (14)
- Re: Wood Woes - David Dewey Sep. 09, 1998 at 11:23:03 (5)
  - Re: Wood Woes - GW Sep. 09, 1998 at 13:03:24 (4)
    - Re: visor Welting Material - David Dewey Sep. 09, 1998 at 23:45:18 (3)
      - Re: visor Welting Material - Marco Sep. 10, 1998 at 00:16:31 (2)
        
        Re: visor Welting Material - Scott Houtz Sep. 10, 1998 at 08:56:27 (1)
        
        Re: visor Welting Material; which models - David Dewey Sep. 10, 1998 at 09:50:26 (0)
- Re: Wood Woes - Fred Sep. 09, 1998 at 08:46:24 (0)
- Re: Wood Woes - Fred Sep. 09, 1998 at 08:23:19 (0)
- Woodn't have it any other way, - Glen Weilbaker Sep. 09, 1998 at 07:36:38 (0)
- Re: Wood Woes - Ken McGuire Sep. 08, 1998 at 21:15:36 (2)
  - Producers - Brad Sep. 08, 1998 at 23:03:46 (1)
    - Re: Producers - Ray C Sep. 09, 1998 at 07:43:08 (0)
- Wood Kits - Brad Sep. 08, 1998 at 19:49:39 (0)
- Re: Wood Woes - Send it back!!! - Marco Sep. 08, 1998 at 19:19:17 (0)
Model A Ford parts - Lew Palmer Sep. 08, 1998 at 17:24:49 (0)
I got a 1929 Ford Model A owners manual - Jasmyn MacNeil Sep. 08, 1998 at 15:31:55 (0)
Dome Light Wanted for Briggs Fordor - Richard Inzana Sep. 08, 1998 at 15:12:15 (0)
REAR END - Michael D Sep. 08, 1998 at 14:53:39 (4)
- Re: REAR END - DJ.Voyce Sep. 09, 1998 at 00:36:51 (0)
- Re: REAR END - Jay Gienty Sep. 08, 1998 at 21:12:42 (0)
- Re: REAR END axle housing welds - Joe Gruller Sep. 08, 1998 at 20:11:59 (0)
- Re: REAR END - Bill Sep. 08, 1998 at 18:22:33 (0)
Differential Blues - MRR Sep. 08, 1998 at 10:50:22 (0)
Differential assembly - MRR Sep. 08, 1998 at 08:10:55 (2)
- Re: Differential assembly - Jack Richard Sep. 08, 1998 at 12:39:19 (0)
- Re: Differential assembly - Marco Sep. 08, 1998 at 10:32:13 (0)
EXPLODED VIEWS REARE AXEL. - HENRIK ANDERSSON Sep. 08, 1998 at 02:32:44 (2)
- Re: EXPLODED VIEWS REARE AXEL. - Paul Sep. 08, 1998 at 08:05:36 (1)
  - Rear Axle Illustration - Rick Black Sep. 08, 1998 at 08:09:55 (0)
Numbers found - Walter Sep. 08, 1998 at 00:19:38 (11)
- Re: Numbers found - Dave Sturges Sep. 08, 1998 at 08:21:00 (9)
  - Finding numbers etc. - David Dewey Sep. 09, 1998 at 11:35:44 (0)
  - Re: Numbers found - Tomas Jutebring Sep. 09, 1998 at 07:16:18 (1)
    - Re: Numbers found - Dave Sturges Sep. 09, 1998 at 16:46:32 (0)
  - 30 Model A's ? - Tim Wildey Sep. 08, 1998 at 14:06:49 (5)
    - Re: 30 Model A's ? - Dave Sturges Sep. 09, 1998 at 16:59:42 (0)
    - Body Stamp Location, Try #2 - Bobby Crumpley Sep. 08, 1998 at 21:59:12 (0)
    - Body Stamp Location - Bobby Crumpley Sep. 08, 1998 at 21:48:53 (0)
    - Re: 30 Model A's ? - Paul Sep. 08, 1998 at 15:13:04 (1)
      - Re: 30 Model A's ? - Dave Sturges Sep. 09, 1998 at 17:10:20 (0)
- Re: Numbers found - jim mason Sep. 08, 1998 at 06:37:23 (0)
1931 FORD Model A Pickup Truck - Pat Patterson Sep. 07, 1998 at 20:02:47 (0)
The ultimate Overdrive - Bill G Sep. 07, 1998 at 19:57:50 (1)
- Re: The ultimate Overdrive - jcunningham@home.com Sep. 13, 1998 at 14:56:55 (0)
'30/'31 Instrument Panel - Pat Patterson Sep. 07, 1998 at 19:49:51 (0)
Tillotson and misc carb parts for sale - Pat Patterson Sep. 07, 1998 at 19:37:33 (0)
stuck bendix - larrym Sep. 07, 1998 at 15:30:58 (3)
- Re: stuck bendix - DJ.Voyce Sep. 08, 1998 at 00:32:12 (0)
- Re: stuck bendix - Ben Jenkinson Sep. 07, 1998 at 20:13:07 (1)
  - Re: stuck bendix - larrym Sep. 09, 1998 at 21:27:14 (0)
Model A Ford - Rye Sep. 06, 1998 at 21:56:50 (4)
- Re: Model A Ford - MRR Sep. 08, 1998 at 14:24:11 (0)
- Wiring Diagram - Bob Johnson Sep. 08, 1998 at 09:12:43 (0)
- Re: Model A Ford - doug handran Sep. 07, 1998 at 08:19:09 (0)
- Wiring Diagram - Rick Black Sep. 06, 1998 at 22:32:19 (0)
Brake Service in Sacramento, Ca - Pat Patterson Sep. 06, 1998 at 20:59:27 (10)
- Re: Brake Service in Sacramento, Ca - H.L. Chauvin Sep. 07, 1998 at 16:33:44 (1)
  - Re: Brake Service in Sacramento, Ca - Pat Patterson Sep. 07, 1998 at 16:49:06 (0)
- "How to Stop on a Dime " - Tim Wildey Sep. 07, 1998 at 07:31:55 (3)
  - Re: "How to Stop on a Dime " - Pat Patterson Sep. 07, 1998 at 13:18:52 (2)
    - Re: "How to Stop on a Dime " - Tim Wildey Sep. 07, 1998 at 14:31:35 (1)
      - Re: "How to Stop on a Dime " - Pat Patterson Sep. 09, 1998 at 21:07:29 (0)
- Brakes - Rick Black Sep. 06, 1998 at 22:28:49 (3)
  - Re: Brakes-Misconception! - DJ.Voyce Sep. 08, 1998 at 00:54:17 (0)
  - Re: Brakes - Pat Patterson Sep. 06, 1998 at 22:55:31 (1)
    - Re: Brakes - David Dewey Sep. 07, 1998 at 01:31:15 (0)
QMI Gear Treatment - Fred Engelman Sep. 06, 1998 at 20:09:54 (3)
- Re: QMI Gear Treatment - Jerry Isbell Sep. 06, 1998 at 21:33:27 (2)
  - Re: QMI Gear Treatment - Kevin Daly Sep. 08, 1998 at 11:19:17 (1)
    - Re: QMI Gear Treatment - Fred Engelman Sep. 08, 1998 at 13:38:22 (0)
storage questions - doug handran Sep. 06, 1998 at 18:58:58 (2)
- Re: storage questions - David Dewey Sep. 07, 1998 at 10:44:26 (0)
- Re: storage questions - James Shotwell Sep. 06, 1998 at 21:39:40 (0)
1929 Ford Pickup Headlights for Sale - Frank Posey Sep. 06, 1998 at 18:09:36 (0)
Deluxe Tudor Front Seats - Tom Keehan Sep. 06, 1998 at 15:56:04 (4)
- Re: Deluxe Tudor Front Seats - Rick Black Sep. 06, 1998 at 22:25:16 (0)
- Re: Deluxe Tudor Front Seats - Bill U Sep. 06, 1998 at 17:54:14 (2)
  - Re: Deluxe Tudor Front Seats - Tom Keehan Sep. 09, 1998 at 19:02:51 (1)
    - Re: Deluxe Tudor Front Seats - Bill U. Sep. 10, 1998 at 12:55:33 (0)
Model A parts for sale - Lew Palmer Sep. 06, 1998 at 13:54:27 (1)
- Re: Model A parts for sale - Randy Caroll Sep. 07, 1998 at 20:43:39 (0)
31 Ford Phaeton interior & top - Bill G Sep. 06, 1998 at 10:44:15 (0)
For Sale - l929 Model A - D Plant Sep. 06, 1998 at 06:42:35 (2)
- Re: For Sale - l929 Model A - D. Plant Sep. 07, 1998 at 17:20:17 (0)
- Re: For Sale - l929 Model A - D Plant Sep. 07, 1998 at 17:07:09 (0)
Brake Pedal Shaft Adjustment - Ken M Sep. 05, 1998 at 21:08:54 (1)
- Re: Brake Pedal Shaft Adjustment - Paul Sep. 05, 1998 at 22:11:52 (0)
turn sigals, anyone used this kit? - James Shotwell Sep. 05, 1998 at 21:00:30 (6)
- Re: turn sigals, anyone used this kit? - Larry Sep. 26, 1998 at 08:27:10 (0)
- Re: turn sigals, anyone used this kit? - Tom Olson Sep. 13, 1998 at 17:27:38 (0)
- Met Roger & Panel Delivery - Tim Wildey Sep. 07, 1998 at 14:18:09 (0)
- Re: turn sigals, anyone used this kit? - Fred Engelman Sep. 07, 1998 at 13:08:55 (0)
- Re: turn sigals, anyone used this kit? - Ray C Sep. 06, 1998 at 10:04:40 (0)
- Re: turn sigals, anyone used this kit? - Bobby Crumpley Sep. 06, 1998 at 08:11:13 (0)
float-a-motor mounts - Larry Sep. 05, 1998 at 20:06:15 (1)
- Re: float-a-motor mounts - Bill Pursel Sep. 07, 1998 at 09:00:24 (0)
29 Model A roadster pickup For Sale - Steve Cherry Sep. 05, 1998 at 16:16:32 (4)
- Re: 29 Model A roadster pickup For Sale - bill G Sep. 08, 1998 at 20:42:28 (3)
  - Re: 29 Model A roadster pickup For Sale - Bill G Sep. 09, 1998 at 21:08:15 (2)
    - Re: 29 Model A roadster pickup For Sale - Steve Sep. 10, 1998 at 16:49:43 (1)
      - Re: 29 Model A roadster pickup For Sale - david hunsader Sep. 13, 1998 at 21:57:11 (0)
Maximum Recommended MPH - Pat Patterson Sep. 05, 1998 at 15:36:10 (9)
- Re: Maximum Recommended MPH - Bill Sep. 07, 1998 at 17:52:24 (0)
- Re: Maximum Recommended MPH - geo. shebley Sep. 07, 1998 at 12:58:08 (1)
  - Re: Maximum Recommended MPH - Pat Patterson Sep. 07, 1998 at 13:31:32 (0)
- Re: Maximum Recommended MPH - Brian Burkert Sep. 06, 1998 at 10:07:20 (2)
  - In the old days- - Bob Carabbio Sep. 06, 1998 at 13:20:37 (1)
    - here, here - Brian Sep. 07, 1998 at 15:15:31 (0)
- Re: Maximum Recommended MPH - Rick Black Sep. 05, 1998 at 23:47:44 (2)
  - Re: Maximum Recommended MPH - Greg Hitt Sep. 05, 1998 at 23:59:53 (1)
    - Re: Maximum Recommended MPH - Tom Sep. 06, 1998 at 02:15:42 (0)
Re: One more time on the Build date, please - Larry Metzgar Sep. 05, 1998 at 05:53:16 (9)
- Re: One more time on the Build date, please - Craig VandenBerg Sep. 08, 1998 at 15:17:26 (0)
- Re: One more time on the Build date, please - Bill Sep. 07, 1998 at 17:58:43 (0)
- Re: One more time on the Build date, please - Fred H. Engelman Sep. 06, 1998 at 13:17:10 (2)
  - Re: One more time on the Build date, please - John Icenhower Sep. 07, 1998 at 22:33:24 (0)
  - Re: One more time on the Build date, please - Jay Gienty Sep. 06, 1998 at 17:58:06 (0)
- Re: One more time on the Build date, please - Dave Sturges Sep. 06, 1998 at 09:50:32 (2)
  - Re: One more time on the Build date, please - C.W. Sep. 08, 1998 at 00:15:25 (1)
    - Re: One more time on the Build date, please - Dave Sturges Sep. 08, 1998 at 08:47:03 (0)
- Re: Build date, maybe1927? - Larry Metzgar Sep. 05, 1998 at 08:37:46 (0)
Tightening water outlet - Jack Sep. 05, 1998 at 05:18:18 (2)
- Re: Tightening water outlet - Jack Richard Sep. 06, 1998 at 10:23:53 (0)
- Re: Tightening water outlet - DJ.Voyce Sep. 05, 1998 at 06:50:10 (0)
Jerry Lawrey--an important message for you. - Brian Burkert Sep. 04, 1998 at 23:59:04 (1)
- Re: Jerry Lawrey--an important message for you. - Brian Burkert Sep. 05, 1998 at 00:05:43 (0)
Just taking a long shot - Court Sep. 04, 1998 at 22:33:41 (0)
Briggs Victoria.....Myth or Merit? - Black Fred Sep. 04, 1998 at 20:35:43 (1)
- Re: Briggs Victoria.....Myth or Merit? - John Icenhower Sep. 04, 1998 at 23:31:57 (0)
Who makes the 2000cc Pinto engine conversions for the Model A? - Neil Mylar Sep. 04, 1998 at 19:51:30 (3)
- Re: Who makes the 2000cc Pinto engine conversions for the Model A? - geo. shebley Sep. 07, 1998 at 14:28:44 (0)
- Re: Who makes the 2000cc Pinto engine conversions for the Model A? - Fred Engelman Sep. 05, 1998 at 12:26:18 (1)
  - Re: Who makes the 2000cc Pinto engine conversions for the Model A? - Rick Black Sep. 05, 1998 at 23:51:07 (0)
Windlace Retainer needed - Cass Stewart Sep. 04, 1998 at 18:52:38 (0)
Windlace Retainer needed - Cass Stewart Sep. 04, 1998 at 18:51:38 (0)
Wanted 4:11 gears for Model A rear end - Neil Mylar Sep. 04, 1998 at 14:24:30 (1)
- Re: Wanted 4:11 gears for Model A rear end - Joel Rapose Sep. 04, 1998 at 18:55:36 (0)
Head Nut Tightening - Kevin Daly Sep. 04, 1998 at 07:52:19 (8)
- Oochy, ouch ,ouch - Glen Weilbaker Sep. 04, 1998 at 13:30:08 (4)
  - Re: !@#$%^&*%$#* Distributor - Kevin Daly Sep. 04, 1998 at 14:21:18 (3)
    - I wonder... - GW Sep. 04, 1998 at 14:40:53 (2)
      - Hey!! Them's my lines!!! - T Monk Sep. 05, 1998 at 15:33:27 (1)
        
        Please forgive me - GW Sep. 08, 1998 at 07:14:48 (0)
- Re: Head Nut Tightening - Ray C Sep. 04, 1998 at 13:09:11 (0)
- Not that critical - Joe Sep. 04, 1998 at 11:15:52 (0)
- Re: Head Nut Tightening - Joel Rapose Sep. 04, 1998 at 10:26:53 (0)
Wife wants automatic - Jim R Sep. 04, 1998 at 02:41:18 (2)
- Re: Wife wants automatic - Joel Rapose Sep. 04, 1998 at 10:30:54 (1)
  - Re: Wife wants automatic - Rick Black Sep. 04, 1998 at 23:56:03 (0)
A correction on my E-mail address! - JD Sep. 03, 1998 at 23:51:10 (0)
trailerin' my "A"! - JD Sep. 03, 1998 at 22:15:49 (1)
- Re: trailerin' my "A"! - Joel Rapose Sep. 04, 1998 at 10:39:33 (0)
Getting frustrated tring to find AAC Parts - Frank Sep. 03, 1998 at 21:43:26 (1)
- Re: Getting frustrated tring to find AAC Parts - John Icenhower Sep. 03, 1998 at 22:47:31 (0)
Model "B" Engine Serial Number - Bob MacNeil Sep. 03, 1998 at 21:30:49 (2)
- Re: Model "B" Engine Serial Number - John Icenhower Sep. 04, 1998 at 15:50:14 (0)
- Re: Model "B" Engine Serial Number - Bill Sep. 03, 1998 at 21:38:00 (0)
Model "B" Engine Number - Bob MacNeil Sep. 03, 1998 at 21:21:50 (1)
- Re: Model "B" Engine Number - Bill Sep. 07, 1998 at 18:05:59 (0)
light switch rod - G Adkins Sep. 03, 1998 at 20:39:33 (1)
- Re: light switch rod - Bill Sep. 03, 1998 at 21:42:10 (0)
Tag-a-Long Trl. - George Stewart Sep. 03, 1998 at 19:31:40 (0)
Steering Sector Housing Core - WANTED !! - Tim Wildey Sep. 03, 1998 at 16:39:53 (1)
- Re: steering box! - bill g Sep. 04, 1998 at 20:15:47 (0)
1929 Roadster Pickup for Sale - David Block Sep. 03, 1998 at 12:25:29 (0)
Becoming a Model "A" judge?? - Mark Earl Sep. 03, 1998 at 12:23:51 (1)
- Re: Becoming a Model "A" judge?? - John Icenhower Sep. 03, 1998 at 16:12:54 (0)
Mitchell Overdrive - Dan Sep. 03, 1998 at 07:46:29 (3)
- Re: Mitchell Overdrive - Dick Sparks Sep. 03, 1998 at 11:00:32 (0)
- Re: Mitchell Overdrive - Tim Wildey Sep. 03, 1998 at 08:02:30 (1)
  - Re: Mitchell Overdrive - Fred Engelman Sep. 07, 1998 at 18:25:09 (0)
parts wanted - Darrell Henning Sep. 02, 1998 at 21:24:13 (0)
Manual for original data and rebuilding 29 - Jerry Lawrey Sep. 02, 1998 at 20:04:33 (6)
- Re: Manual for original data and rebuilding 29 - Vincent Scalabrino Sep. 04, 1998 at 00:11:30 (0)
- question about town sedan - Brian Burkert Sep. 03, 1998 at 22:45:24 (0)
- Re: Manual for original data and rebuilding 29 - John Icenhower Sep. 03, 1998 at 10:25:51 (0)
- Re: Manual for original data and rebuilding 29 - Rick Black Sep. 03, 1998 at 09:10:07 (0)
- Re: Manual for original data and rebuilding 29 - jim mason Sep. 03, 1998 at 06:48:28 (0)
- Re: Manual for original data and rebuilding 29 - Joel Huffman Sep. 03, 1998 at 05:39:54 (0)
engine misfiring and backfire - fixed! - Bruce Marshall Sep. 02, 1998 at 17:03:30 (1)
- Re: engine misfiring and backfire - fixed! - David Dewey Sep. 02, 1998 at 22:25:30 (0)

Updated 9:12pm Sunday, Nov. 15th, 1998

For comments, questions, suggestions, or additional information, direct your
correspondence to Dale Clinton via E-mail at <model-a@ahooga.com>.

This page has [an error occurred while processing this directive] since Aug. 26th, 2001.

"Ford Model-A" Message BoardArchive 13

Messages from Sep. 2nd, 1998 to Sep. 24th, 1998

Archived Messages:

"Ford Model-A" Message Board
Archive 13