"Ford Model-A" Message Board
Archive 08

Messages from Mar. 2nd, 1998 to Apr. 17th, 1998

Archived Messages:

shocks - George StewartApr. 17, 1998 at 17:08:03 (2)
- Re: shocks - DJ.Voyce Apr. 17, 1998 at 15:04:23 (0)
- Re: shocks - Rick Black Apr. 16, 1998 at 23:04:22 (0)
Modern Shock Installation For Touring - Bob Bidonde Apr. 16, 1998 at 08:39:09 (2)
- Re: Modern Shock Installation For Touring - Ed Rohmer Apr. 16, 1998 at 18:55:07 (0)
- Re: Modern Shock Installation For Touring - Ed Rohmer Apr. 16, 1998 at 18:45:53 (0)
rotor arm gap - John Winchester Apr. 16, 1998 at 00:13:01 (5)
- Re: rotor arm gap - Doug Linden Apr. 16, 1998 at 12:31:41 (0)
- Re: Rotor Arm Gap - Bob Bidonde Apr. 16, 1998 at 07:05:22 (2)
  - Re: Rotor Arm Gap - DJ.Voyce Apr. 17, 1998 at 01:19:09 (0)
  - Distributor body gap - Rick Black Apr. 16, 1998 at 09:31:01 (0)
- Re: rotor arm gap - Tom Olson Apr. 16, 1998 at 00:18:37 (0)
Adjusting Tie Rod Ends & Drag Link - Anthony Gal Apr. 15, 1998 at 15:55:42 (1)
- Re: Adjusting Tie Rod Ends & Drag Link - Bob Carabbio Apr. 15, 1998 at 23:50:47 (0)
USING A THERMOSTAT.......OR NOT? - Ken Smith Apr. 15, 1998 at 15:30:24 (6)
- Re: USING A THERMOSTAT.......OR NOT? - DJ.Voyce Apr. 17, 1998 at 14:46:54 (0)
- Re: USING A THERMOSTAT.......OR NOT? - H. L. Chauvin Apr. 16, 1998 at 18:42:37 (0)
- Re: USING A THERMOSTAT.......OR NOT? - Bob Bidonde Apr. 16, 1998 at 08:30:30 (0)
- Re: USING A THERMOSTAT.......OR NOT? - Joe Apr. 16, 1998 at 07:38:27 (0)
- Use a themostat - Bob Carabbio Apr. 15, 1998 at 23:28:20 (0)
- Re: USING A THERMOSTAT.......OR NOT? - Bob Johnson Apr. 15, 1998 at 17:38:29 (0)
1931 Model A - William Hagedorn Apr. 15, 1998 at 13:49:31 (0)
Seat Belts for the Rumble Seat? - Rick Botti Apr. 15, 1998 at 13:33:43 (0)
repro rear spring installation - mike taylor Apr. 15, 1998 at 08:11:22 (5)
- Re: repro rear spring installation - Joe Apr. 15, 1998 at 12:44:20 (4)
  - Re: repro rear spring installation - Glen Weilbaker Apr. 15, 1998 at 15:11:46 (3)
    - Re: repro rear spring installation - Joe Apr. 16, 1998 at 06:53:41 (2)
      - Joe - Glen Weilbaker Apr. 16, 1998 at 12:24:29 (0)
      - Re: repro rear spring installation - MIKE TAYLOR Apr. 16, 1998 at 09:30:52 (0)
1928 Phaeton Windshield Frame - Drilling of Holes - Bob McDonald Apr. 15, 1998 at 01:13:07 (1)
- Re: 1928 Phaeton Windshield Frame - Drilling of Holes - Marco Apr. 15, 1998 at 15:03:38 (0)
Retractable Seat Belts - Where Can I Find Them? - Bob Moore Apr. 14, 1998 at 22:20:24 (9)
- Re: Retractable Seat Belts - Where Can I Find Them? - Doug Linden Apr. 15, 1998 at 12:28:32 (0)
- Re: Retractable Seat Belts - Where Can I Find Them? - H.L.Chauvin Apr. 15, 1998 at 10:44:56 (0)
- Re: Mounting Seat Belts - Jim Apr. 15, 1998 at 10:32:47 (0)
- Re: Retractable Seat Belts - Where Can I Find Them? - Rick Black Apr. 15, 1998 at 00:53:38 (0)
- Re: Retractable Seat Belts - Where Can I Find Them? - Carla Apr. 14, 1998 at 23:11:02 (3)
  - Re: Retractable Seat Belts - Where Can I Find Them? - Gary MacRunnel Apr. 15, 1998 at 00:21:10 (2)
    - Re: Safety - Scott Houtz Apr. 15, 1998 at 10:43:13 (1)
      - Re: Safety - Carla Apr. 15, 1998 at 13:11:27 (0)
- Re: Retractable Seat Belts - Where Can I Find Them? - Bob Carabbio Apr. 14, 1998 at 22:48:41 (0)
Carla--please read. - 'A' Youngster Apr. 14, 1998 at 21:24:44 (8)
- More on the S/W - 'A' Youngster Apr. 15, 1998 at 11:05:57 (4)
  - Re: More on the S/W - Marco Apr. 15, 1998 at 12:23:35 (0)
  - Re: More on the S/W - Marco Apr. 15, 1998 at 12:16:44 (2)
    - Yet More on the S/W - Bob Johnson Apr. 15, 1998 at 12:27:18 (1)
      - Re: Yet More on the S/W - Marco Apr. 15, 1998 at 13:29:09 (0)
- Re: Carla--please read. - Marco Apr. 15, 1998 at 00:26:24 (1)
  - SW Sedan Body Manufacturers - Rick Black Apr. 15, 1998 at 00:49:14 (0)
- Re: Carla--please read. - Carla Apr. 14, 1998 at 22:46:45 (0)
Brakes the way Henry made them - Ray's Model A Repairs Apr. 14, 1998 at 21:12:59 (0)
Brakes the way Henry made them - Ray's Model A Repairs Apr. 14, 1998 at 21:12:00 (2)
- Brakes - Robert Harvey Apr. 16, 1998 at 08:51:52 (1)
  - Re: Brakes - Ray's Model A Repairs Apr. 20, 1998 at 22:58:27 (0)
Model a speedster - Steffen Sigmund Apr. 14, 1998 at 15:43:12 (1)
- Re: Model a speedster - H. L. Chauvin Apr. 14, 1998 at 17:43:04 (0)
1931 Model'A' Deluxe delivery - Bart Off Apr. 14, 1998 at 09:33:24 (0)
Bracing Rods Bracket - Joe Domino Apr. 14, 1998 at 07:40:48 (4)
- Re: Bracing Rods Bracket - Carla Apr. 14, 1998 at 15:48:23 (0)
- Re: Bracing Rods Bracket - DJ.Voyce Apr. 14, 1998 at 11:14:23 (0)
- Re: Bracing Rods Bracket - Bob Carabbio Apr. 14, 1998 at 09:59:40 (0)
- Re: Bracing Rods Bracket - geo shebley Apr. 14, 1998 at 09:46:05 (0)
'31 Slant Windshield w/o Indented Firewall - Anthony Gal Apr. 13, 1998 at 09:16:09 (5)
- Re: '31 Slant Windshield w/o Indented Firewall - Carla Apr. 14, 1998 at 14:53:03 (0)
- Re: '31 Slant Windshield w/o Indented Firewall - 'A' Youngster Apr. 14, 1998 at 13:02:54 (0)
- Re: '31 Slant Windshield w/o Indented Firewall - Bob Bidonde Apr. 14, 1998 at 05:44:26 (0)
- Re: '31 Slant Windshield w/o Indented Firewall - Rick Black Apr. 13, 1998 at 22:08:25 (0)
- Re: '31 Slant Windshield w/o Indented Firewall - Marco Apr. 13, 1998 at 09:37:04 (0)
Model B Intake manifold - Vern Larson Apr. 13, 1998 at 05:54:10 (0)
Emblem on radiator - Ken Verdeyen Apr. 12, 1998 at 21:21:59 (1)
- Re: Emblem on radiator - Marco Apr. 12, 1998 at 23:46:26 (0)
spindle bolt - jim Apr. 12, 1998 at 20:50:05 (4)
- Re: spindle bolt - Marco Tahtaras Apr. 12, 1998 at 23:26:43 (1)
  - Re: spindle bolt - More! - Marco Apr. 13, 1998 at 11:54:03 (0)
- Re: Front Axle - H. L. Chauvin Apr. 12, 1998 at 23:11:31 (0)
- Re: spindle bolt - Dan Partain Apr. 12, 1998 at 22:33:55 (0)
spindle bolt - jim Apr. 12, 1998 at 20:49:29 (0)
28 Model-A Sport Coupe landau iron installation - W. Karlsrud Apr. 12, 1998 at 16:19:16 (0)
Update 1931 Model AA truck for sale - John Ludington Apr. 12, 1998 at 16:14:11 (0)
1931 Model AA stake truck for sale - John Ludington Apr. 12, 1998 at 10:00:57 (4)
- Re: 1931 Model AA stake truck for sale - John Ludington Apr. 12, 1998 at 16:04:31 (0)
- Re: 1931 Model AA stake truck for sale - John Ludington Apr. 12, 1998 at 15:54:44 (0)
- Re: 1931 Model AA stake truck for sale - John Ludington Apr. 12, 1998 at 15:45:11 (1)
  - Re: 1931 Model AA stake truck for sale - John Ludington Apr. 12, 1998 at 15:49:50 (0)
For sale 1929 model A roadster pickup - John Ludington Apr. 12, 1998 at 09:50:37 (2)
- Re: For sale 1929 model A roadster pickup - craig wallace May 28, 1998 at 16:48:02 (0)
- Re: For sale 1929 model A roadster pickup - John Ludington Apr. 12, 1998 at 16:51:43 (0)
Backfire - Jack Cunningham Apr. 11, 1998 at 10:17:45 (4)
- Re: Backfire - Jack Cunningham Apr. 12, 1998 at 20:16:30 (1)
  - Re: Backfire - Jim ledbetter Apr. 12, 1998 at 20:59:43 (0)
- Re: Backfire - H.L. Chauvin Apr. 12, 1998 at 18:26:53 (0)
- Re: Backfire - Bob Carabbio Apr. 11, 1998 at 13:33:47 (0)
Original seats or not - Ben Apr. 11, 1998 at 08:12:45 (1)
- Re: Original seats or not - Marco Apr. 11, 1998 at 11:51:52 (0)
something to sell - Patsy Pacheco Apr. 11, 1998 at 00:00:55 (1)
- Re: something to sell - Patsy Pacheco Apr. 14, 1998 at 16:18:20 (0)
My Little A Page - Dave McGrady Apr. 10, 1998 at 23:59:30 (1)
- Re: My Little A Page - Dave McGrady Apr. 13, 1998 at 00:50:45 (0)
1931 AA wheel rings - Gary Henry Apr. 10, 1998 at 22:02:23 (0)
Numbers Please - Rick Botti Apr. 10, 1998 at 16:21:16 (6)
- Thanks - Rick Botti Apr. 11, 1998 at 17:25:30 (0)
- Re: Numbers Please - Dave Sturges Apr. 10, 1998 at 19:48:19 (2)
  - Re: Numbers Please - geo shebley Apr. 14, 1998 at 09:33:45 (1)
    - Re: Numbers Please - Dave Sturges Apr. 14, 1998 at 11:22:11 (0)
- Re: Numbers Please - H. L. Chauvin Apr. 10, 1998 at 18:35:46 (0)
- Re: Numbers Please - Paul Apr. 10, 1998 at 17:32:33 (0)
RILEY TWO PORT OHV FOR MODEL A/B FORDS - CHARLIE YAPP Apr. 10, 1998 at 15:58:34 (0)
RILEY TWO PORT OHV FOR MODEL A/B FORDS - CHARLIE YAPP Apr. 10, 1998 at 15:58:28 (0)
Factory Paint Colors for a 1930 Coupe - Allen Cebula Apr. 09, 1998 at 23:58:56 (5)
- all exteroior reds 1998 mustangs an cobras - JOE May 24, 1998 at 12:15:57 (0)
- 1930 Coupe Colors - Rick Black Apr. 10, 1998 at 20:33:11 (1)
  - 1930 Coupe - carolyn ross May 09, 1998 at 20:23:17 (0)
- Re: Factory Paint Colors for a 1930 Coupe - Tim Wildey Apr. 10, 1998 at 08:30:34 (0)
- Re: Factory Paint Colors for a 1930 Coupe - Tom Apr. 10, 1998 at 06:27:02 (0)
grease fittings on 1931 AA truck - Gary Henry Apr. 09, 1998 at 22:18:50 (2)
- Re: grease fittings on 1931 AA truck - Carla Apr. 10, 1998 at 12:23:31 (0)
- Re: grease fittings on 1931 AA truck - Joe Apr. 10, 1998 at 06:49:01 (0)
Price of Model A - 1929 2 door sedan - Dave Lambertson Apr. 09, 1998 at 21:33:41 (1)
- Model A Prices - Rick Black Apr. 10, 1998 at 20:18:57 (0)
higher performance - Ben Apr. 09, 1998 at 20:55:43 (2)
- Engine Specifications - Rick Black Apr. 09, 1998 at 21:34:35 (1)
  - Re: Engine Specificationsjust testing - larry ware Apr. 09, 1998 at 23:05:58 (0)
1929 sport coupe ???????'s - Tony Apr. 09, 1998 at 19:45:24 (1)
- Re: 1929 sport coupe ???????'s - Scott Houtz Apr. 13, 1998 at 10:09:25 (0)
Tires For Blue Ribbon Judging - Dennis Smith Apr. 09, 1998 at 17:40:15 (1)
- Re: Tires For Blue Ribbon Judging - Rick Black Apr. 09, 1998 at 21:27:30 (0)
29 cowlpanel problem - Ben Apr. 09, 1998 at 16:27:03 (0)
1928/29 Phaeton Paint Pattern - Hugh Smith Apr. 08, 1998 at 09:51:22 (1)
- Re: 1928/29 Phaeton Paint Pattern - Marco Apr. 10, 1998 at 11:10:43 (0)
1928/29 Phaeton Paint Pattern - Hugh Smith Apr. 08, 1998 at 09:50:59 (0)
Engine dying on hard stops - Dick Sparks Apr. 08, 1998 at 07:14:23 (2)
- Re: Engine dying on hard stops - Glen Weilbaker Apr. 09, 1998 at 13:07:13 (1)
  - correction - GW Apr. 13, 1998 at 12:48:02 (0)
Engine dying on hard stops - Dick Sparks Apr. 08, 1998 at 07:12:09 (1)
- Re: Engine dying on hard stops - Don Harrington Apr. 14, 1998 at 17:06:20 (0)
RESTORABLE 1931 MODEL A FORD DELUXE TUDOR FOR SALE - Ken Smith for Ed Daniel Apr. 08, 1998 at 05:54:16 (0)
K.R.Wilson Combination machine - Tom Apr. 07, 1998 at 22:55:39 (3)
- Re: K.R.Wilson Combination machine - Don HBarrington Apr. 09, 1998 at 17:44:07 (0)
- Re: K.R.Wilson Combination machine - Tom Apr. 07, 1998 at 23:21:09 (0)
- Re: K.R.Wilson Combination machine - Tom Apr. 07, 1998 at 23:16:06 (0)
Front spring assembling - Frank Canning Apr. 07, 1998 at 22:21:41 (3)
- Re: Front Spring Lubrication - H. L. Chauvin Apr. 08, 1998 at 00:03:10 (0)
- Re: Front spring assembling - Carla Apr. 07, 1998 at 23:49:20 (0)
- Re: Front spring assembling - Mike Flanagan Apr. 07, 1998 at 23:33:37 (0)
Sully Plantation Car Show - George Washinton Chapter, of the Modle A Ford Club Apr. 07, 1998 at 21:49:17 (2)
- Re: Sully Plantation Car Show - Dave Sturges Apr. 08, 1998 at 08:18:03 (0)
- DATE ?? - Tim Wildey Apr. 07, 1998 at 22:06:58 (0)
For Sale:'31 Deluxe Tudor - Not Finished - Bobby Crumpley Apr. 07, 1998 at 20:11:05 (2)
- Re: For Sale:'31 Deluxe Tudor - Not Finished - Mike Flanagan Apr. 07, 1998 at 23:36:55 (1)
  - Re: For Sale:'31 Deluxe Tudor - Not Finished - Bobby Crumpley Apr. 16, 1998 at 14:45:30 (0)
'28 Tudor body balance point! - Dan Apr. 07, 1998 at 18:04:20 (2)
- Lifting Body - Rick Black Apr. 08, 1998 at 09:17:39 (0)
- Re: '28 Tudor body balance point! - Carla Apr. 08, 1998 at 03:07:52 (0)
Firewall Color - Mike Chapman Apr. 07, 1998 at 15:05:01 (5)
- Re: Firewall Color - Marco Apr. 07, 1998 at 15:48:08 (4)
  - Re: Firewall Color - Bob Johnson Apr. 07, 1998 at 17:22:24 (3)
    - Correction - Bob Johnson Apr. 08, 1998 at 09:03:56 (2)
      - Re: Correction - Thanks! - Marco Apr. 10, 1998 at 10:47:33 (1)
        
        Re: Correction - Thanks! - Bob Johnson Apr. 13, 1998 at 09:40:43 (0)
Unrestored 29-31 Roadster - K Forse Apr. 07, 1998 at 12:34:10 (1)
- Model A for Sale - Rick Black Apr. 08, 1998 at 09:09:14 (0)
Pedal Shaft Removal - Follow Up - Ken Apr. 07, 1998 at 12:10:53 (0)
Steering Help Needed - Frank Smallman Apr. 07, 1998 at 08:54:34 (4)
- Thanks-Marco & Glen - Frank Apr. 07, 1998 at 12:23:41 (1)
  - Re: Thanks-Marco & Glen - Marco Apr. 07, 1998 at 13:10:13 (0)
- Re: Steering Help Needed - Glen Weilbaker Apr. 07, 1998 at 11:48:10 (0)
- Re: Steering Help Needed - Marco Tahtaras Apr. 07, 1998 at 10:32:53 (0)
PHAETON - Hugh Smith Apr. 07, 1998 at 08:05:20 (1)
- Price, I got price - Bob Johnson Apr. 07, 1998 at 09:30:10 (0)
N.O.S. 19" RIMS - EMERIC Apr. 06, 1998 at 21:57:43 (0)
Clutch Throw Out Bearing Removal - Jerry Murray Apr. 06, 1998 at 21:08:22 (1)
- Re: Clutch Throw Out Bearing Removal - Bob Carabbio Apr. 06, 1998 at 22:24:12 (0)
steering colume - Jim Ledbetter Apr. 06, 1998 at 20:05:57 (0)
'29 closed cab p/u 4 sale - Peter Fitzpatrick Apr. 06, 1998 at 19:40:23 (1)
- Re: '29 closed cab p/u 4 sale - Richard Gaurie Apr. 22, 1998 at 23:24:22 (0)
Carburetor float levels, Zenith B and Tillotson - Larry Jenkins Apr. 06, 1998 at 14:14:46 (5)
- Re: Carburetor float levels, Zenith B and Tillotson - H. L. Chauvin Apr. 07, 1998 at 00:08:57 (0)
- Re: Carburetor float levels, Zenith B and Tillotson - Glen Weilbaker Apr. 06, 1998 at 14:52:43 (3)
  - Re: Carburetor float levels, Zenith B and Tillotson - Larry Jenkins Apr. 06, 1998 at 18:49:29 (2)
    - Re: Carburetor float levels, Zenith B and Tillotson - Glen Weilbaker Apr. 07, 1998 at 07:26:49 (0)
    - Re: Carburetor float levels, Zenith B and Tillotson - Bob carabbio Apr. 07, 1998 at 00:57:57 (0)
windwings on 1930 town sedan ? - Olenio R. Apr. 06, 1998 at 11:20:45 (4)
- Re: windwings on 1930 town sedan ? - Olenio R. Apr. 07, 1998 at 11:24:12 (0)
- Re: windwings on 1930 town sedan ? - Pat Patterson Apr. 07, 1998 at 09:43:04 (0)
- Re: windwings on 1930 town sedan ? - Jack Richard Apr. 06, 1998 at 18:48:32 (0)
- Re: windwings on 1930 town sedan ? - Bob Johnson Apr. 06, 1998 at 12:42:41 (0)
Water stains from leaking head gasket - Bob east Apr. 06, 1998 at 08:00:37 (2)
- Re: Water stains from leaking head gasket - EMERIC Apr. 06, 1998 at 21:47:50 (0)
- Re: Water stains from leaking head gasket - Joe Apr. 06, 1998 at 08:50:35 (0)
2 Engine serial #'s? - Gary MacRunnel Apr. 06, 1998 at 00:51:10 (1)
- Re: 2 Engine serial #'s? - Dan Partain Apr. 06, 1998 at 01:33:51 (0)
40 Lincoln ring & pinion - Ted Koudys Apr. 05, 1998 at 20:44:36 (0)
Dunkirk swap meet - Barry Apr. 05, 1998 at 20:24:56 (2)
- Re: Dunkirk swap meet - Jim Rogowsky Apr. 06, 1998 at 03:52:15 (0)
- Re: Dunkirk swap meet - Ted Koudys Apr. 05, 1998 at 20:35:01 (0)
Parts For Sale!!! - Marco Tahtaras Apr. 05, 1998 at 18:48:16 (2)
- Re: Parts For Sale!!! - UPDATE - Marco Apr. 06, 1998 at 23:10:24 (1)
  - Re: Parts For Sale!!! - UPDATE - Marco Apr. 10, 1998 at 11:23:40 (0)
towing - John Winchester Apr. 05, 1998 at 18:24:50 (2)
- Re: towing - Tim Wildey Apr. 05, 1998 at 21:00:32 (1)
  - Re: towing - Pat Patterson Apr. 06, 1998 at 20:08:00 (0)
Modern Water Pump Sealer Wanted - Rick Botti Apr. 05, 1998 at 18:24:39 (2)
- Re: Modern Water Pump Sealer Wanted - Mike Flanagan Apr. 05, 1998 at 23:35:41 (1)
  - Re: Modern Water Pump Sealer Wanted - Rick Botti Apr. 08, 1998 at 13:31:25 (0)
Starter Field Coils and also Wheel Straightening - Neil MacGregor Apr. 05, 1998 at 13:15:19 (4)
- Re: Starter Field Coils and also Wheel Straightening - Mike Flanagan Apr. 06, 1998 at 00:27:31 (0)
- Re: Starter Field Coils and also Wheel Straightening - H. L. Chauvin Apr. 05, 1998 at 14:17:18 (2)
  - Re: Starter Field Coils and also Wheel Straightening - Carla Apr. 05, 1998 at 23:47:18 (1)
    - Re: Starter Field Coils and also Wheel Straightening - Joe Apr. 06, 1998 at 06:59:41 (0)
Steering column reassembly, web packing at top of column - Lee White Apr. 05, 1998 at 10:48:54 (4)
- Re: Steering column reassembly, web packing at top of column - Jack Richard Apr. 05, 1998 at 11:51:56 (3)
  - Re: Can I put the packing in after the Steering box is in car? - Lee White Apr. 05, 1998 at 18:28:14 (1)
    - Re: Can I put the packing in after the Steering box is in car? - Marco Apr. 05, 1998 at 18:39:37 (0)
  - Re: Steering column reassembly, web packing at top of column - Marco Apr. 05, 1998 at 12:10:10 (0)
Model B manifolds - Vern Larson Apr. 05, 1998 at 09:53:02 (1)
- Re: Model B manifolds - Duane Storch Apr. 05, 1998 at 12:59:01 (0)
Patent plate - John Icenhower Apr. 04, 1998 at 23:47:04 (0)
Muffler facts and data - Joe Davis/Aries Muffler Apr. 04, 1998 at 22:54:24 (2)
- Re: Muffler facts and data - edward May 14, 1998 at 23:02:28 (0)
- Re: Muffler facts and data - edalicious May 14, 1998 at 23:01:34 (0)
carburetor flooding - Wayne Parker Apr. 04, 1998 at 22:29:10 (2)
- Re: carburetor flooding - Joe Apr. 06, 1998 at 13:03:27 (0)
- Re: carburetor flooding - Marco Apr. 04, 1998 at 23:57:37 (0)
Briggs body stlye? - Mark Gusaas Apr. 04, 1998 at 13:29:42 (2)
- Re: Briggs body stlye? - Jack Richard Apr. 05, 1998 at 11:39:54 (0)
- Re: Briggs body stlye? - Marco Apr. 04, 1998 at 14:18:36 (0)
Cowl lights - Barry Apr. 04, 1998 at 11:13:05 (1)
- Re: Cowl lights - Dale Beckman Apr. 04, 1998 at 18:37:02 (0)
Engines - Mike Flanagan Apr. 04, 1998 at 08:42:42 (2)
- Re: old time mechanics....was engines - jim mason Apr. 04, 1998 at 09:54:33 (1)
  - Re: old time mechanics....was engines - Larry Jenkins Apr. 04, 1998 at 19:24:18 (0)
Source for Original A Parts - Pat Patterson April 03, 1998 at 19:17:16 (0)
28-29 Closed cab PU doors - Toby Whitney April 03, 1998 at 19:15:36 (1)
- Re: 28-29 Closed cab PU doors - Tommy Schwindling April 04, 1998 at 06:30:58 (0)
Sedan Rear Floor Pans - Pat Patterson April 03, 1998 at 19:03:47 (2)
- Re: Sedan Rear Floor Pans - Duane Storch April 03, 1998 at 21:52:32 (1)
  - Re: Sedan Rear Floor Pans - Pat Patterson April 04, 1998 at 09:54:10 (0)
30 Radiator - Steve April 03, 1998 at 12:09:12 (1)
- Re: 30 Radiator - Rick Black April 05, 1998 at 23:20:31 (0)
Clutches Again - MRR April 03, 1998 at 09:39:48 (15)
- Re: Clutches Again & Pressure Plates - DJ.Voyce April 06, 1998 at 08:25:52 (5)
  - Re: Clutches Again & Pressure Plates - Glen Weilbaker April 06, 1998 at 11:40:48 (1)
    - Re: Clutches Again & Pressure Plates - DJ.Voyce April 07, 1998 at 01:25:10 (0)
  - Now that's an answer! - MRR April 06, 1998 at 10:59:21 (2)
    - Re: Now that's an answer! - Joe April 06, 1998 at 13:11:38 (0)
    - Re: Now that's an answer! - geo April 06, 1998 at 11:41:59 (0)
- Re: Clutches Again - Mike Flanagan April 03, 1998 at 22:13:43 (4)
  - Re: Clutches Again - geo April 05, 1998 at 23:47:11 (0)
  - Re: Clutches Again - Joe April 04, 1998 at 20:46:09 (0)
  - Re: Clutches Again - carla April 04, 1998 at 02:18:08 (1)
    - Re: Clutches Again - Mike Flanagan April 04, 1998 at 08:22:24 (0)
- Re: Clutches Again - Glen Weilbaker April 03, 1998 at 14:11:22 (0)
- Re: Clutches Again - geo shebley April 03, 1998 at 12:55:28 (0)
- Re: Clutches Again - Joe April 03, 1998 at 12:15:16 (1)
  - Re: Clutches Again - carla April 03, 1998 at 15:05:48 (0)
Wanted-cabrioletwindow trim - Tony Parisi April 03, 1998 at 09:36:14 (1)
- Re: Wanted-cabrioletwindow trim - Bob Johnson April 03, 1998 at 13:50:51 (0)
Parts needed to complete 1929 Ford Model AA Fire Truck - Tim Rieger April 02, 1998 at 23:49:34 (1)
- Re: Parts needed to complete 1929 Ford Model AA Fire Truck - Pat Patterson April 03, 1998 at 18:41:59 (0)
Butler Chrome Finish - Pat Patterson April 02, 1998 at 22:14:10 (7)
- Thanks, everyone... - Pat Patterson April 03, 1998 at 18:47:37 (0)
- Re: Butler Chrome Finish - Dennis Smith April 03, 1998 at 18:41:29 (0)
- Re: Butler Chrome Finish - Marco April 03, 1998 at 14:53:47 (0)
- Re: Butler Chrome Finish - DJ.Voyce April 03, 1998 at 09:17:20 (1)
  - Re: Butler Chrome Finish - carla April 03, 1998 at 15:32:03 (0)
- Re: Butler Chrome Finish - DJ.Voyce April 03, 1998 at 09:14:15 (0)
- Butler Plating - Rick Black April 02, 1998 at 22:41:53 (0)
"The Equalizer" - front wedge bolt - Wayne Parker April 02, 1998 at 20:14:51 (4)
- Re: "The Equalizer" - front wedge bolt - Derry Suther April 20, 1998 at 20:48:23 (0)
- Equality - MRR April 03, 1998 at 08:10:38 (1)
  - Re: Equality - carla April 03, 1998 at 15:57:35 (0)
- Re: "The Equalizer" - front wedge bolt - H. L. Chauvin April 02, 1998 at 22:47:44 (0)
Frames for Model A street rods - Vince Brant April 02, 1998 at 20:00:09 (1)
- Re: Frames for Model A street rods - Martin Vansant April 04, 1998 at 08:44:58 (0)
1931 PU FOR SALE - Bryan Espenschied April 02, 1998 at 16:36:03 (1)
- Re: 1931 PU FOR SALE - Ed Coleman April 03, 1998 at 09:39:35 (0)
1931 PU FOR SALE - Bryan Espenschied April 02, 1998 at 16:33:50 (0)
1931 PU FOR SALE - Bryan Espenschied April 02, 1998 at 16:33:33 (0)
Diesel Model A power..it runs... - Joel Rapose April 02, 1998 at 10:12:38 (0)
Manifold Heaters - geo shebley, oregon April 02, 1998 at 10:04:39 (4)
- Re: Manifold Heaters - Joel Rapose April 02, 1998 at 14:21:35 (3)
  - Re: Manifold Heaters - Danny Schannep April 02, 1998 at 15:34:15 (2)
    - Re: Manifold Heaters - Doug Linden April 06, 1998 at 12:25:18 (0)
    - Re: Manifold Heaters - Doug Linden April 06, 1998 at 12:18:31 (0)
Two cars for sale - Mike Flanagan April 02, 1998 at 08:35:31 (2)
- Re: Two cars for sale - Luke April 09, 1998 at 14:51:55 (0)
- Re: Two cars for sale, one gone - Mike Flanagan April 02, 1998 at 21:11:46 (0)
Early 28 steering repair - Franz Lynch April 01, 1998 at 22:27:18 (5)
- Re: Early 28 steering repair - Dan Partain April 01, 1998 at 23:47:47 (4)
  - Re: Early 28 steering repair - Glen Weilbaker April 02, 1998 at 07:32:34 (3)
    - Re: Early 28 steering repair - Mike Flanagan April 02, 1998 at 08:23:53 (2)
      - Re: Early 28 steering repair - Glen Weilbaker April 02, 1998 at 13:00:40 (1)
        
        Re: Early 28 steering repair - Mike Flanagan April 02, 1998 at 21:29:39 (0)
Trash Bag Method?? - 'A' Youngster April 01, 1998 at 20:16:21 (3)
- Re: Trash Bag Method?? - Pat Patterson April 01, 1998 at 21:44:23 (0)
- Re: Trash Bag Method?? - Paul Koncak April 01, 1998 at 21:19:39 (1)
  - Re: Trash Bag Method - More - Marco April 01, 1998 at 21:47:00 (0)
Rouge Plant ?? - Tim Wildey April 01, 1998 at 19:43:38 (4)
- Re: Rouge Plant ?? - Doug Thompson April 03, 1998 at 08:00:15 (0)
- Re: Rouge Plant ?? - Ken McGuire April 02, 1998 at 07:42:33 (0)
- Re: Rouge Plant ?? - John Icenhower April 01, 1998 at 21:43:18 (0)
- Re: Rouge Plant ?? - Craig VandenBerg April 01, 1998 at 20:16:25 (0)
1928 MODEL A FORD, BUSINESS COUPE FOR SALE - Darryl April 01, 1998 at 19:18:38 (0)
Paint Code PPG? - Bob Voshell April 01, 1998 at 17:52:51 (2)
- Re: Paint Code PPG? - Jim Mounter April 01, 1998 at 20:31:28 (0)
- Re: Paint Code PPG? - Marco Tahtaras April 01, 1998 at 18:23:36 (0)
MODEL A PICKUP -ANY YEAR - del furnia April 01, 1998 at 13:03:35 (2)
- Re: MODEL A PICKUP -ANY YEAR - John Ludington April 12, 1998 at 20:46:07 (0)
- Re: MODEL A PICKUP -ANY YEAR - Bryan Espenschied April 02, 1998 at 16:44:09 (0)
OSPHO: Has anyone used It - Hugh Smith April 01, 1998 at 08:12:54 (1)
- Re: OSPHO: Has anyone used It - Fred Hoese April 01, 1998 at 21:14:30 (0)
Testing generator parts - Bob East April 01, 1998 at 07:26:39 (2)
- Testing generator parts - Bob Carabbio April 03, 1998 at 22:26:04 (0)
- Re: Testing generator parts - Joel Rapose April 01, 1998 at 10:33:20 (0)
47 conv for sale - Ed Rohmer April 01, 1998 at 05:30:20 (0)
47 conv for sale - Ed Rohmer April 01, 1998 at 05:27:00 (1)
- Re: 47 conv for sale - Frank April 01, 1998 at 06:38:07 (0)
12v radio noises - Ed Rohmer April 01, 1998 at 05:24:19 (3)
- Re: 12v radio noises - Dick Sparks April 01, 1998 at 07:58:35 (0)
- Re: 12v radio noises - Glen Weilbaker April 01, 1998 at 07:25:17 (1)
  - Re: 12v radio noises - Joel Rapose April 01, 1998 at 10:40:52 (0)
mounting tires - Ed Rohmer April 01, 1998 at 05:19:06 (0)
flat spots on tires - DANNY SCHANNEP March 31, 1998 at 23:42:42 (1)
- Re: flat spots on tires - Joe April 01, 1998 at 07:34:52 (0)
looking for model a to buy - Jerry Deringer March 31, 1998 at 21:43:35 (3)
- Re: looking for model a to buy - Bryan Espenschied April 02, 1998 at 16:41:11 (0)
- Model A's for Sale - Rick Black March 31, 1998 at 22:12:53 (1)
  - Re: Model A's for Sale - Joel Rapose April 01, 1998 at 10:13:16 (0)
Auction Reserve - Jack Cunningham March 31, 1998 at 19:43:19 (1)
- Re: Auction Reserve - John Icenhower March 31, 1998 at 21:15:21 (0)
Painting wheels before/after - Bob Voshell March 31, 1998 at 18:49:47 (8)
- Re: Painting wheels before/after - eric johnson April 14, 1998 at 21:42:41 (0)
- Re: Painting wheels before/after - Ted R. April 01, 1998 at 11:05:13 (0)
- Re: Painting wheels before/after - Joel Rapose April 01, 1998 at 10:08:33 (0)
- Re: Painting wheels before/after - Robert Hoops April 01, 1998 at 06:53:17 (0)
- Re: Painting wheels before/after - Paul Koncak March 31, 1998 at 21:54:28 (0)
- Re: Painting wheels before tires - Marco March 31, 1998 at 19:29:26 (0)
- Re: Painting wheels before/after - Jack Richard March 31, 1998 at 19:09:03 (1)
  - Messege Ted R - Bob V April 01, 1998 at 20:49:01 (0)
Difference between Fordor and Fordor Town Sedan - Joe Domino March 31, 1998 at 11:16:06 (3)
- Re: Difference between Fordor and Fordor Town Sedan - John Icenhower March 31, 1998 at 20:58:15 (0)
- Re: Difference between Fordor and Fordor Town Sedan - 'A' Youngster March 31, 1998 at 20:56:29 (0)
- Re: Difference between Fordor and Fordor Town Sedan - Bob Johnson March 31, 1998 at 12:59:14 (0)
1930 Model A Pickup - Pete March 31, 1998 at 10:02:15 (0)
Pedal Shaft Removal - Ken March 31, 1998 at 06:43:21 (1)
- Re: Pedal Shaft Removal - Joe March 31, 1998 at 08:09:06 (0)
Steering wheel - Don March 30, 1998 at 22:31:20 (0)
Need '30 Murray (Std.) Rear Body Apron - Lou Fuchs March 30, 1998 at 20:36:45 (5)
- Re: Need '30 Murray (Std.) Rear Body Apron - Bryan Espenchied April 02, 1998 at 16:54:23 (1)
  - Re: Need '30 Murray (Std.) Rear Body Apron - Marco April 02, 1998 at 17:17:36 (0)
- Re: Need '30 Murray (Std.) Rear Body Apron - Bryan Espenchied April 02, 1998 at 16:52:20 (0)
- Re: Need '30 Murray (Std.) Rear Body Apron - Bryan Espenchied April 02, 1998 at 16:51:39 (0)
- Re: Need '30 Murray (Std.) Rear Body Apron - Bryan Espenchied April 02, 1998 at 16:50:28 (0)
Model "A" cars and parts FOR SALE in Minnesota. - Brian March 30, 1998 at 19:48:29 (2)
- Message for Vern - Brian March 31, 1998 at 09:17:38 (1)
  - Re: Message for Vern - jerry deringer March 31, 1998 at 21:48:27 (0)
Need Advice on Price of a '28 Roadster P/U - Rick Seaman March 30, 1998 at 09:30:30 (3)
- Re: Need Advice on Price of a '28 Roadster P/U - Joel Rapose March 31, 1998 at 09:55:26 (0)
- Re: Need Advice on Price of a '28 Roadster P/U - Bob Johnson March 30, 1998 at 09:57:56 (1)
  - Re: Price of a '28 Roadster P/U POST # 7000 - DJ.Voyce March 30, 1998 at 15:31:46 (0)
Victoria Front Seat Hinge - Bob Bidonde March 30, 1998 at 05:48:54 (0)
towing the Model A - Dick Sparks March 29, 1998 at 22:42:49 (5)
- Re: towing the Model A - Joel Rapose March 31, 1998 at 09:43:48 (0)
- Re: towing the Model A - Eric Lowell March 30, 1998 at 18:41:13 (0)
- Re: towing the Model A - geo. shebley March 30, 1998 at 09:04:25 (1)
  - Re: towing the Model A - Joe March 30, 1998 at 10:29:38 (0)
- Re: Towing the Model A - Bob Bidonde March 30, 1998 at 05:39:03 (0)
Two clutching questions - M RR March 29, 1998 at 21:21:54 (1)
- Re: Two clutching questions - Bob Carabbio March 29, 1998 at 21:43:24 (0)
Difference in Motors/Water pumps - Ron Klamm March 29, 1998 at 20:00:53 (2)
- Re: Difference in Motors/Water pumps - John Icenhower March 29, 1998 at 23:15:22 (0)
- Re: Difference in Motors/Water pumps - Bob Carabbio March 29, 1998 at 21:36:56 (0)
Price I should expect to pay for original Pop Out Switch - Ken Smith March 29, 1998 at 19:39:43 (4)
- Re: Price I should expect to pay for original Pop Out Switch - Joe March 30, 1998 at 08:28:26 (0)
- Re: Price I should expect to pay for original Pop Out Switch - Bob Carabbio March 29, 1998 at 21:31:24 (0)
- Re: Price I should expect to pay for original Pop Out Switch - jim mason March 29, 1998 at 21:19:18 (0)
- Re: Price I should expect to pay for original Pop Out Switch - Lew March 29, 1998 at 20:03:40 (0)
More parts wanted for a 1930 tudor A - Ben March 29, 1998 at 18:49:22 (1)
- Re: More parts wanted for a 1930 tudor A - John Icenhower March 29, 1998 at 23:08:30 (0)
To:Paul Koncak - Tommy Schwindling March 29, 1998 at 14:17:53 (3)
- Re: To:Paul Koncak - Paul Koncak March 29, 1998 at 20:38:15 (2)
  - Re: To:Paul Koncak - T.S. March 30, 1998 at 18:56:57 (0)
  - Re: To:Paul Koncak - Tommy Schwindling March 30, 1998 at 18:53:51 (0)
Model A photo's - Fraser March 29, 1998 at 12:07:47 (2)
- Right site address - Fraser March 29, 1998 at 12:23:43 (1)
  - Ignor the previous, try this - Fraser March 29, 1998 at 12:41:07 (0)
non adjustable brake rods - jim mason March 29, 1998 at 11:16:02 (1)
- Re: non adjustable brake rods - Marco March 29, 1998 at 22:16:46 (0)
Parts wanted - Ben March 29, 1998 at 10:02:26 (0)
using this forum - Jim Sims March 28, 1998 at 20:49:12 (3)
- Re: using this forum - Jim Beley March 30, 1998 at 16:58:40 (0)
- Re: using this forum - Dave Sturges March 29, 1998 at 14:43:48 (0)
- Re: using this forum - Marco March 29, 1998 at 00:09:45 (0)
Tudors for sale in Minnesota. - Brian March 28, 1998 at 20:08:42 (2)
- Email address for name and number... - Brian March 30, 1998 at 18:24:15 (0)
- Re: Tudors for sale in Minnesota. - Vern Larson March 30, 1998 at 12:37:19 (0)
Gas Gauge - Robert March 28, 1998 at 14:59:45 (3)
- Re: Gas Gauge - Don Harrington March 28, 1998 at 16:40:49 (0)
- Re: Gas Gauge - Marco March 28, 1998 at 15:16:00 (0)
- Re: Gas Gauge - Dan Partain March 28, 1998 at 15:05:37 (0)
Model A Parts Suppliers - Brad March 28, 1998 at 13:27:36 (2)
- Re: Model A Parts Suppliers - Joe Cunningham April 01, 1998 at 20:45:55 (0)
- Re: Model A Parts Suppliers - BC March 28, 1998 at 13:42:03 (0)
Retainer piece for windlacing - Cass Stewart March 28, 1998 at 09:26:14 (3)
- Re: Retainer piece for windlacing - Glen Weilbaker March 30, 1998 at 11:41:49 (2)
  - Re: Retainer piece for windlacing - Cass March 31, 1998 at 09:28:36 (1)
    - Re: Retainer piece for windlacing - Marco Tahtaras March 31, 1998 at 22:32:58 (0)
forbidden door window garnish moulding question - doug handran March 28, 1998 at 08:01:44 (2)
- 30 Murray Garnish Mouldings - Rick Black March 28, 1998 at 10:02:23 (1)
  - Re: 30 Murray Garnish Mouldings - Pat Patterson March 28, 1998 at 11:21:55 (0)
U JOINT TO RADIATOR REBUILT - FOR UNDER $2,000!!! March 27, 1998 at 22:15:50 (0)
Forbidden Paint Question - geo. shebley March 27, 1998 at 21:16:30 (5)
- Re: Forbidden Paint Question - Mike Flanagan March 29, 1998 at 08:30:21 (0)
- Paint scheme for '29 Tudor - Jack Richard March 28, 1998 at 19:38:57 (0)
- Re: Forbidden Paint Question - Joel Rapose March 28, 1998 at 14:38:03 (0)
- Re: Forbidden Paint Question - Dennis Smith March 28, 1998 at 11:18:39 (0)
- Re: Forbidden Paint Question - jim mason` March 28, 1998 at 07:00:37 (0)
30-31 rear coupe,roadster,or truck fenders for sale - Tommy Schwindling March 27, 1998 at 21:03:02 (0)
Back to basics - Bill Wilson March 27, 1998 at 20:29:50 (5)
- Re: Back to basics - Craig VandenBerg March 28, 1998 at 09:37:11 (2)
  - Re: Back to basics - Mike Flanagan March 29, 1998 at 08:39:28 (0)
  - Re: Back to basics - Dennis Smith March 28, 1998 at 11:29:19 (0)
- Model "A" Instruction Book - Tim Wildey March 28, 1998 at 05:39:57 (1)
  - Re: Model "A" Instruction Book - Bill Wilson March 28, 1998 at 08:23:13 (0)
Orange County Pancake Breakfast POSTPONED - Rick Black March 27, 1998 at 20:17:00 (0)
Engine stud boil over - Jeff March 27, 1998 at 19:49:28 (3)
- Re: Engine stud boil over - Jack Richard March 28, 1998 at 19:46:25 (0)
- Re: Engine stud boil over - Joel Rapose March 28, 1998 at 11:10:17 (1)
  - Re: Engine stud boil over - Mike Flanagan March 29, 1998 at 08:51:14 (0)
Sheetmetal suppliers - Dan Partain Mar. 27, 1998 at 18:07:12 (0)
'98 Reno Meet - Poll - Marco Tahtaras Mar. 27, 1998 at 14:36:19 (16)
- Re: '98 Reno Meet - Poll - Jim Beley Mar. 30, 1998 at 17:19:03 (1)
  - Re: '98 Reno Meet - Poll - John Icenhower Mar. 30, 1998 at 22:12:31 (0)
- Coming and working on it too! - Jack Richard Mar. 28, 1998 at 10:42:25 (0)
- We're COMING to Reno 1998 - Rick Black Mar. 27, 1998 at 20:18:35 (0)
- Re: '98 Reno Meet - Poll - Dennis Smith Mar. 27, 1998 at 19:51:35 (0)
- Re: '98 Reno Meet - Poll - Rick Botti Mar. 27, 1998 at 19:37:51 (0)
- Re: '98 Reno Meet - Poll - Bob Moore Mar. 27, 1998 at 19:34:49 (0)
- Re: '98 Reno Meet - Poll - Mike Flanagan Mar. 27, 1998 at 19:20:53 (0)
- Re: '98 Reno Meet - Poll - Joel Rapose Mar. 27, 1998 at 19:16:43 (0)
- Re: '98 Reno Meet - Poll - Pat Patterson Mar. 27, 1998 at 18:50:58 (0)
- Re: '98 Reno Meet - Poll - Bob Johnson Mar. 27, 1998 at 18:48:28 (0)
- Re: '98 Reno Meet - Poll - Dan Partain Mar. 27, 1998 at 18:14:49 (1)
  - Re: '98 Reno Meet - Poll - Marco Mar. 28, 1998 at 11:06:09 (0)
- Re: '98 Reno Meet - Poll - Rick Mar. 27, 1998 at 17:16:38 (1)
  - Re: '98 Reno Meet - Poll - Jim Miller Mar. 27, 1998 at 18:07:41 (0)
- Re: '98 Reno Meet - Poll - Greg Hitt Mar. 27, 1998 at 16:12:13 (0)
Width of a 1931 4 door - Jonathan Wineberg Mar. 27, 1998 at 12:33:49 (1)
- Width of a Model A Fordor - Rick Black Mar. 27, 1998 at 20:27:37 (0)
Gas Tank Rust - Bryan Nieman Mar. 27, 1998 at 11:09:33 (7)
- Re: Gas Tank Rust - Joe Mar. 30, 1998 at 14:49:24 (0)
- Re: Gas Tank Rust - H. L. Chauvin Mar. 28, 1998 at 14:45:19 (0)
- Re: Gas Tank Rust - Carla Mar. 27, 1998 at 14:23:27 (0)
- Re: Gas Tank Rust - Scott Houtz Mar. 27, 1998 at 12:05:46 (0)
- Re: Gas Tank Rust - Joel Rapose Mar. 27, 1998 at 11:35:36 (2)
  - Re: Gas Tank Rust - Bob Johnson Mar. 27, 1998 at 16:55:34 (0)
  - Re: Gas Tank Rust - Marco Tahtaras Mar. 27, 1998 at 11:55:40 (0)
Forbidden Message - Neil MacGregor Mar. 27, 1998 at 10:32:26 (0)
Restoring Starter Armature - Neil MacGregor Mar. 27, 1998 at 10:17:00 (4)
- Re: Restoring Starter Armature, Undercutting - HL Chauvin Mar. 28, 1998 at 16:25:28 (0)
- Re: Restoring Starter Armature - DJ.Voyce Mar. 27, 1998 at 23:53:10 (0)
- Re: Restoring Starter Armature - Carla Mar. 27, 1998 at 13:35:45 (0)
- Re: Restoring Starter Armature - Doug Linden Mar. 27, 1998 at 12:14:38 (0)
Any Swap Meets around Houston or Louisiana - Tony Olinger Mar. 26, 1998 at 23:42:23 (0)
Test - Dale Mar. 26, 1998 at 22:59:57 (0)
Test - Dale Mar. 26, 1998 at 22:56:27 (0)
Paint - geo shebley Mar. 26, 1998 at 22:17:00 (0)
door window garnish moulding -- '30 town sedan (155c) - doug handran Mar. 26, 1998 at 20:53:35 (0)
For Sale 1930 Model A Tudor - Cincinnati - Mick Wilz Mar. 26, 1998 at 19:48:33 (0)
Ford Engines: - Rick Pollock Mar. 26, 1998 at 09:05:25 (3)
- Re: Ford Engines: - chase May 10, 1998 at 22:03:29 (0)
- Re: Ford Engines: - Ben Mar. 29, 1998 at 08:14:46 (0)
- Re: Ford Engines: - Bill Wilason Mar. 27, 1998 at 19:09:20 (0)
Jack Identification - Tim Wildey Mar. 26, 1998 at 06:03:43 (1)
- Re: Jack Identification - Mike Flanagan Mar. 26, 1998 at 08:03:48 (0)
29 early AR frame for sale - Tommy Shwindling Mar. 25, 1998 at 20:50:47 (0)
30 model a 4 door sedan for sale body and doors - Tommy Schwindling Mar. 25, 1998 at 20:44:47 (1)
- Re: 30 model a 4 door sedan for sale body and doors - Paul Koncak Mar. 26, 1998 at 18:43:33 (0)
Rear Wheel Bearings - Al Wood Mar. 25, 1998 at 14:54:36 (1)
- Re: Rear Wheel Bearings - DJ.Voyce Mar. 25, 1998 at 23:55:16 (0)
Wheel Bearings - Jim Mar. 25, 1998 at 13:15:33 (4)
- Re: Wheel Bearings - Joe Mar. 26, 1998 at 07:07:21 (1)
  - Re: Wheel Bearings - Bob Carabbio Mar. 26, 1998 at 12:27:25 (0)
- Re: Wheel Bearings - Charlie Booher Mar. 25, 1998 at 15:13:06 (1)
  - Re: Wheel Bearings - JIM Mar. 25, 1998 at 15:33:47 (0)
axel/brakes - Jim Ledbetter Mar. 25, 1998 at 10:28:20 (1)
- Re: axel/brakes - Marco Tahtaras Mar. 25, 1998 at 10:59:13 (0)
Antifreeze - Should it be used? - Don Elson Mar. 25, 1998 at 09:42:44 (3)
- Re: Antifreeze - Should it be used? - Craig VandenBerg Mar. 25, 1998 at 20:05:46 (1)
  - Re: Antifreeze - Should it be used? - C9 Mar. 29, 1998 at 09:28:46 (0)
- Yes, sometimes - Bob Johnson Mar. 25, 1998 at 15:26:50 (0)
Rumble seat lid needed, '30 model A Couplee - Ron Mar. 25, 1998 at 08:19:18 (0)
'30 front fenders needed - Ron Mar. 25, 1998 at 08:04:34 (0)
ENGINE - RUSSELL MICHAUD Mar. 25, 1998 at 05:56:47 (2)
- Re: ENGINE - Jim Mar. 26, 1998 at 09:01:16 (0)
- Re: ENGINE - Joe Mar. 25, 1998 at 07:55:46 (0)
Points - Paul Reid Mar. 25, 1998 at 00:55:29 (3)
- Re: Points - Tim Wildey Mar. 25, 1998 at 22:59:38 (0)
- Re: Points - GW Mar. 25, 1998 at 08:19:58 (0)
- Re: Points - Glen Weilbaker Mar. 25, 1998 at 08:00:47 (0)
Spark Plugs - Duane Storch Mar. 24, 1998 at 23:17:38 (1)
- Re: Spark Plugs - Marco Mar. 25, 1998 at 00:04:33 (0)
wanted 30-coupe body - Dewayne Mar. 24, 1998 at 20:48:39 (0)
wanted-30 coupe - Dewayne Mar. 24, 1998 at 20:41:07 (0)
Model A Restoration Books&Thanks - Brad Mar. 24, 1998 at 17:31:27 (3)
- Re: Model A Restoration Books&Thanks - Pat Patterson Mar. 24, 1998 at 19:26:27 (0)
- Re: Model A Restoration Books&Thanks - Bob Johnson Mar. 24, 1998 at 18:29:07 (0)
- Re: Model A Restoration Books&Thanks - jim mason Mar. 24, 1998 at 18:16:32 (0)
1928 Roadster Pickup for sale - Bob Moore Mar. 24, 1998 at 10:10:56 (0)
Spartan horn - paint color - Frank Smallman Mar. 24, 1998 at 09:49:51 (2)
- Thanks Bob - Frank Mar. 25, 1998 at 07:31:58 (0)
- Spartan horn - paint color - Bob Johnson Mar. 24, 1998 at 11:18:18 (0)
WANTED: 28/29 right front fender - Hugh Smith Mar. 24, 1998 at 09:12:43 (0)
WHAT IS IT? 4 prong fingers in Light Switch Body - Ken Smith Mar. 24, 1998 at 08:29:44 (2)
- Re: WHAT IS IT? 4 prong fingers in Light Switch Body - Joe Mar. 24, 1998 at 10:24:35 (0)
- Re: WHAT IS IT? 4 prong fingers in Light Switch Body - Marco Mar. 24, 1998 at 09:54:22 (0)
Engines - Mike Flanagan Mar. 24, 1998 at 08:04:39 (3)
- Re: Engines - H L Chauvin Mar. 30, 1998 at 19:18:54 (0)
- Re: Engines - Bill Wilson Mar. 27, 1998 at 19:26:33 (0)
- Re: Engines - Bryan Nieman Mar. 27, 1998 at 14:53:24 (0)
EARLY 28 STEERING REPAIR - FRANZ LYNCH Mar. 23, 1998 at 21:58:11 (4)
- Re: EARLY 28 STEERING REPAIR - Mike Flanagan Mar. 25, 1998 at 00:44:32 (1)
  - Re: EARLY 28 STEERING REPAIR - Joe Mar. 25, 1998 at 08:51:12 (0)
- Re: EARLY 28 STEERING REPAIR - Carla Mar. 24, 1998 at 15:45:10 (0)
- Re: EARLY 28 STEERING REPAIR - Glen Weilbaker Mar. 24, 1998 at 07:59:03 (0)
EARLY 28 STEERING REPAIR - FRANZ LYNCH Mar. 23, 1998 at 21:31:29 (0)
1931 Model AA truck Windshied wiper vac. motor. - Martin Palmer Mar. 23, 1998 at 21:20:56 (1)
- Vacuum Wiper Rebuild - Rick Black Mar. 24, 1998 at 01:04:02 (0)
Roadster door filler ? - Joel Rapose Mar. 23, 1998 at 15:58:41 (3)
- Re: Roadster door filler - Alex Billson Mar. 26, 1998 at 22:55:54 (0)
- Re: Roadster door filler ? - Carla Mar. 23, 1998 at 16:24:48 (1)
  - Re: Roadster door filler ? - Ted Kafer Mar. 24, 1998 at 22:49:58 (0)
Tom-send drawings here! - Brad Mar. 23, 1998 at 15:12:17 (0)
28/29 Fender ,Right side front w/ well - Hugh Smith Mar. 23, 1998 at 14:59:51 (0)
Fender Repairs - Rick Botti Mar. 23, 1998 at 14:29:14 (1)
- Re: Fender Repairs - Doc Mar. 24, 1998 at 00:42:26 (0)
Woodgrain - David Bockman Mar. 23, 1998 at 10:46:12 (2)
- Re: Woodgrain - Bob Johnson Mar. 23, 1998 at 10:54:52 (0)
- Re: Woodgrain - Dave Sturges Mar. 23, 1998 at 10:54:48 (0)
Engine Mounts - Keith Cross Mar. 23, 1998 at 08:32:07 (7)
- Re: Engine Mounts - Carla Mar. 23, 1998 at 17:01:49 (6)
  - Re: Engine Mounts - Mike Flanagan Mar. 25, 1998 at 00:54:24 (0)
  - Re: Engine Mounts - Pat Patterson Mar. 23, 1998 at 19:58:47 (4)
    - Re: Engine Mounts - confused Mar. 23, 1998 at 22:32:36 (3)
      - Originally- - Bob Carabbio Mar. 24, 1998 at 20:21:24 (0)
      - Re: Engine Mounts - Carla Mar. 24, 1998 at 17:16:48 (1)
        
        Re: Engine Mounts - Mike Flanagan Mar. 25, 1998 at 01:28:21 (0)
Horn rattle - Murray Le Breton Mar. 23, 1998 at 06:08:42 (4)
- Re: Horn rattle - Alex Billson Mar. 24, 1998 at 20:00:28 (0)
- Re: Horn rattle - more - Marco Mar. 24, 1998 at 01:24:42 (0)
- Re: Horn rattle - Alex Billson Mar. 23, 1998 at 16:55:14 (0)
- Re: Horn rattle -
  Marco nted. - Mike Flanagan Mar. 22, 1998 at 11:32:13 (0)
28-29 hood for sale - Tommy Schwinding Mar. 22, 1998 at 11:31:54 (3)
- Re: 28-29 hood for sale - Rick Black Mar. 22, 1998 at 22:46:39 (2)
  - Re: 28-29 hood for sale - Tommy Schwindling Mar. 23, 1998 at 05:22:09 (1)
    - Re: 28-29 hood for sale(SOLD) - Tommy Schwndling Apr. 04, 1998 at 06:38:59 (0)
Swapmeet - Mike Flanagan Mar. 22, 1998 at 11:26:57 (9)
- Re: Swapmeet - Paul K Mar. 22, 1998 at 21:04:50 (6)
  - Re: Swapmeet - Gordon Biggar Mar. 23, 1998 at 22:36:27 (5)
    - Re: Swapmeet - Mike Flanagan Mar. 24, 1998 at 07:59:43 (4)
      
      Re: Swapmeet - Jack thompson May 03, 1998 at 08:48:02 (0)
      
      Re: Swapmeet - Bob Carabbio Mar. 25, 1998 at 11:39:57 (2)
      
      Re: Swapmeet - Dennis Smith Mar. 25, 1998 at 18:31:10 (1)
      
      Re: Swapmeet - John Icenhower Mar. 27, 1998 at 21:49:00 (0)
- Re: Swapmeet - Tommy Schwindling Mar. 22, 1998 at 11:46:24 (0)
- Re: Swapmeet - Tommy Schwindling Mar. 22, 1998 at 11:40:01 (0)
Tudor rear subrails for sale (new) - Tommy Schwindling Mar. 22, 1998 at 11:23:04 (0)
28-29 Tudor frt and rear fenders - Tommy Schwindling Mar. 22, 1998 at 11:00:03 (1)
- Re: 28-29 Tudor frt and rear fenders(SOLD) - Tommy Schwindling Apr. 04, 1998 at 06:43:10 (0)
Tim Wildey; Oil level & leaker. - Mike Flanagan Mar. 22, 1998 at 09:48:18 (1)
- Thanks to Mike - Tim 'Wildey Mar. 22, 1998 at 13:39:32 (0)
Model A Ford restoring - Steve Mar. 22, 1998 at 08:53:55 (2)
- Re: Model A Ford restoring - Dave Sturges Mar. 22, 1998 at 09:45:25 (1)
  - Re: Model A Ford restoring - Steve Marsden Mar. 23, 1998 at 18:34:45 (0)
Russian A's - greg Weast Mar. 22, 1998 at 00:42:51 (2)
- Re: Russian A's - John Icenhower Mar. 22, 1998 at 23:58:42 (0)
- Re:I have one of their engines - Joel Rapose Mar. 22, 1998 at 09:49:29 (0)
Parts for Sale - Rick Black Mar. 22, 1998 at 00:38:23 (0)
'30 Coupe for sale - Jim Mounter Mar. 21, 1998 at 21:29:29 (0)
Where Goeth The Welt? - Malcolm Fischer Mar. 21, 1998 at 17:19:44 (3)
- Re: Where Goeth The Welt? - Marco Mar. 21, 1998 at 18:43:10 (2)
  - Re: Where Goeth The Welt? - Malcolm Fischer Mar. 22, 1998 at 12:18:21 (1)
    - Re: Where Goeth The Welt? - Marco Mar. 22, 1998 at 13:55:38 (0)
'30 tudor sedan bucket seats fs - Ron Mar. 21, 1998 at 16:06:17 (0)
Can't Believe It! - Brad Mar. 21, 1998 at 15:05:02 (11)
- Re: Can't Believe It! - Brian Sprayson Apr. 02, 1998 at 13:15:17 (0)
- Re: Can't Believe It! - Brian Sprayson Apr. 02, 1998 at 13:12:28 (0)
- Re: Can't Believe It! - Jerome Bokelmann Mar. 23, 1998 at 13:11:39 (0)
- Re: Can't Believe It! - MARTIN VANSANT Mar. 23, 1998 at 11:51:33 (0)
- Re: Can't Believe It! - Bob Johnson Mar. 23, 1998 at 10:12:35 (0)
- Re: M.A.F.F.I. - Dave Sturges Mar. 22, 1998 at 10:01:23 (1)
  - Re: M.A.F.F.I. - Dennis Pierce Mar. 23, 1998 at 23:35:58 (0)
- Fordor Wood - Rick Black Mar. 22, 1998 at 00:28:42 (0)
- Re: Can't Believe It! - doug handran Mar. 21, 1998 at 22:17:38 (1)
  - Fordor Wood - Rick Black Mar. 22, 1998 at 00:25:53 (0)
- Re: Can't Believe It! - Marco Tahtaras Mar. 21, 1998 at 15:52:20 (0)
Oil Level ??? - Tim Wildey< b1, 1998 at 21, 1998 at 14:58:44 (5)

Re: Oil Level ??? - Mike Flanagan Mar. 21, 1998 at 20:48:07 (0)

Re: Oil Level ??? (Final Correction, Please Read) - Tim Wildey Mar. 21, 1998 at 16:04:41 (1)

Re: Oil Level ? Experience - H.L. Chauvin Mar. 21, 1998 at 20:45:30 (0)

Re: Oil Level ??? (Corrected Information) - Tim Wildey Mar. 21, 1998 at 15:04:42 (0)

Re: Oil Level ??? - Tim Wildey Mar. 21, 1998 at 15:01:44 (0)
Schrader tire pressure gauge - d Mar. 21, 1998 at 09:57:26 (0)
1928AR Cowl Lacing - Dan Standifer Mar. 20, 1998 at 16:53:52 (1)

Re: 1928AR Cowl Lacing - Marco Tahtaras Mar. 20, 1998 at 18:12:44 (0)
picture - jim Mar. 20, 1998 at 09:29:56 (1)

Model A Pictures - Rick Black Mar. 20, 1998 at 20:05:14 (0)
Installing engine question - Fred Murphy Mar. 20, 1998 at 02:17:46 (5)

Re: Installing engine question - Jack Richard Mar. 21, 1998 at 16:10:06 (0)

Re: Installing engine question - DJ.Voyce Mar. 21, 1998 at 03:26:30 (0)

Re: Installing engine question - Doug Linden Mar. 20, 1998 at 14:04:05 (0)

Re: Installing engine question - Joe Mar. 20, 1998 at 08:24:51 (0)

Re: Installing engine question - Glen Weilbaker Mar. 20, 1998 at 07:58:36 (0)
Youth Correspondence - Brian Mar. 19, 1998 at 22:21:20 (23)

Re: Youth Correspondence - John A. Niekamp Apr. 17, 1998 at 00:18:47 (0)

Re: Youth Correspondence - Matt Schadt Apr. 11, 1998 at 23:26:55 (0)

Re: Youth Correspondence - jeff Mar. 21, 1998 at 21:54:58 (0)

Re: Youth Correspondence - jim mason Mar. 20, 1998 at 22:43:48 (0)

Re: Youth Correspondence - Jonathan Knudsen Mar. 20, 1998 at 22:12:10 (0)

Re: Youth Correspondence - Mark Earl Mar. 20, 1998 at 21:09:38 (0)

Re: Youth Correspondence - Brian Burkert Mar. 20, 1998 at 14:24:08 (0)

Re: Youth Correspondence - Greg Hitt Mar. 20, 1998 at 13:02:02 (0)

Re: Youth Correspondence - Brad Mar. 20, 1998 at 12:22:50 (0)

Re: Youth Correspondence - Scott Houtz Mar. 20, 1998 at 11:58:16 (1)

"I did it." - Brian Mar. 20, 1998 at 14:05:07 (0)

Re: Youth Correspondence - geo shebley Mar. 20, 1998 at 11:07:48 (1)

Re: Youth Correspondence - Marco Mar. 20, 1998 at 13:23:03 (0)

Re: Youth Correspondence - Anthony Gal Mar. 20, 1998 at 09:24:40 (0)

Re: Youth Correspondence - Jerome Bokelmann Mar. 20, 1998 at 08:53:40 (0)

Re: Youth Correspondence - J. Paine Mar. 20, 1998 at 08:25:00 (4)

Street rods ? - Bob Johnson Mar. 20, 1998 at 14:17:57 (3)

JUST SERCHING THE NET FOR 1931 MODEL A - JUDY MCMILLAN Apr. 17, 1998 at 20:59:37 (2)

havn't decided yet to chop or not - al cross Apr. 27, 1998 at 13:51:33 (0)

havn't decided yet to chop or not - al cross Apr. 27, 1998 at 13:51:28 (0)

Re: Youth Correspondence - Rick Black Mar. 20, 1998 at 00:14:13 (0)

Re: Youth Correspondence - Scott Mar. 19, 1998 at 23:47:07 (0)

Re: Youth Correspondence - doug handran Mar. 19, 1998 at 23:14:09 (0)
Need 155-C measurements - Jeff Mar. 19, 1998 at 21:08:34 (2)

Re: Need 155-C measurements - Fred Murphy Mar. 20, 1998 at 01:26:37 (0)

Re: Need 155-C measurements - Rick Black Mar. 20, 1998 at 00:09:25 (0)
Water Pump - Al Wood Mar. 19, 1998 at 19:30:15 (1)

Re: Water Pump - John Icenhower Mar. 19, 1998 at 23:37:24 (0)
WANTED: Striker plates for '31 S/W Town Sedan - Don Elson Mar. 19, 1998 at 19:10:00 (3)

Re: WANTED: Striker plates for '31 S/W Town Sedan - Bob Carabbio Mar. 22, 1998 at 21:11:46 (2)

Re: WANTED: Striker plates for '31 S/W Town Sedan - Don Elson Mar. 23, 1998 at 13:34:12 (1)

Bratton strikers - Bob Carabbio Mar. 23, 1998 at 17:51:23 (0)
Timing Cover Rope Seal: A Finale - Gordon Biggar Mar. 19, 1998 at 18:34:04 (2)

Re: Not Useless at all. - Joe Mar. 20, 1998 at 08:34:28 (0)

Re: Timing Cover Rope Seal: A Finale - Dave Sturges Mar. 19, 1998 at 20:44:48 (0)
1928AR Sports Coupe info - Michael Hicks Mar. 19, 1998 at 17:16:58 (4)

Re: 1928AR Sports Coupe info, THANKS - Michael Hicks Mar. 22, 1998 at 17:40:20 (0)

Re: 1928AR Sports Coupe info - Hugh Smith Mar. 20, 1998 at 10:32:56 (0)

Re: 1928AR Sports Coupe info - Bob Johnson Mar. 19, 1998 at 17:59:13 (1)

Picture of Sports Coupe - Bob Johnson Mar. 19, 1998 at 18:07:34 (0)
1928AR Sports Coupe info - Michael Hicks Mar. 19, 1998 at 17:11:23 (7)

Re: 1928AR Sports Coupe info - Rick Black Mar. 20, 1998 at 19:54:52 (0)

Re: 1928AR Sports Coupe info - Marco Tahtaras Mar. 20, 1998 at 15:58:57 (0)

Re: 1928AR Sports Coupe info - Scott Houtz Mar. 20, 1998 at 15:28:40 (3)

Re: 1928AR Sports Coupe info - Marco Mar. 20, 1998 at 16:05:34 (0)

1930 Sports Coupe picture - Scott Mar. 20, 1998 at 15:57:21 (0)

1928 Sports Coupe picture - Scott Mar. 20, 1998 at 15:52:55 (0)

Re: 1928AR Sports Coupe info - John Icenhower Mar. 19, 1998 at 23:27:21 (0)
Speed - Brad Mar. 19, 1998 at 16:32:28 (3)

Re: Speed and stopping, etc. - Brian Burkert Mar. 19, 1998 at 21:29:45 (1)

Re: Speed and stopping, etc. - geo. shebley Mar. 20, 1998 at 10:00:18 (0)

Re: Speed - Dave Sturges Mar. 19, 1998 at 20:58:26 (0)
flywheel - jim Mar. 19, 1998 at 14:14:15 (5)

Re: flywheel - JD in AZ Mar. 21, 1998 at 15:22:43 (2)

Re: flywheel - Mike Flanagan Mar. 22, 1998 at 10:12:20 (1)

Re: flywheel - Joe Mar. 24, 1998 at 06:56:57 (0)

Re: flywheel - Joe Mar. 20, 1998 at 09:47:44 (0)

Re: flywheel - John Icenhower Mar. 19, 1998 at 22:56:55 (0)
Trico Vacuum Fan - Frank Smallman Mar. 19, 1998 at 13:21:52 (6)

Spark Plugs - Rick Black Mar. 19, 1998 at 13:45:56 (5)

Re: Spark Plugs - Frank Mar. 19, 1998 at 13:57:49 (4)

Re: Spark Plugs - Joe Mar. 20, 1998 at 10:31:34 (3)

Re: Spark Plugs- Caution - Marco Mar. 20, 1998 at 12:37:36 (0)

Thanks for the JPG - Frank Mar. 20, 1998 at 12:11:38 (1)

Re: Thanks for the JPG - Jeff Johnson Mar. 21, 1998 at 10:29:07 (0)
Stop Me! - geo. shebley Mar. 19, 1998 at 12:32:28 (6)

Re: Stop Me! - Marco Mar. 20, 1998 at 17:56:29 (3)

Re: Stop Me! - more - Marco Mar. 20, 1998 at 18:05:50 (2)

Re: Stop Me! - more - geo Mar. 21, 1998 at 12:03:14 (1)

Re: Stop Me! - more - Marco Mar. 21, 1998 at 12:30:52 (0)

Re: Stop Me! - H.L. Chauvin Mar. 20, 1998 at 00:18:04 (0)

Re: Stop Me! - Glen Weilbaker Mar. 19, 1998 at 13:28:00 (0)
Roadster Body wanted - C-9 Mar. 19, 1998 at 12:14:08 (1)

Re: Roadster Body wanted - Professor Schnitzel Mar. 19, 1998 at 21:53:47 (0)
Cooling Fan Options - Glen Weilbaker Mar. 19, 1998 at 10:14:37 (13)

Re: Cooling Fan Options - Glen Weilbaker Mar. 25, 1998 at 12:04:06 (1)

Re: Cooling Fan Options - Marco Mar. 25, 1998 at 14:28:27 (0)

Re: Cooling Fan Options - Bob Carabbio Mar. 23, 1998 at 18:09:01 (0)

Re: Cooling Fan Options - Bob Johnson Mar. 23, 1998 at 10:29:03 (0)

Thermostat Installation - Tim Wildey Mar. 21, 1998 at 07:36:27 (0)

Thermostat Installation - Tim Wildey Mar. 21, 1998 at 07:28:50 (0)

Re: Cooling Fan Options - John Icenhower Mar. 19, 1998 at 22:48:19 (0)

Thermostat - Tim Wildey Mar. 19, 1998 at 20:48:18 (2)

Re: Thermostat - Glen Weilbaker Mar. 20, 1998 at 07:32:33 (1)

Re: Thermostat - GW Mar. 20, 1998 at 12:52:51 (0)

Re: Cooling Fan Options - Neil Mylar Mar. 19, 1998 at 11:33:15 (1)

Re: Cooling Fan Options - Doug Linden Mar. 19, 1998 at 12:22:28 (0)

Re: Cooling Fan Options - Joe Grobleski Mar. 19, 1998 at 11:29:06 (0)
What were gas prices when Model A's were built? - Anthony Gal Mar. 18, 1998 at 16:37:59 (3)

Re: What were gas prices when Model A's were built? - Dave Sturges Mar. 19, 1998 at 09:36:02 (0)

Re: What were gas prices when Model A's were built? - EMERIC HOWELL Mar. 18, 1998 at 21:56:49 (1)

Re: What were gas prices when Model A's were built? - geo. shebley Mar. 19, 1998 at 11:57:38 (0)
Great Race - Bob O Mar. 18, 1998 at 12:36:46 (1)

Re: Great Race - John Icenhower Mar. 19, 1998 at 01:32:39 (0)
Model A engine fan - Larry Jenkins Mar. 18, 1998 at 10:24:11 (4)

Re: Model A engine fan - Bob Bidonde Mar. 18, 1998 at 16:23:04 (0)

Re: Model A engine fan - Jack Richard Mar. 18, 1998 at 11:16:10 (2)

Re: Model A engine fan - Larry Jenkins Mar. 18, 1998 at 14:46:51 (1)

Re: Model A engine fan - Bruce Wheeler Mar. 18, 1998 at 15:15:15 (0)
The Restorer Magazine - Ray Toledo Mar. 18, 1998 at 09:52:37 (0)
HOOD for 1929 Tourer - Anna Bidgood Mar. 17, 1998 at 21:58:03 (3)

What is a hood ? - Bob Johnson Mar. 18, 1998 at 09:30:33 (0)

Re: HOOD for 1929 Tourer - Glen Weilbaker Mar. 18, 1998 at 09:15:27 (0)

Re: HOOD for 1929 Tourer - Joe Mar. 18, 1998 at 08:30:53 (0)
Hanging a bud vase - Bob Moore Mar. 17, 1998 at 16:34:09 (0)
Shifting Fork Wear - Neil MacGregor Mar. 17, 1998 at 14:51:12 (2)

Re: Shifting Fork Wear - Joe Mar. 18, 1998 at 07:04:20 (0)

Re: Shifting Fork Wear - Gordon Biggar Mar. 17, 1998 at 21:51:19 (0)
Ford Louisville - History - Ken McGuire Mar. 17, 1998 at 12:19:06 (1)

Re: Ford Louisville - History - Dave Sturges Mar. 17, 1998 at 15:08:26 (0)
Babbitt - Jim Hansell Mar. 17, 1998 at 12:14:45 (4)

Re: Babbitt - Don Harrington Mar. 19, 1998 at 17:31:12 (0)

Re: Taunton Publications URL - Joe Mar. 18, 1998 at 07:52:20 (0)

Re: Babbitt - Joe Mar. 18, 1998 at 07:49:18 (0)

Re: Babbitt - John Cannon Mar. 17, 1998 at 19:54:39 (0)
Need a rear axle grease seal for 1931 AA truck - Allan Anderson Mar. 16, 1998 at 21:19:35 (3)

Re: Need a rear axle grease seal for 1931 AA truck - c-9 Mar. 19, 1998 at 11:25:55 (0)

Re: Need a rear axle grease seal for 1931 AA truck - Jim Beley Mar. 17, 1998 at 16:58:25 (0)

Re: Need a rear axle grease seal for 1931 AA truck - Pat Patterson Mar. 16, 1998 at 21:41:11 (0)
Main bearing grooving tool - Ben Jenkinson Mar. 16, 1998 at 20:56:46 (1)

Re: Main bearing grooving tool - John Cannon Mar. 17, 1998 at 11:55:31 (0)
Door Striker Plates for '31 S/W Town Sedan - Don Elson Mar. 16, 1998 at 20:07:53 (0)
Shocks wanted - CECIL RICHARDSON Mar. 16, 1998 at 19:56:46 (2)

Shocks - Rick Black Mar. 18, 1998 at 09:30:26 (0)

Re: Shocks wanted - Rick Botti Mar. 17, 1998 at 15:28:10 (0)
Bob Johnson reply to woodgrain application - Brian Sprayson Mar. 16, 1998 at 18:07:30 (5)

Re: Bob Johnson reply to woodgrain application - John Icenhower Mar. 16, 1998 at 23:06:13 (2)

Be careful around screw holes - Bob Johnson Mar. 18, 1998 at 10:13:57 (1)

Re: Be careful around screw holes - John Icenhower Mar. 19, 1998 at 00:58:40 (0)

Re: Bob Johnson reply to woodgrain application - Paul Koncak Mar. 16, 1998 at 22:09:40 (0)

Re: Bob Johnson reply to woodgrain application - Patrick Patterson Mar. 16, 1998 at 19:34:13 (0)
Overdrive Question - Bob McMullen Mar. 16, 1998 at 15:52:32 (6)

Re: Overdrive Question - Boyce Lee Mar. 19, 1998 at 13:53:39 (0)

Re: Overdrive Question - Bob McMullen Mar. 17, 1998 at 13:03:53 (0)

Re: Overdrive Question - Doug Linden Mar. 17, 1998 at 12:08:38 (0)

Re: Overdrive Question - Joel Rapose Mar. 17, 1998 at 10:08:35 (0)

Re: Overdrive Question - jim mason Mar. 16, 1998 at 17:38:49 (0)

Re: Overdrive Question - Bob Johnson Mar. 16, 1998 at 17:11:10 (0)
Overdrive - Bob McMullen Mar. 16, 1998 at 15:48:16 (0)
Parts for sale/trade - Neil Mylar Mar. 16, 1998 at 14:41:45 (1)

Re: Parts for sale/trade - Neil Mylar Mar. 16, 1998 at 14:44:42 (0)
Front End Shimmy: Could it be my old tires? - Anthony Gal Mar. 16, 1998 at 08:05:52 (9)

Re: Front End Shimmy: Could it be my old tires? - Rick Botti Mar. 17, 1998 at 17:41:48 (0)

Re: Front End Shimmy: Could it be my old tires? - Glen Weilbaker Mar. 17, 1998 at 07:48:24 (0)

Opps wrong URL try this one - Bob Johnson Mar. 16, 1998 at 17:19:20 (2)

OK this time for sure - Bob Johnson Mar. 17, 1998 at 09:33:00 (1)

Re: OK this time for sure - Glen Weilbaker Mar. 17, 1998 at 10:33:51 (0)

Re: Front End Shimmy: Could it be my old tires? - Bob Johnson Mar. 16, 1998 at 17:17:47 (0)

Re: Front End Shimmy: Could it be my old tires? - Carla Mar. 16, 1998 at 15:51:09 (0)

Re: Front End Shimmy: Could it be my old tires? - Joe Mar. 16, 1998 at 08:49:31 (0)

Re: Front End Shimmy: Could it be my old tires? - jim mason Mar. 16, 1998 at 08:15:43 (0)
woodgrain application - Brian Sprayson Mar. 16, 1998 at 06:41:59 (2)

Woodgraining Information - Rick Black Mar. 18, 1998 at 09:24:22 (0)

Re: woodgrain application - Bob Johnson Mar. 16, 1998 at 09:56:03 (0)
Trade round for oval - Tony Olinger Mar. 15, 1998 at 23:00:27 (1)

Re: Trade round for oval - Paul Koncak Mar. 16, 1998 at 09:20:06 (0)
Timing Cover Rope Seal Revisited; Head and Pan Gasket Sealants - Gordon Biggar Mar. 15, 1998 at 18:45:24 (3)

Re: Timing Cover Rope Seal Revisited; Head and Pan Gasket Sealants - DJ.Voyce Mar. 17, 1998 at 00:23:39 (0)

Pan Gasket Sealants - Glen Weilbaker Mar. 16, 1998 at 08:47:45 (0)

Re: Headgaskets - Joe Mar. 16, 1998 at 07:58:20 (0)
headlights - Thomas Kane Mar. 15, 1998 at 14:16:39 (2)

Re: headlights - Marco Mar. 15, 1998 at 14:34:35 (1)

Re: headlights - Thomas Kane Mar. 15, 1998 at 15:16:56 (0)
pedals - Terri Mar. 15, 1998 at 10:19:39 (1)

Re: pedals - Dave Sturges Mar. 15, 1998 at 11:18:36 (0)
ammeter wanter - Jim Ledbetter Mar. 15, 1998 at 01:11:51 (1)

Re: ammeter wanter - Tony Apr. 09, 1998 at 19:28:14 (0)
Timing Pin - Jerry Harrison Mar. 15, 1998 at 00:11:25 (2)

Re: Timing Pin - Carla Mar. 15, 1998 at 02:19:23 (1)

Re: Timing Pin - Carla Mar. 15, 1998 at 03:00:18 (0)
More Generator Mystery - Tony Olinger Mar. 15, 1998 at 00:08:20 (1)

Re: More Generator Mystery - Carla Mar. 15, 1998 at 01:42:57 (0)
FLATHEAD INSTALLATION - JOHN KLEIN Mar. 14, 1998 at 22:17:37 (2)

Re: FLATHEAD INSTALLATION - JOHN KLEIN Mar. 14, 1998 at 22:21:03 (1)

Re: FLATHEAD INSTALLATION - Joel Rapose Mar. 17, 1998 at 17:18:49 (0)
body style of 30 Model A - Cindy Barry Mar. 14, 1998 at 21:11:48 (3)

Re: body style of 30 Model A - DJ.Voyce Mar. 15, 1998 at 23:50:35 (0)

Re: body style of 30 Model A - Brian Burkert Mar. 15, 1998 at 13:58:50 (0)

Re: body style of 30 Model A - Paul K. Mar. 14, 1998 at 21:37:43 (0)
Wanted - 30-31 Sport Coupe Landau Irons - Steve Watrous Mar. 14, 1998 at 18:21:04 (1)

Re: Wanted - 30-31 Sport Coupe Landau Irons - Don Harrington Mar. 17, 1998 at 18:19:30 (0)
hydraulic brake conversion kits for Model A - Mike Mar. 14, 1998 at 16:19:27 (4)

Re: hydraulic brake conversion kits for Model A - John Icenhower Mar. 14, 1998 at 21:15:24 (1)

Re: hydraulic brake conversion kits for Model A - mike Mar. 17, 1998 at 20:18:31 (0)

Re: hydraulic brake conversion kits for Model A - michael hutton Mar. 14, 1998 at 18:27:55 (1)

Re: hydraulic brake conversion kits for Model A - Joel Rapose Mar. 14, 1998 at 20:53:52 (0)
Intake manifold for sale - CECIL RICHARDSON Mar. 14, 1998 at 14:30:25 (0)
pickup chassis - jim Mar. 14, 1998 at 00:30:03 (2)

Re: pickup chassis - Marco Mar. 15, 1998 at 00:58:31 (0)

Re: pickup chassis - Dan Partain Mar. 14, 1998 at 13:04:20 (0)
murray bodies - Carla Mar. 13, 1998 at 18:58:56 (5)

Re: murray bodies - Dave Sturges Mar. 14, 1998 at 11:45:42 (0)

Re: murray bodies - Lew Mar. 13, 1998 at 22:24:51 (0)

Re: murray bodies - Marco Mar. 13, 1998 at 20:48:07 (2)

Re: More - Marco Mar. 14, 1998 at 00:05:50 (0)

Re: shocking - Rick Botti Mar. 11, 1998 at 18:00:57 (0)

Re: shocking - Glen Weilbaker Mar. 11, 1998 at 15:52:57 (0)
Glass Installation Literature? - Joe Davis Mar. 11, 1998 at 09:02:20 (1)

Glass Installation - Rick Black Mar. 13, 1998 at 10:13:42 (0)
Lighting system for 1929 Tourer. - Anna Bidgood Mar. 10, 1998 at 21:47:25 (4)

Re: Lighting system for 1929 Tourer. - Jerome Bokelmann Mar. 11, 1998 at 07:38:58 (0)

Re: Lighting system for 1929 Tourer. - Marco Mar. 10, 1998 at 23:55:23 (0)

Light Switch - Rick Black Mar. 10, 1998 at 23:35:40 (1)

MAFCA Web Site Correction - Rick Black Mar. 10, 1998 at 23:40:28 (0)
Installing Front Crank Pulley Rope Seal in the Timing Cover - Gordon Biggar Mar. 10, 1998 at 21:29:21 (4)

Re: Installing Front Crank Pulley Rope Seal in the Timing Cover - Joe Mar. 11, 1998 at 08:02:13 (2)

Re: Installing Front Crank Pulley Rope Seal in the Timing Cover - Reply to Joe - Gordon Biggar Mar. 11, 1998 at 11:10:05 (1)

Re: Installing Front Crank Pulley Rope Seal in the Timing Cover - Reply to Joe - Joe Mar. 11, 1998 at 14:14:51 (0)

Re: Installing Front Crank Pulley Rope Seal - Marco Tahtaras Mar. 10, 1998 at 22:42:41 (0)
WANTED Model A - Tim Wildey Mar. 10, 1998 at 19:58:46 (1)

Re: WANTED Model A - Brian Burkert Mar. 11, 1998 at 18:41:44 (0)
NOS Spindle Bolts - Duane Storch Mar. 10, 1998 at 17:01:43 (1)

Re: NOS Spindle Bolts - ralph grill Mar. 22, 1998 at 11:42:10 (0)
Joys of Simplicity - Bill Hartmann Mar. 10, 1998 at 12:23:45 (1)

Re: Joys of Simplicity - Thomas Kane Mar. 10, 1998 at 21:08:23 (0)
How tight are body bolts? - Joel Rapose Mar. 10, 1998 at 11:47:34 (2)

Re: How tight are body bolts? - Joe Grobleski Mar. 10, 1998 at 21:27:50 (0)

Re: How tight are body bolts? - Joe Grobleski Mar. 10, 1998 at 21:21:40 (0)
counterweight crank - Wade Mar. 10, 1998 at 08:25:48 (5)

Re: counterweight crank - Carla Mar. 10, 1998 at 16:07:56 (1)

Re: counterweight crank - Marco Mar. 10, 1998 at 16:37:42 (0)

Re: counterweight crank - Rick Botti Mar. 10, 1998 at 14:13:20 (0)

Re: counterweight crank - Joel Rapose Mar. 10, 1998 at 09:37:05 (1)

Amen to that- - Bob Carabbio Mar. 10, 1998 at 10:51:19 (0)
Late 1930 Owners Book FOR SALE - Joe Biller Mar. 10, 1998 at 02:54:35 (0)
Body Wood Sketches - Tony Olinger Mar. 09, 1998 at 23:26:23 (1)

Re: Body Wood Sketches - Dennis Baker Mar. 11, 1998 at 14:54:21 (0)
Muffler Tapered for Model A Ford - Joe Davis Mar. 09, 1998 at 23:13:14 (0)
Shipping a Model A - George Stocking Mar. 09, 1998 at 22:23:11 (1)

Re: Shipping a Model A - Glenn Spyksma Mar. 22, 1998 at 22:22:22 (0)
Specs on 1930 frame - Angie Mar. 09, 1998 at 21:46:13 (1)

Re: Specs on 1930 frame - Dan Partain Mar. 10, 1998 at 00:49:40 (0)
Specs on 1930 frame - Angie Mar. 09, 1998 at 21:46:00 (0)
1928 AR Model A left hand parking brake clevis pin - dave Mar. 09, 1998 at 21:05:05 (4)

Re: 1928 AR Model A left hand parking brake clevis pin - Jack Richard Mar. 10, 1998 at 13:23:51 (1)

Re: 1928 AR Model A left hand parking brake clevis pin - Dave Mar. 10, 1998 at 18:44:13 (0)

Re: 1928 AR Model A left hand parking brake clevis pin - Dave Sturges Mar. 10, 1998 at 08:50:16 (1)

Re: 1928 AR Model A left hand parking brake clevis pin - Dave Mar. 10, 1998 at 18:46:08 (0)
two Doors for sale - Ron Mar. 09, 1998 at 20:36:31 (0)
Parts - Dennis Baker Mar. 09, 1998 at 19:28:53 (4)

Re: Parts - Frank Apr. 02, 1998 at 07:38:12 (0)

Re: Parts - Frank Smallman Mar. 11, 1998 at 10:46:44 (2)

Re: Parts - Dennis Baker Mar. 11, 1998 at 15:23:38 (1)

Re: Parts - Frank Smallman Mar. 12, 1998 at 07:15:42 (0)
looking to buy a shay reproduction 1980 pickup or roadster - bruce barrett Mar. 09, 1998 at 17:01:16 (0)
Early 28 roadster pickup - Franz Lynch Mar. 09, 1998 at 16:39:57 (1)

Re: Early 28 roadster pickup - Jack Richard Mar. 10, 1998 at 13:15:25 (0)
Starter switch - Hugh Smith Mar. 09, 1998 at 14:57:08 (4)

Re: Starter switch for sale - Cecil Richardson Mar. 09, 1998 at 18:42:23 (0)

Re: Starter switch for sale - Cecil Richardson Mar. 09, 1998 at 18:36:08 (0)

Re: Starter switch - Jack Richard Mar. 09, 1998 at 17:08:23 (0)

Re: Starter switch - Rick Black Mar. 09, 1998 at 15:36:14 (0)
HELP - Water in the oil - Anders Andersson Mar. 09, 1998 at 14:32:48 (2)

Re: HELP - Water in the oil - Joel Rapose Mar. 10, 1998 at 09:50:17 (0)

Re: HELP - Water in the oil - Bob Johnson Mar. 09, 1998 at 15:53:41 (0)
parts for sale - Donald Myers Mar. 09, 1998 at 12:39:55 (6)

Re: parts for sale - Jerry Murray Mar. 11, 1998 at 23:23:27 (0)

Re: parts for sale - Carla Mar. 09, 1998 at 14:13:33 (0)

Re: parts for sale - Carla Mar. 09, 1998 at 14:11:27 (3)

Re: advice - Brian Mar. 10, 1998 at 13:33:58 (0)

Re: parts for sale - Joe Mar. 10, 1998 at 06:46:07 (1)

Re: parts for sale - Carla Mar. 10, 1998 at 16:23:58 (0)
Valve chamber cover repair? - Paul Reasenberg Mar. 09, 1998 at 12:14:11 (2)

Re: Valve chamber cover reply!!! - Cecil Richardson Mar. 09, 1998 at 18:31:57 (0)

Re: Valve chamber cover repair? - Carla Mar. 09, 1998 at 14:46:29 (0)
Model A wind wings - Jim Miller Mar. 09, 1998 at 11:39:11 (1)

Re: Model A wind wings - Craig Mar. 09, 1998 at 12:31:34 (0)
'99 MARC National - Ted Koudys Mar. 09, 1998 at 09:15:28 (2)

Re: '99 MARC National - Bob Adams Mar. 21, 1998 at 14:31:27 (0)

Re: '99 MARC National - Dennis Smith Mar. 11, 1998 at 22:07:17 (0)
T.D.C. Found it was EASY - Tim Wildey Mar. 08, 1998 at 22:24:51 (0)
car games - Lew Palmer Mar. 08, 1998 at 20:25:36 (0)
Engine rebuilding - Barry Mar. 08, 1998 at 20:00:25 (3)

Re: Engine rebuilding - Bill Pursel Mar. 09, 1998 at 13:30:15 (0)

Re: Engine rebuilding - Ken Smith Mar. 09, 1998 at 08:31:38 (0)

Re: Engine rebuilding reply - Cecil Richardson Mar. 08, 1998 at 20:43:07 (0)
Wanted: advice - Carla Mar. 08, 1998 at 19:32:04 (4)

Re: Wanted: advice - John Icenhower Mar. 09, 1998 at 16:58:35 (0)

Re: Wanted: advice - paul k Mar. 09, 1998 at 08:11:21 (0)

Re: Wanted: advice - jim mason Mar. 08, 1998 at 22:00:43 (0)

Re: Wanted: advice - Jack Richard Mar. 08, 1998 at 20:50:58 (0)
Wanted: rear window garnish for '30 closed cab pickup. - Del Fast Mar. 08, 1998 at 16:28:20 (1)

Re: Wanted: rear window garnish for '30 closed cab pickup. - Ken Smith Mar. 09, 1998 at 08:20:25 (0)
Sparton horn - Wade Mar. 08, 1998 at 09:44:21 (1)

Re: Sparton horn - John Icenhower Mar. 08, 1998 at 15:18:05 (0)
HOT!!!! coil - Joe Mar. 08, 1998 at 08:40:01 (3)

Re: HOT!!!! coil - jim mason Mar. 08, 1998 at 13:22:32 (0)

Re: HOT!!!! coil - DJ.Voyce Mar. 08, 1998 at 13:18:30 (0)

Re: HOT!!!! coil - Joe Biller Mar. 08, 1998 at 09:52:45 (0)
Crankshaft Drag Revisited - (Joe, Voyce, Bidonde and Purcel) - Gordon Biggar Mar. 08, 1998 at 01:13:20 (2)

Re: Crankshaft Drag Revisited - (Joe, Voyce, Bidonde and Purcel) - DJ.Voyce Mar. 08, 1998 at 13:13:05 (1)

Re: Crankshaft Drag Revisited - (Joe, Voyce, Bidonde and Purcel) - Gordon Biggar Mar. 08, 1998 at 14:03:46 (0)
STARTER SWITCH OR PUSH BUTTON - Tony OLinger Mar. 08, 1998 at 00:30:26 (3)

Re: STARTER SWITCH OR PUSH BUTTON - Carla Mar. 08, 1998 at 17:56:45 (0)

Re: STARTER SWITCH OR PUSH BUTTON - Bill Pursel Mar. 08, 1998 at 15:49:48 (0)

Re: STARTER SWITCH OR PUSH BUTTON - jim mason Mar. 08, 1998 at 08:46:10 (0)
fender welting - JAMES DOUGLAS Mar. 07, 1998 at 21:33:08 (1)

Re: fender welting - Dan Partain Mar. 08, 1998 at 01:31:45 (0)
Steering Box Full? - Al Wood Mar. 07, 1998 at 20:06:14 (3)

Re: Steering Box Full? - Jack Richard Mar. 07, 1998 at 20:21:24 (2)

Re: Steering Box Full? - Brian Burkert Mar. 08, 1998 at 00:07:08 (0)

Re: Steering Box Full? - Brian Burkert Mar. 08, 1998 at 00:02:05 (0)
SOURCE FOR BUYING A 1936 BUICK-40 Series - Ken Smith Mar. 07, 1998 at 19:03:21 (3)

Re: SOURCE FOR BUYING A 1936 BUICK-40 Series - Gary MacRunnel Mar. 08, 1998 at 00:17:11 (0)

Re: SOURCE FOR BUYING A 1936 BUICK-40 Series - Rick Botti Mar. 07, 1998 at 20:56:32 (0)

Re: SOURCE FOR BUYING A 1936 BUICK-40 Series - Tim Wildey Mar. 07, 1998 at 20:49:15 (0)
Parts needed,for sale,trade and questions - Fred Murphy Mar. 07, 1998 at 16:20:49 (0)
Roadster doors - Jim Kamis Mar. 07, 1998 at 15:31:17 (1)

Re: Roadster doors - Paul k Mar. 08, 1998 at 13:40:26 (0)
Engine number - Craig Mar. 07, 1998 at 13:48:14 (1)

Re: Engine number - Tim Wildey Mar. 07, 1998 at 20:35:06 (0)
wheel straighting - Fred Thomas Mar. 07, 1998 at 10:51:14 (0)
Fitting 1928 Phaeton Door Bumper Set - Bob McDonald Mar. 07, 1998 at 01:16:36 (2)

Re: Fitting 1928 Phaeton Door Bumper Set - Marco Mar. 07, 1998 at 08:44:58 (1)

Re: Fitting 1928 Phaeton Door Bumper Set - Bob McDonald Mar. 07, 1998 at 23:28:48 (0)
'30 Tudor For Sale - Tony Sillman Mar. 06, 1998 at 23:07:27 (0)
Looking for two 19" Wheels - Craig Mar. 06, 1998 at 22:39:48 (9)

Re: Looking for two 19" Wheels - jim corliss Mar. 08, 1998 at 09:06:51 (1)

Jim, E-mail Address? - Harold Mar. 09, 1998 at 19:48:15 (0)

Re: Looking for two 19" Wheels - B J Becker Mar. 07, 1998 at 19:43:41 (2)

BJ, E-mail Address? - Harold Mar. 09, 1998 at 19:51:47 (1)

Re: BJ, E-mail Address? - B J Becker Mar. 10, 1998 at 00:27:11 (0)

Re: Looking for two 19" Wheels - Cecil richardson Mar. 07, 1998 at 05:08:04 (1)

Cecil, E-mail Address? - Harold Mar. 09, 1998 at 19:55:02 (0)

Re: Looking for two 19" Wheels - Patrick Patterson Mar. 06, 1998 at 23:07:51 (0)

Re: Looking for two 19" Wheels - Patrick Patterson Mar. 06, 1998 at 23:05:47 (0)
REMOVAL OF RODS FROM HOOD -TO SAVE SIDE LOUVERS - marky Mar. 06, 1998 at 21:53:56 (2)

Re: REMOVAL OF RODS FROM HOOD -TO SAVE SIDE LOUVERS - Cecil Richardson Mar. 07, 1998 at 05:19:04 (0)

Re: REMOVAL OF RODS FROM HOOD -TO SAVE SIDE LOUVERS - Jack Richard Mar. 06, 1998 at 23:03:40 (0)
Timing the A - Tim Wildey Mar. 06, 1998 at 21:36:03 (5)

Whoa! slow down there! - MRR Mar. 09, 1998 at 08:49:36 (0)

Re: Timing the A - Brian Mar. 08, 1998 at 00:20:32 (0)

Re: Timing the A - Carla Mar. 07, 1998 at 21:28:02 (0)

Re: Timing the A - DJ.Voyce Mar. 07, 1998 at 01:25:09 (1)

Re: Timing the A - Gordon Biggar Mar. 07, 1998 at 21:51:11 (0)
Tires for Real Driving - Rick Botti Mar. 06, 1998 at 17:23:00 (2)

Re: Tires for Real Driving - Doug Linden Mar. 09, 1998 at 12:56:01 (0)

Re: Tires for Real Driving - Paul K Mar. 06, 1998 at 21:04:13 (0)
PARTS WANTED 1931 AA TRUCK - GENE GAYNER Mar. 06, 1998 at 16:34:56 (5)

Re: PARTS WANTED 1931 AA TRUCK - dmcsweeney@earthlink.com Mar. 09, 1998 at 00:17:54 (0)

1931 AA Parts - Rick Black Mar. 06, 1998 at 22:27:25 (0)

1931 AA Parts - Rick Black Mar. 06, 1998 at 22:25:40 (0)

Re: PARTS WANTED 1931 AA TRUCK - Dan Partain Mar. 06, 1998 at 18:51:55 (1)

Re: PARTS WANTED 1931 AA TRUCK - gene Mar. 09, 1998 at 16:18:04 (0)
Vendor for Rivets and Bucking Bars - Craig Mar. 06, 1998 at 07:52:03 (3)

Re: Vendor for Rivets and Bucking Bars - Scott Houtz Mar. 06, 1998 at 08:37:05 (0)

Re: Vendor for Rivets and Bucking Bars - jim mason Mar. 06, 1998 at 08:36:55 (0)

Re: Vendor for Rivets and Bucking Bars - Dave Sturges Mar. 06, 1998 at 08:33:49 (0)
What Painting Process to use - Craig Mar. 06, 1998 at 07:49:11 (5)

Re: What Painting Process to use - Bob Bidonde Mar. 12, 1998 at 17:59:52 (0)

Re: What Painting Process to use - Jack Richard Mar. 06, 1998 at 23:19:02 (0)

Re: What Painting Process to use - Marco Mar. 06, 1998 at 12:19:21 (0)

Re: What Painting Process to use - Bob O Mar. 06, 1998 at 12:02:22 (0)

Re: What Painting Process to use - Bob Johnson Mar. 06, 1998 at 09:53:13 (0)
Archive #3?. - DJ.Voyce Mar. 05, 1998 at 23:58:51 (0)
Radiator Shell - Keith Cross Mar. 05, 1998 at 20:21:58 (2)

Re: Radiator Shell - Cecil Richardson Mar. 06, 1998 at 05:28:43 (0)

Re: Radiator Shell - Patrick Patterson Mar. 05, 1998 at 21:15:05 (0)
1930 Tudor Electrical(horn) problem - Frank A. Smallman Mar. 05, 1998 at 12:17:19 (5)

Re: Horn Works - Wife Happy - Frank Smallman Mar. 16, 1998 at 09:07:07 (0)

Re: 1930 Tudor Electrical(horn) problem - Tim Wildey Mar. 05, 1998 at 21:50:07 (0)

Re: 1930 Tudor Electrical(horn) problem - Alex Mar. 05, 1998 at 17:20:50 (0)

Re: 1930 Tudor Electrical(horn) problem - Carla Mar. 05, 1998 at 15:02:30 (0)

Re: 1930 Tudor Electrical(horn) problem - Bob Johnson Mar. 05, 1998 at 14:10:41 (0)
Drive shaft housing - Wade Mar. 05, 1998 at 08:13:18 (4)

Re: Drive shaft housing - Joe Biller Mar. 07, 1998 at 00:22:17 (0)

Re: Drive shaft housing - Joe Gruller Mar. 05, 1998 at 19:00:22 (0)

Re: Drive shaft housing - Joe Gruller Mar. 05, 1998 at 18:59:59 (0)

Re: Drive shaft housing - Bob Carabbio Mar. 05, 1998 at 18:38:55 (0)
More On Carburetor Leaks - Marco Tahtaras Mar. 05, 1998 at 00:41:43 (3)

Re: More On Carburetor Leaks - Jim Rogowsky Mar. 06, 1998 at 01:01:59 (0)

Re: More On Carburetor Leaks - Joe Mar. 05, 1998 at 06:47:32 (1)

Re: More On Carburetor Leaks - DJ.voyce Mar. 05, 1998 at 23:50:34 (0)
Accessory trucks for Model A's - T.Gunter Smith Mar. 04, 1998 at 23:42:42 (0)
AA Parts Wanted - Dean Elliott Mar. 04, 1998 at 21:54:43 (0)
AA Parts Wanted - Dean Elliott Mar. 04, 1998 at 21:54:17 (0)
Clutch freeplay - Keith Mar. 04, 1998 at 19:59:24 (3)

Re: Clutch freeplay - Bill Pursel Mar. 04, 1998 at 21:17:04 (0)

Re: Clutch freeplay - Bill Pursel Mar. 04, 1998 at 21:15:18 (1)

Re: Clutch freeplay - Joel Rapose Mar. 04, 1998 at 21:41:23 (0)
Oil Drain Plug Thread Size - Dick Przywitowski Mar. 04, 1998 at 13:31:08 (2)

Re: Oil Drain Plug Thread Size - Dave Sturges Mar. 04, 1998 at 14:00:29 (1)

Re: Oil Drain Plug Thread Size - Carla Mar. 05, 1998 at 13:56:33 (0)
Crankshaft Drag Desired after Engine Rebuild - Gordon Biggar Mar. 04, 1998 at 00:18:32 (4)

Re: Crankshaft Drag Desired after Engine Rebuild - Bill Pursel Mar. 04, 1998 at 21:01:48 (0)

Re: Crankshaft Drag Desired after Engine Rebuild - Bob Bidonde Mar. 04, 1998 at 12:20:04 (0)

Re: Crankshaft Drag Desired after Engine Rebuild - DJ.Voyce Mar. 04, 1998 at 10:42:41 (0)

Re: Crankshaft Drag Desired after Engine Rebuild - Joe Mar. 04, 1998 at 10:37:16 (0)
Leaky carb and backfiring - Eric Mar. 03, 1998 at 23:31:47 (5)

Re: Leaky carb and backfiring - Jim Rogowsky Mar. 06, 1998 at 01:23:56 (0)

Re: Leaky carb and backfiring - Patrick Patterson Mar. 04, 1998 at 19:33:10 (0)

Thanks for your help guys! I'll let you know! - Eric Mar. 04, 1998 at 09:35:01 (0)

Re: Leaky carb and backfiring - Joe Mar. 04, 1998 at 07:57:17 (0)

Re: Leaky carb and backfiring - Ken Manninen Mar. 04, 1998 at 06:17:44 (0)
details of the sills and back cross-sill - Doug Handran Mar. 03, 1998 at 20:15:37 (1)

Re: details of the sills and back cross-sill - Patrick Patterson Mar. 03, 1998 at 22:28:40 (0)
1940 ford truck parts - bill Mar. 03, 1998 at 19:55:39 (0)
WTB 1930 Plate, restorable, preferably Fla. - Harold Mar. 03, 1998 at 18:54:55 (1)

Re: WTB 1930 Plate, restorable, preferably Fla. - Patrick Patterson Mar. 03, 1998 at 19:59:52 (0)
REAR SPRING - MIKE TAYLOR Mar. 03, 1998 at 13:50:50 (2)

Re: REAR SPRING - Marco Tahtaras Mar. 03, 1998 at 17:38:51 (1)

Re: REAR SPRING - Joel Rapose Mar. 04, 1998 at 16:45:03 (0)
Buying a Model A on the internet - George Stocking Mar. 03, 1998 at 12:43:29 (3)

Re: Buying a Model A on the internet - Jim Sims Mar. 03, 1998 at 19:52:05 (0)

Re: Buying a Model A on the internet - Barry Mar. 03, 1998 at 15:54:57 (0)

Re: Buying a Model A on the internet - Bob Johnson Mar. 03, 1998 at 15:23:08 (0)
What do you need? - MRR Mar. 03, 1998 at 10:18:42 (7)

Re: What do you need? - John Icenhower Mar. 04, 1998 at 22:32:44 (1)

Re: What do you need? - Joe Mar. 05, 1998 at 06:57:49 (0)

Re:Two point door ledge garnish molding for 29 cabriolet, the lower trim under the piece where you rest your arm. - Eldon Dobbe Dob Mar. 04, 1998 at 10:29:43 (0)

Re: What do you need? - Patrick Patterson Mar. 03, 1998 at 19:47:24 (0)

Re: What do you need? - jim mason Mar. 03, 1998 at 12:29:36 (0)

Re: What do you need? - Scott Mar. 03, 1998 at 12:08:07 (0)

Oops! - MRR Mar. 03, 1998 at 10:23:00 (0)
Fan - Jerome Bokelmann Mar. 03, 1998 at 08:38:35 (1)

Re: Fan - Patrick Patterson Mar. 06, 1998 at 22:14:44 (0)
MPH - Jerome Bokelmann Mar. 03, 1998 at 08:31:42 (3)

Rear axel ratio - Jack Richard Mar. 04, 1998 at 10:32:20 (0)

Re: MPH - Joe Mar. 03, 1998 at 10:49:37 (0)

Re: MPH - Dave Sturges Mar. 03, 1998 at 09:24:30 (0)
28AR Brake Cross Shaft - Dave Grove Mar. 02, 1998 at 23:41:29 (2)

Re: 28AR Brake Cross Shaft - Franz Lynch Mar. 09, 1998 at 18:06:32 (0)

Re: 28AR Brake Cross Shaft - Jack Richard Mar. 04, 1998 at 10:17:38 (0)
WHEEL WELL - REPLACEMENT - J.W.Harrison Mar. 02, 1998 at 21:54:47 (1)

Re: WHEEL WELL - REPLACEMENT - Dan Partain Mar. 02, 1998 at 22:22:42 (0)
For Sale:'31 Model A Standard Coupe - Jerry Ehrlick Mar. 02, 1998 at 21:40:14 (2)

Re: For Sale:'31 Model A Standard Coupe - Jerry Ehrlick Mar. 24, 1998 at 21:21:26 (1)

Re: For Sale:'31 Model A Standard Coupe - Jerry Ehrlick Mar. 24, 1998 at 21:28:16 (0)
Are Title Companies Legal? - Jeff Mar. 02, 1998 at 20:54:04 (7)

Re: Are Title Companies Legal? - Scott Mar. 08, 1998 at 12:57:51 (0)

Re: Are Title Companies Legal? - JIM Mar. 06, 1998 at 10:36:12 (0)

Re: Are Title Companies Legal? - geo. shebley Mar. 05, 1998 at 22:08:50 (1)

Re: Are Title Companies Legal? - Scott Mar. 08, 1998 at 12:46:57 (0)

Re: Are Title Companies Legal? - John Icenhower Mar. 04, 1998 at 22:04:02 (0)

Re: Are Title Companies Legal? - Scott Mar. 03, 1998 at 09:46:36 (0)

Re: Are Title Companies Legal? - Bob Carabbio Mar. 03, 1998 at 00:22:16 (0)
Front Seats for '29 Tudor - Glenn Spyksma Mar. 02, 1998 at 20:22:37 (4)

Re: Front Seats for '29 Tudor - Marco Tahtaras Mar. 03, 1998 at 10:38:23 (2)

Re: Front Seats for '29 Tudor - Glenn Spyksma Mar. 04, 1998 at 19:48:36 (1)

Re: Front Seats for '29 Tudor - Brian Burkert Mar. 07, 1998 at 09:21:04 (0)

Re: Front Seats for '29 Tudor - Rick Black Mar. 02, 1998 at 23:37:32 (0)
Landau Bar Knobs - Darrin Shook Mar. 02, 1998 at 18:15:39 (0)
Wanted: Cowl Vent adaptable to a 1929 Model A - Neil Mylar Mar. 02, 1998 at 16:31:59 (0)
Hydraulic Brakes - Hugh Smith Mar. 02, 1998 at 13:51:41 (2)

Re: Hydraulic Brakes - Bob Carabbio Mar. 02, 1998 at 23:40:28 (1)

Re: Hydraulic Brakes - Hugh Smith Mar. 03, 1998 at 09:29:53 (0)

Updated 10:27pm Monday, Nov. 16th, 1998
For comments, questions, suggestions, or additional information, direct your
correspondence to Dale Clinton via E-mail at <model-a@ahooga.com>.
This page has [an error occurred while processing this directive] since Aug. 26th, 2001.

"Ford Model-A" Message BoardArchive 08

Messages from Mar. 2nd, 1998 to Apr. 17th, 1998

Archived Messages:

"Ford Model-A" Message Board
Archive 08